public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 09/13 v3] Makefile.spl: Move generated AT91SAM NAND image boot.bin to spl directory
Date: Tue,  2 Apr 2019 10:57:23 +0200	[thread overview]
Message-ID: <20190402085727.14552-9-sr@denx.de> (raw)
In-Reply-To: <20190402085727.14552-1-sr@denx.de>

This patch moves the AT91SAM NAND booting SPL image "boot.bin" which
includes the ECC values from the root directory into the spl directory,
where all SPL related images are located.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Andreas Bießmann <andreas@biessmann.org>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Tested on the taurus board:
Tested-by: Heiko Schocher <hs@denx.de>
---
v3:
- No change

v2:
- No change

 scripts/Makefile.spl | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
index 54b160d72b..56dbbe127b 100644
--- a/scripts/Makefile.spl
+++ b/scripts/Makefile.spl
@@ -179,10 +179,10 @@ MKIMAGEFLAGS_boot.bin = -T atmelimage
 ifeq ($(CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER),y)
 MKIMAGEFLAGS_boot.bin += -n $(shell $(obj)/../tools/atmel_pmecc_params)
 
-boot.bin: $(obj)/../tools/atmel_pmecc_params
+$(obj)/boot.bin: $(obj)/../tools/atmel_pmecc_params
 endif
 
-boot.bin: $(obj)/u-boot-spl.bin FORCE
+$(obj)/boot.bin: $(obj)/u-boot-spl.bin FORCE
 	$(call if_changed,mkimage)
 else
 ifdef CONFIG_ARCH_ZYNQ
@@ -225,7 +225,7 @@ endif
 endif
 
 ifeq ($(CONFIG_SYS_SOC),"at91")
-ALL-y	+= boot.bin
+ALL-y	+= $(obj)/boot.bin
 endif
 
 ALL-$(CONFIG_SPL_X86_16BIT_INIT) += $(obj)/u-boot-x86-16bit-spl.bin
-- 
2.21.0

  parent reply	other threads:[~2019-04-02  8:57 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-02  8:57 [U-Boot] [PATCH 01/13 v3] arm: at91: Makefile: Compile lowlevel_init only when really necessary Stefan Roese
2019-04-02  8:57 ` [U-Boot] [PATCH 02/13 v3] arm: at91: spl_at91.c: Call spl_early_init() if OF_CONTROL is enabled Stefan Roese
2019-04-02  8:57 ` [U-Boot] [PATCH 03/13 v3] serial: atmel_usart: Use fixed clock value in SPL version with DM_SERIAL Stefan Roese
2019-04-02 10:12   ` Eugen.Hristev at microchip.com
2019-04-02 10:40     ` Stefan Roese
2019-04-02 10:45       ` Eugen.Hristev at microchip.com
2019-04-02 11:21       ` [U-Boot] [PATCH 3/13 v4] " Stefan Roese
2019-04-03 10:52         ` Eugen.Hristev at microchip.com
2019-04-03 10:58           ` Stefan Roese
2019-04-03 11:05             ` Eugen.Hristev at microchip.com
2019-04-03 11:11               ` Stefan Roese
2019-04-02  8:57 ` [U-Boot] [PATCH 04/13 v3] watchdog: Handle SPL build with watchdog disabled Stefan Roese
2019-04-02  8:57 ` [U-Boot] [PATCH 05/13 v3] watchdog: at91sam9_wdt: Fix WDT setup in at91_wdt_start() Stefan Roese
2019-04-02  8:57 ` [U-Boot] [PATCH 06/13 v3] arm: at91: Remove CONFIG_AT91_HW_WDT_TIMEOUT Stefan Roese
2019-04-02 11:19   ` Eugen.Hristev at microchip.com
2019-04-03  5:37   ` [U-Boot] [PATCH 06/13 v4] " Stefan Roese
2019-04-02  8:57 ` [U-Boot] [PATCH 07/13 v3] arm: at91: Enable watchdog support Stefan Roese
2019-04-02 11:26   ` Eugen.Hristev at microchip.com
2019-04-02 11:50     ` Stefan Roese
2019-04-03  5:40       ` Stefan Roese
2019-04-03  5:37   ` [U-Boot] [PATCH 07/13 v4] " Stefan Roese
2019-04-02  8:57 ` [U-Boot] [PATCH 08/13 v3] arm: at91: arm926ejs/u-boot-spl.lds: Add _image_binary_end to SPL lds Stefan Roese
2019-04-02  8:57 ` Stefan Roese [this message]
2019-04-02  8:57 ` [U-Boot] [PATCH 10/13 v3] Makefile: Add Kconfig option CONFIG_SPL_IMAGE to select the SPL binary Stefan Roese
2019-04-03 11:08   ` Eugen.Hristev at microchip.com
2019-04-03 11:11     ` Eugen.Hristev at microchip.com
2019-04-03 11:21       ` Stefan Roese
2019-04-03 12:22         ` Stefan Roese
2019-04-03 12:31           ` Eugen.Hristev at microchip.com
2019-04-03 12:38             ` Stefan Roese
2019-04-03 12:46               ` Eugen.Hristev at microchip.com
2019-04-03 11:19     ` Stefan Roese
2019-04-02  8:57 ` [U-Boot] [PATCH 11/13 v3] arm: at91: siemens: Add support to generate combined SPL+U-Boot image Stefan Roese
2019-04-02  8:57 ` [U-Boot] [PATCH 12/13 v3] arm: at91: at91sam9x5.dtsi: Add watchdog handle Stefan Roese
2019-04-02  8:57 ` [U-Boot] [PATCH 13/13 v3] arm: at91: Add gardena-gateway-at91sam support Stefan Roese

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190402085727.14552-9-sr@denx.de \
    --to=sr@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox