From: Heiko Stuebner <heiko@sntech.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 4/8] rockchip: rk3288: adjust load addresses
Date: Fri, 5 Apr 2019 10:30:09 +0200 [thread overview]
Message-ID: <20190405083013.5473-5-heiko@sntech.de> (raw)
In-Reply-To: <20190405083013.5473-1-heiko@sntech.de>
The rk3288 by default uses memory areas for u-boot and runtime parts like
pxe+scriptfile that we may want to use for secure firmware and thus mark
secure later on. So move the relevant parts a bit away from that.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
include/configs/rk3288_common.h | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h
index 72a54bc0ab..a36aa96b87 100644
--- a/include/configs/rk3288_common.h
+++ b/include/configs/rk3288_common.h
@@ -20,7 +20,7 @@
#ifdef CONFIG_SPL_ROCKCHIP_BACK_TO_BROM
/* Bootrom will load u-boot binary to 0x0 once return from SPL */
#endif
-#define CONFIG_SYS_INIT_SP_ADDR 0x00100000
+#define CONFIG_SYS_INIT_SP_ADDR 0x00300000
#define CONFIG_SYS_LOAD_ADDR 0x00800800
#define CONFIG_SPL_STACK 0xff718000
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_TPL_BOOTROM_SUPPORT)
@@ -48,9 +48,9 @@
/* usb host support */
#define ENV_MEM_LAYOUT_SETTINGS \
- "scriptaddr=0x00000000\0" \
- "pxefile_addr_r=0x00100000\0" \
- "fdt_addr_r=0x01f00000\0" \
+ "scriptaddr=0x00500000\0" \
+ "pxefile_addr_r=0x00600000\0" \
+ "fdt_addr_r=0x5600000\0" \
"kernel_addr_r=0x02000000\0" \
"ramdisk_addr_r=0x04000000\0"
--
2.20.1
next prev parent reply other threads:[~2019-04-05 8:30 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-05 8:30 [U-Boot] [PATCH 0/8] arm-trusted-firmware support for rk3288 Heiko Stuebner
2019-04-05 8:30 ` [U-Boot] [PATCH 1/8] arm: v7: add read_mpidr function for arm32 Heiko Stuebner
2019-04-16 10:29 ` Matthias Brugger
2019-04-05 8:30 ` [U-Boot] [PATCH 2/8] spl: atf: add arm32 variant Heiko Stuebner
2019-04-05 8:30 ` [U-Boot] [PATCH 3/8] rockchip: rk3288: move TPL options to generic position Heiko Stuebner
2019-04-16 9:37 ` Jagan Teki
2019-04-05 8:30 ` Heiko Stuebner [this message]
2019-04-05 8:30 ` [U-Boot] [PATCH 5/8] rockchip: rk3288: reserve first 2MB when build with ATF support Heiko Stuebner
2019-05-07 2:29 ` Kever Yang
2019-04-05 8:30 ` [U-Boot] [PATCH 6/8] rockchip: rk3288: split evb into its two entities Heiko Stuebner
2019-04-05 8:30 ` [U-Boot] [PATCH 7/8] rockchip: rk3288: convert rk3288-evb to use tpl Heiko Stuebner
2019-05-07 2:32 ` Kever Yang
2019-04-05 8:30 ` [U-Boot] [PATCH 8/8] rockchip: rk3288: make both evb variants use atf Heiko Stuebner
2019-05-07 2:28 ` Kever Yang
[not found] ` <526672816.2740575.1557194072777.JavaMail.javamailuser@localhost>
2019-05-07 7:51 ` Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190405083013.5473-5-heiko@sntech.de \
--to=heiko@sntech.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox