From: Jagan Teki <jagan@amarulasolutions.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v7 02/11] Kconfig: Add default SPL_FIT_GENERATOR for rockchip
Date: Wed, 8 May 2019 00:06:18 +0530 [thread overview]
Message-ID: <20190507183625.5983-3-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20190507183625.5983-1-jagan@amarulasolutions.com>
Add default SPL_FIT_GENERATOR py script for rockchip platforms if
specific target enabled SPL_LOAD_FIT.
So, this would help get rid of explicitly mentioning the default
SPL FIT generator in defconfigs. however some targets, like puma_rk3399
still require their own FIT generator so in those cases the default will
override with defconfig defined generator.
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Kconfig | 1 +
configs/chromebook_bob_defconfig | 1 -
configs/evb-rk3399_defconfig | 1 -
configs/ficus-rk3399_defconfig | 1 -
configs/firefly-rk3399_defconfig | 1 -
configs/orangepi-rk3399_defconfig | 1 -
configs/rock960-rk3399_defconfig | 1 -
7 files changed, 1 insertion(+), 6 deletions(-)
diff --git a/Kconfig b/Kconfig
index 7a5491bd67..91c1082ace 100644
--- a/Kconfig
+++ b/Kconfig
@@ -435,6 +435,7 @@ config SPL_FIT_GENERATOR
string ".its file generator script for U-Boot FIT image"
depends on SPL_FIT
default "board/sunxi/mksunxi_fit_atf.sh" if SPL_LOAD_FIT && ARCH_SUNXI
+ default "arch/arm/mach-rockchip/make_fit_atf.py" if SPL_LOAD_FIT && ARCH_ROCKCHIP
help
Specifies a (platform specific) script file to generate the FIT
source file used to build the U-Boot FIT image file. This gets
diff --git a/configs/chromebook_bob_defconfig b/configs/chromebook_bob_defconfig
index ce07a7f0ff..bd836acad5 100644
--- a/configs/chromebook_bob_defconfig
+++ b/configs/chromebook_bob_defconfig
@@ -19,7 +19,6 @@ CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-gru-bob.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/evb-rk3399_defconfig b/configs/evb-rk3399_defconfig
index 5bb910e8d4..94963e4280 100644
--- a/configs/evb-rk3399_defconfig
+++ b/configs/evb-rk3399_defconfig
@@ -13,7 +13,6 @@ CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-evb.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/ficus-rk3399_defconfig b/configs/ficus-rk3399_defconfig
index 79da86b32f..926d244fbe 100644
--- a/configs/ficus-rk3399_defconfig
+++ b/configs/ficus-rk3399_defconfig
@@ -13,7 +13,6 @@ CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_TEXT_BASE=0xff8c2000
diff --git a/configs/firefly-rk3399_defconfig b/configs/firefly-rk3399_defconfig
index 301b27e3a4..5016fb8993 100644
--- a/configs/firefly-rk3399_defconfig
+++ b/configs/firefly-rk3399_defconfig
@@ -13,7 +13,6 @@ CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-firefly.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/orangepi-rk3399_defconfig b/configs/orangepi-rk3399_defconfig
index ba13976cc6..22ddd8dce3 100644
--- a/configs/orangepi-rk3399_defconfig
+++ b/configs/orangepi-rk3399_defconfig
@@ -13,7 +13,6 @@ CONFIG_DEBUG_UART=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-orangepi.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig
index 8d490be18c..48d14ef7d8 100644
--- a/configs/rock960-rk3399_defconfig
+++ b/configs/rock960-rk3399_defconfig
@@ -13,7 +13,6 @@ CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock960.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
--
2.18.0.321.gffc6fa0e3
next prev parent reply other threads:[~2019-05-07 18:36 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-07 18:36 [U-Boot] [PATCH v7 00/11] rockchip: Add new rk3399 boards Jagan Teki
2019-05-07 18:36 ` [U-Boot] [PATCH v7 01/11] rockchip: dts: rk3399: Sync pwm2_pin_pull_down from Linux 5.1-rc2 Jagan Teki
2019-05-08 3:46 ` Kever Yang
2019-05-07 18:36 ` Jagan Teki [this message]
2019-05-08 3:46 ` [U-Boot] [PATCH v7 02/11] Kconfig: Add default SPL_FIT_GENERATOR for rockchip Kever Yang
2019-05-07 18:36 ` [U-Boot] [PATCH v7 03/11] arm: rockchip: rk3399: Move common configs in Kconfig Jagan Teki
2019-05-08 3:47 ` Kever Yang
2019-05-07 18:36 ` [U-Boot] [PATCH v7 04/11] rockchip: dts: rk3399: Sync rk3399-nanopi4.dtsi from Linux Jagan Teki
2019-05-08 3:47 ` Kever Yang
2019-05-07 18:36 ` [U-Boot] [PATCH v7 05/11] rockchip: dts: rk3399: nanopi4: Use CD pin as RK_FUNC_1 Jagan Teki
2019-05-08 3:47 ` Kever Yang
2019-05-07 18:36 ` [U-Boot] [PATCH v7 06/11] rockchip: rk3399: Add Nanopi M4 board support Jagan Teki
2019-05-07 18:36 ` [U-Boot] [PATCH v7 07/11] rockchip: rk3399: Add Nanopc T4 " Jagan Teki
2019-05-08 3:48 ` Kever Yang
2019-05-07 18:36 ` [U-Boot] [PATCH v7 08/11] rockchip: rk3399: Add Nanopi NEO4 " Jagan Teki
2019-05-08 3:48 ` Kever Yang
2019-05-07 18:36 ` [U-Boot] [PATCH v7 09/11] rockchip: rk3399: Add Rockpro64 " Jagan Teki
2019-05-08 3:48 ` Kever Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190507183625.5983-3-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox