From: Andreas Dannenberg <dannenberg@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 03/13] spl: Make image loader infrastructure more universal
Date: Tue, 7 May 2019 12:25:32 -0500 [thread overview]
Message-ID: <20190507172542.31359-4-dannenberg@ti.com> (raw)
In-Reply-To: <20190507172542.31359-1-dannenberg@ti.com>
The current U-Boot SPL image loader infrastructure is very powerful,
able to initialize and load from a variety of boot media however it
is strongly geared towards loading specific types of images in a very
specific way. To address the need being able to use this infrastructure
to load arbitrary image files go ahead and refactor it as follows:
- Refactor existing spl_mmc_load_image function into superset function,
accepting additional arguments such as filenames and media load offset
(same concept can also be applied toother spl_XXX_load_image functions)
- Extend the loader function to "remember" their peripheral initialization
status so that the init is only done once during the boot process,
- Extend the FIT image loading function to allow skipping the parsing/
processing of the FIT contents (so that this can be done separately
in a more customized fashion)
- Populate the SPL_LOAD_IMAGE_METHOD() list with a trampoline function,
invoking the newly refactored superset functions in a way to maintain
compatibility with the existing behavior
This refactoring initially covers MMC/SD card loading (RAW and FS-based).
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
---
common/spl/spl_fit.c | 14 ++++++++
common/spl/spl_mmc.c | 76 +++++++++++++++++++++++++++++---------------
include/spl.h | 26 +++++++++++++++
3 files changed, 91 insertions(+), 25 deletions(-)
diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c
index 87ecf0bb9e..969f7775c1 100644
--- a/common/spl/spl_fit.c
+++ b/common/spl/spl_fit.c
@@ -340,6 +340,16 @@ static int spl_fit_image_get_os(const void *fit, int noffset, uint8_t *os)
#endif
}
+/*
+ * Weak default function to allow customizing SPL fit loading for load-only
+ * use cases by allowing to skip the parsing/processing of the FIT contents
+ * (so that this can be done separately in a more customized fashion)
+ */
+__weak bool spl_load_simple_fit_skip_processing(void)
+{
+ return false;
+}
+
int spl_load_simple_fit(struct spl_image_info *spl_image,
struct spl_load_info *info, ulong sector, void *fit)
{
@@ -389,6 +399,10 @@ int spl_load_simple_fit(struct spl_image_info *spl_image,
if (count == 0)
return -EIO;
+ /* skip further processing if requested to enable load-only use cases */
+ if (spl_load_simple_fit_skip_processing())
+ return 0;
+
/* find the node holding the images information */
images = fdt_path_offset(fit, FIT_IMAGES_PATH);
if (images < 0) {
diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c
index 324d91c884..b3619889f7 100644
--- a/common/spl/spl_mmc.c
+++ b/common/spl/spl_mmc.c
@@ -151,7 +151,8 @@ static int spl_mmc_find_device(struct mmc **mmcp, u32 boot_device)
#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
static int mmc_load_image_raw_partition(struct spl_image_info *spl_image,
- struct mmc *mmc, int partition)
+ struct mmc *mmc, int partition,
+ unsigned long sector)
{
disk_partition_t info;
int err;
@@ -180,8 +181,7 @@ static int mmc_load_image_raw_partition(struct spl_image_info *spl_image,
}
#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
- return mmc_load_image_raw_sector(spl_image, mmc,
- info.start + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR);
+ return mmc_load_image_raw_sector(spl_image, mmc, info.start + sector);
#else
return mmc_load_image_raw_sector(spl_image, mmc, info.start);
#endif
@@ -234,7 +234,8 @@ static int mmc_load_image_raw_os(struct spl_image_info *spl_image,
#endif
#ifdef CONFIG_SYS_MMCSD_FS_BOOT_PARTITION
-static int spl_mmc_do_fs_boot(struct spl_image_info *spl_image, struct mmc *mmc)
+static int spl_mmc_do_fs_boot(struct spl_image_info *spl_image, struct mmc *mmc,
+ const char *filename)
{
int err = -ENOSYS;
@@ -248,7 +249,7 @@ static int spl_mmc_do_fs_boot(struct spl_image_info *spl_image, struct mmc *mmc)
#ifdef CONFIG_SPL_FS_LOAD_PAYLOAD_NAME
err = spl_load_image_fat(spl_image, mmc_get_blk_desc(mmc),
CONFIG_SYS_MMCSD_FS_BOOT_PARTITION,
- CONFIG_SPL_FS_LOAD_PAYLOAD_NAME);
+ filename);
if (!err)
return err;
#endif
@@ -263,7 +264,7 @@ static int spl_mmc_do_fs_boot(struct spl_image_info *spl_image, struct mmc *mmc)
#ifdef CONFIG_SPL_FS_LOAD_PAYLOAD_NAME
err = spl_load_image_ext(spl_image, mmc_get_blk_desc(mmc),
CONFIG_SYS_MMCSD_FS_BOOT_PARTITION,
- CONFIG_SPL_FS_LOAD_PAYLOAD_NAME);
+ filename);
if (!err)
return err;
#endif
@@ -276,7 +277,8 @@ static int spl_mmc_do_fs_boot(struct spl_image_info *spl_image, struct mmc *mmc)
return err;
}
#else
-static int spl_mmc_do_fs_boot(struct spl_image_info *spl_image, struct mmc *mmc)
+static int spl_mmc_do_fs_boot(struct spl_image_info *spl_image, struct mmc *mmc,
+ const char *filename)
{
return -ENOSYS;
}
@@ -301,24 +303,31 @@ int spl_boot_partition(const u32 boot_device)
}
#endif
-int spl_mmc_load_image(struct spl_image_info *spl_image,
- struct spl_boot_device *bootdev)
+int spl_mmc_load(struct spl_image_info *spl_image,
+ struct spl_boot_device *bootdev,
+ const char *filename,
+ int raw_part,
+ unsigned long raw_sect)
{
- struct mmc *mmc = NULL;
+ static struct mmc *mmc;
u32 boot_mode;
int err = 0;
__maybe_unused int part;
- err = spl_mmc_find_device(&mmc, bootdev->boot_device);
- if (err)
- return err;
+ /* Perform peripheral init only once */
+ if (!mmc) {
+ err = spl_mmc_find_device(&mmc, bootdev->boot_device);
+ if (err)
+ return err;
- err = mmc_init(mmc);
- if (err) {
+ err = mmc_init(mmc);
+ if (err) {
+ mmc = NULL;
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
- printf("spl: mmc init failed with error: %d\n", err);
+ printf("spl: mmc init failed with error: %d\n", err);
#endif
- return err;
+ return err;
+ }
}
boot_mode = spl_boot_mode(bootdev->boot_device);
@@ -356,17 +365,13 @@ int spl_mmc_load_image(struct spl_image_info *spl_image,
return err;
}
#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
- err = spl_boot_partition(bootdev->boot_device);
- if (!err)
- return err;
-
- err = mmc_load_image_raw_partition(spl_image, mmc, err);
+ err = mmc_load_image_raw_partition(spl_image, mmc, raw_part,
+ raw_sect);
if (!err)
return err;
#endif
#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
- err = mmc_load_image_raw_sector(spl_image, mmc,
- CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR);
+ err = mmc_load_image_raw_sector(spl_image, mmc, raw_sect);
if (!err)
return err;
#endif
@@ -374,7 +379,7 @@ int spl_mmc_load_image(struct spl_image_info *spl_image,
case MMCSD_MODE_FS:
debug("spl: mmc boot mode: fs\n");
- err = spl_mmc_do_fs_boot(spl_image, mmc);
+ err = spl_mmc_do_fs_boot(spl_image, mmc, filename);
if (!err)
return err;
@@ -388,6 +393,27 @@ int spl_mmc_load_image(struct spl_image_info *spl_image,
return err;
}
+int spl_mmc_load_image(struct spl_image_info *spl_image,
+ struct spl_boot_device *bootdev)
+{
+ return spl_mmc_load(spl_image, bootdev,
+#ifdef CONFIG_SPL_FS_LOAD_PAYLOAD_NAME
+ CONFIG_SPL_FS_LOAD_PAYLOAD_NAME,
+#else
+ NULL,
+#endif
+#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION
+ spl_boot_partition(bootdev->boot_device),
+#else
+ 0,
+#endif
+#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
+ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR);
+#else
+ 0);
+#endif
+}
+
SPL_LOAD_IMAGE_METHOD("MMC1", 0, BOOT_DEVICE_MMC1, spl_mmc_load_image);
SPL_LOAD_IMAGE_METHOD("MMC2", 0, BOOT_DEVICE_MMC2, spl_mmc_load_image);
SPL_LOAD_IMAGE_METHOD("MMC2_2", 0, BOOT_DEVICE_MMC2_2, spl_mmc_load_image);
diff --git a/include/spl.h b/include/spl.h
index f09909e189..94ca5d5c6a 100644
--- a/include/spl.h
+++ b/include/spl.h
@@ -108,6 +108,15 @@ struct spl_load_info {
*/
binman_sym_extern(ulong, u_boot_any, image_pos);
+/**
+ * spl_load_simple_fit_skip_processing() - Hook to allow skipping the FIT
+ * image processing during spl_load_simple_fit().
+ *
+ * Return true to skip FIT processing, false to preserve the full code flow
+ * of spl_load_simple_fit().
+ */
+bool spl_load_simple_fit_skip_processing(void);
+
/**
* spl_load_simple_fit() - Loads a fit image from a device.
* @spl_image: Image description to set up
@@ -330,6 +339,23 @@ int spl_dfu_cmd(int usbctrl, char *dfu_alt_info, char *interface, char *devstr);
int spl_mmc_load_image(struct spl_image_info *spl_image,
struct spl_boot_device *bootdev);
+/**
+ * spl_mmc_load() - Load an image file from MMC/SD media
+ *
+ * @param spl_image Image data filled in by loading process
+ * @param bootdev Describes which device to load from
+ * @param filename Name of file to load (in FS mode)
+ * @param raw_part Partition to load from (in RAW mode)
+ * @param raw_sect Sector to load from (in RAW mode)
+ *
+ * @return 0 on success, otherwise error code
+ */
+int spl_mmc_load(struct spl_image_info *spl_image,
+ struct spl_boot_device *bootdev,
+ const char *filename,
+ int raw_part,
+ unsigned long raw_sect);
+
/**
* spl_invoke_atf - boot using an ARM trusted firmware image
*/
--
2.17.1
next prev parent reply other threads:[~2019-05-07 17:25 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-07 17:25 [U-Boot] [PATCH 00/13] System Firmware Loader for TI K3 family SoCs Andreas Dannenberg
2019-05-07 17:25 ` [U-Boot] [PATCH 01/13] mmc: k3_arasan: Allow driver to probe without PDs specified Andreas Dannenberg
2019-05-15 15:17 ` Tom Rini
2019-05-07 17:25 ` [U-Boot] [PATCH 02/13] spl: Allow skipping clearing BSS during relocation Andreas Dannenberg
2019-05-15 15:17 ` Tom Rini
2019-05-07 17:25 ` Andreas Dannenberg [this message]
2019-05-15 15:17 ` [U-Boot] [PATCH 03/13] spl: Make image loader infrastructure more universal Tom Rini
2019-05-07 17:25 ` [U-Boot] [PATCH 04/13] arm: K3: Introduce System Firmware loader framework Andreas Dannenberg
2019-05-07 18:16 ` Simon Goldschmidt
2019-05-07 19:17 ` Andreas Dannenberg
2019-05-07 19:21 ` Simon Goldschmidt
2019-05-15 15:17 ` Tom Rini
2019-05-15 21:39 ` Andreas Dannenberg
2019-05-15 21:50 ` Tom Rini
2019-05-16 15:47 ` Andreas Dannenberg
2019-05-16 19:14 ` Andreas Dannenberg
2019-05-17 11:20 ` Tom Rini
2019-05-07 17:25 ` [U-Boot] [PATCH 05/13] armV7R: K3: am654: Allow using SPL BSS pre-relocation Andreas Dannenberg
2019-05-07 17:25 ` [U-Boot] [PATCH 06/13] armv7R: K3: am654: Use full malloc implementation in SPL Andreas Dannenberg
2019-05-07 17:25 ` [U-Boot] [PATCH 07/13] armV7R: K3: am654: Load SYSFW binary and config from boot media Andreas Dannenberg
2019-05-07 17:25 ` [U-Boot] [PATCH 08/13] armv7R: dts: k3: am654: Update mmc nodes for loading sysfw Andreas Dannenberg
2019-05-07 17:25 ` [U-Boot] [PATCH 09/13] configs: am65x_evm_r5: All sysfw to be loaded via MMC Andreas Dannenberg
2019-05-07 17:25 ` [U-Boot] [PATCH 10/13] configs: am65x_hs_evm_r5: " Andreas Dannenberg
2019-05-18 16:08 ` Simon Glass
2019-05-07 17:25 ` [U-Boot] [PATCH 11/13] configs: am65x_evm: Add Support for eMMC boot Andreas Dannenberg
2019-05-07 17:25 ` [U-Boot] [PATCH 12/13] configs: am65x_hs_evm: " Andreas Dannenberg
2019-05-07 17:25 ` [U-Boot] [PATCH 13/13] am65x: README: Add eMMC layout and flash instructions Andreas Dannenberg
2019-05-07 20:00 ` [U-Boot] [PATCH 00/13] System Firmware Loader for TI K3 family SoCs Simon Goldschmidt
2019-05-08 4:31 ` Chee, Tien Fong
2019-05-08 18:43 ` dannenberg at ti.com
2019-05-13 13:37 ` Chee, Tien Fong
2019-05-15 21:24 ` dannenberg at ti.com
2019-05-08 18:04 ` Andreas Dannenberg
2019-05-08 18:57 ` Simon Goldschmidt
2019-05-15 15:16 ` Tom Rini
2019-05-15 20:31 ` Andreas Dannenberg
2019-05-16 20:32 ` Andreas Dannenberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190507172542.31359-4-dannenberg@ti.com \
--to=dannenberg@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox