[U-Boot] [PATCH] mtd: nand: let the raw NAND devices be compiled upon selection

Miquel Raynal
2018-10-11T09:35:16Z

Today way is to rely on CMD_NAND to be selected and from the root
Makefile compile what is in drivers/mtd/nand/raw.

While this will work most of the time with decent configurations, it
is better to also compile this subsystem upon simple request in the
configuration. Otherwise, a user not selecting CMD_NAND but selecting
NAND and any of the controller drivers will not see their build. Fix
this weird situation by adding a single line in the nand/ directory
Kconfig file.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
drivers/mtd/nand/Makefile | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index a358bc680e..2c33447995 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -2,4 +2,5 @@

nandcore-objs := core.o bbt.o
obj-$(CONFIG_MTD_NAND_CORE) += nandcore.o
+obj-$(CONFIG_NAND) += raw/
obj-$(CONFIG_MTD_SPI_NAND) += spi/
--
2.17.1