From: Jonathan Gray <jsg@jsg.id.au>
To: u-boot@lists.denx.de
Subject: [U-Boot] rk3288 SPL size
Date: Tue, 16 Apr 2019 17:12:52 +1000 [thread overview]
Message-ID: <20190416071252.GD16930@largo.jsg.id.au> (raw)
In-Reply-To: <20190416064912.GC16930@largo.jsg.id.au>
On Tue, Apr 16, 2019 at 04:49:12PM +1000, Jonathan Gray wrote:
> On Fri, Apr 05, 2019 at 12:10:21PM +0200, Wadim Egorov wrote:
> > Hi,
> >
> > it seems the new common rockchip pinctrl driver does not really fit into
> > our phycore-rk3288 SPL setup. It works for every other rk3288 based
> > board because they don't need special power configurations at the SPL stage.
>
> It turns out tinker-rk3288 SPL no longer fits in 2019.04 and previously
> worked fine in 2019.01.
>
> Warning: SPL image is too large (size 0x8800) and will not boot
> Error: image verification failed
>
> built with gcc-linaro 6.3.2017.02
>
> bisecting led to the pinctrl changes.
>
> with SPL_PINCTRL_ROCKCHIP disabled it fits and U-Boot output on
> serial gets as far as the efi loader then no output appears on serial
> when a kernel is loaded.
Changing the defconfig to not have CONFIG_SPL_I2C_SUPPORT=y also fits
and also still hangs on loading a kernel.
prev parent reply other threads:[~2019-04-16 7:12 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-05 10:10 [U-Boot] rk3288 SPL size Wadim Egorov
2019-04-05 10:22 ` Heiko Stübner
2019-04-05 17:41 ` Philipp Tomsich
2019-04-16 6:49 ` Jonathan Gray
2019-04-16 7:12 ` Jonathan Gray [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190416071252.GD16930@largo.jsg.id.au \
--to=jsg@jsg.id.au \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox