From: Jagan Teki <jagan@amarulasolutions.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 8/9] dts: Makefile: Build rockchip dtbs based on SoC types
Date: Sun, 28 Apr 2019 14:39:12 +0530 [thread overview]
Message-ID: <20190428090913.10568-9-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20190428090913.10568-1-jagan@amarulasolutions.com>
Sometimes u-boot specific dts nodes or properties can use
from config macros from respective rockchip family include/configs
files, example CONFIG_SPL_PAD_TO.
So, it's better to compile the dtbs based on the respective
rockchip family types rather than rockchip itself to avoid
compilation issues.
This patch organize the existing dtb's based on the rockchip
family types.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/dts/Makefile | 35 ++++++++++++++++++++++++++---------
1 file changed, 26 insertions(+), 9 deletions(-)
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index a2911fa2fd..0f9d6b7d0d 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -60,11 +60,19 @@ dtb-$(CONFIG_KIRKWOOD) += \
dtb-$(CONFIG_ARCH_OWL) += \
bubblegum_96.dtb
-dtb-$(CONFIG_ARCH_ROCKCHIP) += \
- rk3036-sdk.dtb \
- rk3128-evb.dtb \
- rk3188-radxarock.dtb \
- rk3229-evb.dtb \
+dtb-$(CONFIG_ROCKCHIP_RK3036) += \
+ rk3036-sdk.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RK3128) += \
+ rk3128-evb.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RK3188) += \
+ rk3188-radxarock.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RK322X) += \
+ rk3229-evb.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RK3288) += \
rk3288-evb.dtb \
rk3288-fennec.dtb \
rk3288-firefly.dtb \
@@ -77,14 +85,20 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3288-veyron-mickey.dtb \
rk3288-veyron-minnie.dtb \
rk3288-veyron-speedy.dtb \
- rk3288-vyasa.dtb \
- rk3328-evb.dtb \
- rk3399-ficus.dtb \
+ rk3288-vyasa.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RK3328) += \
+ rk3328-evb.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RK3368) += \
rk3368-lion.dtb \
rk3368-sheep.dtb \
rk3368-geekbox.dtb \
rk3368-px5-evb.dtb \
+
+dtb-$(CONFIG_ROCKCHIP_RK3399) += \
rk3399-evb.dtb \
+ rk3399-ficus.dtb \
rk3399-firefly.dtb \
rk3399-gru-bob.dtb \
rk3399-nanopc-t4.dtb \
@@ -96,9 +110,12 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3399-puma-ddr1866.dtb \
rk3399-rock-pi-4.dtb \
rk3399-rock960.dtb \
- rk3399-rockpro64.dtb \
+ rk3399-rockpro64.dtb
+
+dtb-$(CONFIG_ROCKCHIP_RV1108) += \
rv1108-elgin-r1.dtb \
rv1108-evb.dtb
+
dtb-$(CONFIG_ARCH_MESON) += \
meson-gxbb-nanopi-k2.dtb \
meson-gxbb-odroidc2.dtb \
--
2.18.0.321.gffc6fa0e3
next prev parent reply other threads:[~2019-04-28 9:09 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-28 9:09 [U-Boot] [PATCH v2 0/9] rk3399: make u-boot-rockchip-with-spl.bin Jagan Teki
2019-04-28 9:09 ` [U-Boot] [PATCH v2 1/9] Makefile: clean image.map Jagan Teki
2019-04-28 9:09 ` [U-Boot] [PATCH v2 2/9] Makefile: clean bl31_*.bin Jagan Teki
2019-04-28 9:09 ` [U-Boot] [PATCH v2 3/9] travis.yml: Add pyelftools install entry Jagan Teki
2019-04-28 9:09 ` [U-Boot] [PATCH v2 4/9] rockchip: rk3399: Get bl31.elf via BL31 Jagan Teki
2019-04-28 9:09 ` [U-Boot] [PATCH v2 5/9] board: puma: Get bl31.bin via BL31 and rk3399m0.bin via PMUM0 Jagan Teki
2019-05-07 5:01 ` Kever Yang
2019-04-28 9:09 ` [U-Boot] [PATCH v2 6/9] Kconfig: Add u-boot.itb BUILD_TARGET for Rockchip Jagan Teki
2019-04-28 9:09 ` [U-Boot] [PATCH v2 7/9] Makefile.spl: Create u-boot-spl-rockchip.bin for rk3399 Jagan Teki
2019-05-07 6:34 ` Kever Yang
2019-05-07 6:44 ` Jagan Teki
2019-04-28 9:09 ` Jagan Teki [this message]
2019-04-28 9:09 ` [U-Boot] [PATCH v2 9/9] rockchip: rk3399: Create single image using BINMAN Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190428090913.10568-9-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox