From: Markus Klotzbuecher <mk@mkio.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 0/6] miscellaneous ubispl and ubi improvements
Date: Mon, 15 Apr 2019 17:32:00 +0200 [thread overview]
Message-ID: <20190415153206.3472-1-mk@mkio.de> (raw)
From: Markus Klotzbuecher <markus.klotzbuecher@kistler.com>
Hello Heiko and Kyungmin
This series contains a couple of UBI and UBI SPL improvements, notably
a ubispl extension to allow loading volumes by name. The motivation is
to use the UBI atomic volume rename functionality to allow double copy
software updates of U-Boot on UBI. To do that we configured the SPL to
always load the same volume name (e.g. "u-boot"), and the software
updater always installs into the secondary volume "u-boot_r". After a
successful upgrade, these two volume names are switched.
This extension is protected by #ifdefs as it will somewhat slow down
loading of volumes by id. This is because the code needs to disable
the optimization of ignoring all volume ids which are not
to-be-loaded, since these can only be resolved after attaching.
We have tested both with and without fastmap enabled and both paths
seems to work reliably.
I also moved the ubispl config to Kconfig. There seem to be two boards
that use this (Maintainers cc'ed on patch). I have not updated their
defconfigs (not being sure if I should) but would be pleased to do so.
Hamish Guthrie (2):
env: ubi: support configurable VID offset
ubispl: add support for loading volumes by name
Markus Klotzbuecher (4):
env: ubi: KConfig: add CONFIG_ENV_UBI_VOLUME_REDUND
ubi: fix UBI_SILENCE_MSG
ubispl: migrate configuration to Kconfig
ubispl: introduce separate CONFIG_UBI_SPL_SILENCE_MSG
common/spl/Kconfig | 98 ++++++++++++++++
common/spl/spl_ubi.c | 7 ++
drivers/mtd/ubi/Kconfig | 2 +-
drivers/mtd/ubi/io.c | 2 +
drivers/mtd/ubispl/ubispl.c | 215 ++++++++++++++++++++++++++++++++++-
drivers/mtd/ubispl/ubispl.h | 9 +-
env/Kconfig | 12 ++
env/ubi.c | 17 ++-
include/ubispl.h | 6 +
scripts/config_whitelist.txt | 13 ---
10 files changed, 360 insertions(+), 21 deletions(-)
--
2.20.1
next reply other threads:[~2019-04-15 15:32 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-15 15:32 Markus Klotzbuecher [this message]
2019-04-15 15:32 ` [U-Boot] [PATCH 1/6] env: ubi: KConfig: add CONFIG_ENV_UBI_VOLUME_REDUND Markus Klotzbuecher
2019-04-30 4:54 ` Heiko Schocher
2019-05-02 7:15 ` Markus Klotzbuecher
2019-05-09 8:59 ` Markus Klotzbuecher
2019-05-09 11:17 ` Heiko Schocher
2019-05-09 15:49 ` Markus Klotzbuecher
2019-05-09 18:42 ` mk at mkio.de
2019-04-15 15:32 ` [U-Boot] [PATCH 2/6] env: ubi: support configurable VID offset Markus Klotzbuecher
2019-04-30 4:57 ` Heiko Schocher
2019-04-15 15:32 ` [U-Boot] [PATCH 3/6] ubi: fix UBI_SILENCE_MSG Markus Klotzbuecher
2019-04-30 4:59 ` Heiko Schocher
2019-04-15 15:32 ` [U-Boot] [PATCH 4/6] ubispl: migrate configuration to Kconfig Markus Klotzbuecher
2019-04-30 4:59 ` Heiko Schocher
2019-04-15 15:32 ` [U-Boot] [PATCH 5/6] ubispl: add support for loading volumes by name Markus Klotzbuecher
2019-04-30 5:15 ` Heiko Schocher
2019-04-15 15:32 ` [U-Boot] [PATCH 6/6] ubispl: introduce separate CONFIG_UBI_SPL_SILENCE_MSG Markus Klotzbuecher
2019-04-30 5:16 ` Heiko Schocher
2019-04-16 3:52 ` [U-Boot] [PATCH 0/6] miscellaneous ubispl and ubi improvements Heiko Schocher
2019-04-16 4:03 ` Heiko Schocher
2019-04-16 5:14 ` Markus Klotzbuecher
2019-04-17 6:34 ` Markus Klotzbuecher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190415153206.3472-1-mk@mkio.de \
--to=mk@mkio.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox