public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Lukasz Majewski <lukma@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [i.MX8MM+CCF 04/41] clk: use clk_dev_binded
Date: Wed, 8 May 2019 09:27:37 +0200	[thread overview]
Message-ID: <20190508092737.6b5efd39@jawa> (raw)
In-Reply-To: <20190430103056.32537-5-peng.fan@nxp.com>

On Tue, 30 Apr 2019 10:17:43 +0000
Peng Fan <peng.fan@nxp.com> wrote:

> Preparing to support composite clk.
> 
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>  drivers/clk/clk-divider.c | 4 ++--
>  drivers/clk/clk-mux.c     | 6 ++++--
>  2 files changed, 6 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
> index 1d2c1b1ec4..2f09e0bb58 100644
> --- a/drivers/clk/clk-divider.c
> +++ b/drivers/clk/clk-divider.c
> @@ -69,8 +69,8 @@ unsigned long divider_recalc_rate(struct clk *hw,
> unsigned long parent_rate, 
>  static ulong clk_divider_recalc_rate(struct clk *clk)
>  {
> -	struct clk_divider *divider =
> -		to_clk_divider((struct clk
> *)dev_get_driver_data(clk->dev));
> +	struct clk_divider *divider =
> to_clk_divider(clk_dev_binded(clk) ?
> +			(struct clk
> *)dev_get_driver_data(clk->dev) : clk); unsigned long parent_rate =
> clk_get_parent_rate(clk); unsigned int val;
>  
> diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c
> index 2c85f2052c..55fc97367a 100644
> --- a/drivers/clk/clk-mux.c
> +++ b/drivers/clk/clk-mux.c
> @@ -35,7 +35,8 @@
>  int clk_mux_val_to_index(struct clk *clk, u32 *table, unsigned int
> flags, unsigned int val)
>  {
> -	struct clk_mux *mux = to_clk_mux(clk);
> +	struct clk_mux *mux = to_clk_mux(clk_dev_binded(clk) ?
> +			(struct clk
> *)dev_get_driver_data(clk->dev) : clk); int num_parents =
> mux->num_parents; 
>  	if (table) {
> @@ -61,7 +62,8 @@ int clk_mux_val_to_index(struct clk *clk, u32
> *table, unsigned int flags, 
>  static u8 clk_mux_get_parent(struct clk *clk)
>  {
> -	struct clk_mux *mux = to_clk_mux(clk);
> +	struct clk_mux *mux = to_clk_mux(clk_dev_binded(clk) ?
> +			(struct clk
> *)dev_get_driver_data(clk->dev) : clk); u32 val;

Maybe the 

(clk_dev_binded(clk) ? (struct clk *)dev_get_driver_data(clk->dev) :
clk)

Could be an inline function or macro?

>  
>  	val = readl(mux->reg) >> mux->shift;




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190508/222344e2/attachment.sig>

  parent reply	other threads:[~2019-05-08  7:27 UTC|newest]

Thread overview: 84+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-30 10:17 [U-Boot] [i.MX8MM+CCF 00/41] i.MX8MM + CCF Peng Fan
2019-04-30 10:17 ` [U-Boot] [i.MX8MM+CCF 01/41] clk: correct get clk_x pointer Peng Fan
2019-05-06 21:36   ` Lukasz Majewski
2019-04-30 10:17 ` [U-Boot] [i.MX8MM+CCF 02/41] clk: fixed-factor: fix get clk_fixed_factor Peng Fan
2019-05-06 21:41   ` Lukasz Majewski
2019-04-30 10:17 ` [U-Boot] [i.MX8MM+CCF 03/41] clk: introduce clk_dev_binded Peng Fan
2019-05-06 21:57   ` Lukasz Majewski
2019-05-07 13:22     ` Peng Fan
2019-05-08  7:30       ` Lukasz Majewski
2019-05-08  7:41         ` Peng Fan
2019-05-08 22:24           ` Lukasz Majewski
2019-04-30 10:17 ` [U-Boot] [i.MX8MM+CCF 04/41] clk: use clk_dev_binded Peng Fan
2019-05-06 21:59   ` Lukasz Majewski
2019-05-08  7:27   ` Lukasz Majewski [this message]
2019-04-30 10:17 ` [U-Boot] [i.MX8MM+CCF 05/41] clk-provider: sync more clk flags from Linux Kernel Peng Fan
2019-05-06 22:01   ` Lukasz Majewski
2019-04-30 10:17 ` [U-Boot] [i.MX8MM+CCF 06/41] cmd: clk: print err value when clk_get_rate failed Peng Fan
2019-05-06 22:03   ` Lukasz Majewski
2019-04-30 10:17 ` [U-Boot] [i.MX8MM+CCF 07/41] clk: mux: add set parent support Peng Fan
2019-05-06 22:04   ` Lukasz Majewski
2019-05-07 13:23     ` Peng Fan
2019-04-30 10:17 ` [U-Boot] [i.MX8MM+CCF 08/41] clk: export mux/divider ops Peng Fan
2019-05-06 22:06   ` Lukasz Majewski
2019-05-07 13:25     ` Peng Fan
2019-05-08  6:31       ` Lukasz Majewski
2019-05-08  6:35         ` Peng Fan
2019-04-30 10:18 ` [U-Boot] [i.MX8MM+CCF 09/41] clk: add clk-gate support Peng Fan
2019-04-30 10:18 ` [U-Boot] [i.MX8MM+CCF 10/41] divider set rate supporrt Peng Fan
2019-05-06 22:08   ` Lukasz Majewski
2019-04-30 10:18 ` [U-Boot] [i.MX8MM+CCF 11/41] clk: fixed_rate: export clk_fixed_rate Peng Fan
2019-05-06 22:15   ` Lukasz Majewski
2019-05-07 13:27     ` Peng Fan
2019-05-08  6:46       ` Lukasz Majewski
2019-05-08  6:51         ` Peng Fan
2019-05-08  7:40           ` Lukasz Majewski
2019-05-08  7:45             ` Peng Fan
2019-05-08 22:27               ` Lukasz Majewski
2019-05-09  1:13                 ` Peng Fan
2019-05-16  8:55                   ` Lukasz Majewski
2019-05-16  9:58                     ` Peng Fan
2019-05-16 10:08                       ` Lukasz Majewski
2019-04-30 10:18 ` [U-Boot] [i.MX8MM+CCF 12/41] clk: fixed_rate: add pre reloc flag Peng Fan
2019-05-06 22:16   ` Lukasz Majewski
2019-05-07 13:29     ` Peng Fan
2019-05-07 14:00       ` Bin Meng
2019-05-08  7:00         ` Lukasz Majewski
2019-05-08  6:57       ` Lukasz Majewski
2019-05-08  7:21         ` Peng Fan
2019-04-30 10:18 ` [U-Boot] [i.MX8MM+CCF 13/41] clk: imx: import clk heplers Peng Fan
2019-05-06 22:17   ` Lukasz Majewski
2019-04-30 10:18 ` [U-Boot] [i.MX8MM+CCF 14/41] clk: imx: gate2 add set rate Peng Fan
2019-04-30 10:18 ` [U-Boot] [i.MX8MM+CCF 15/41] linux: compat: guard PAGE_SIZE Peng Fan
2019-04-30 10:18 ` [U-Boot] [i.MX8MM+CCF 16/41] drivers: core: use strcmp when find device by name Peng Fan
2019-04-30 10:18 ` [U-Boot] [i.MX8MM+CCF 17/41] ddr: imx8m: fix ddr firmware location when enable SPL OF Peng Fan
2019-04-30 10:18 ` [U-Boot] [i.MX8MM+CCF 18/41] imx: add IMX8MQ kconfig entry Peng Fan
2019-04-30 10:18 ` [U-Boot] [i.MX8MM+CCF 19/41] imx: add IMX8MM " Peng Fan
2019-04-30 10:18 ` [U-Boot] [i.MX8MM+CCF 20/41] imx: imx8mm: add clock bindings header Peng Fan
2019-04-30 10:18 ` [U-Boot] [i.MX8MM+CCF 21/41] imx: add i.MX8MM cpu type Peng Fan
2019-04-30 10:18 ` [U-Boot] [i.MX8MM+CCF 22/41] imx: spl: add spl_board_boot_device for i.MX8MM Peng Fan
2019-04-30 10:18 ` [U-Boot] [i.MX8MM+CCF 23/41] imx8m: update imx-regs " Peng Fan
2019-04-30 10:18 ` [U-Boot] [i.MX8MM+CCF 24/41] imx: add get_cpu_rev support " Peng Fan
2019-04-30 10:18 ` [U-Boot] [i.MX8MM+CCF 25/41] imx8m: rename clock to clock_imx8mq Peng Fan
2019-04-30 10:19 ` [U-Boot] [i.MX8MM+CCF 26/41] imx8m: restructure clock.h Peng Fan
2019-04-30 10:19 ` [U-Boot] [i.MX8MM+CCF 27/41] imx8m: add clk support for i.MX8MM Peng Fan
2019-04-30 10:19 ` [U-Boot] [i.MX8MM+CCF 28/41] imx8m: soc: probe clk before relocation Peng Fan
2019-04-30 10:19 ` [U-Boot] [i.MX8MM+CCF 29/41] imx8m: add pin header for i.MX8MM Peng Fan
2019-04-30 10:19 ` [U-Boot] [i.MX8MM+CCF 30/41] imx: add i.MX8MM PE property Peng Fan
2019-04-30 10:19 ` [U-Boot] [i.MX8MM+CCF 31/41] imx8m: Fix MMU table issue for OPTEE memory Peng Fan
2019-04-30 10:19 ` [U-Boot] [i.MX8MM+CCF 32/41] imx8m: set BYPASS ID SWAP to avoid AXI bus errors Peng Fan
2019-04-30 10:19 ` [U-Boot] [i.MX8MM+CCF 33/41] imx8m: Configure trustzone region 0 for non-secure access Peng Fan
2019-04-30 10:19 ` [U-Boot] [i.MX8MM+CCF 34/41] imx8m: soc: enable SCTR clock before timer init Peng Fan
2019-04-30 10:19 ` [U-Boot] [i.MX8MM+CCF 35/41] serial: Kconfig: make MXC_UART usable for MX7 and IMX8M Peng Fan
2019-04-30 10:19 ` [U-Boot] [i.MX8MM+CCF 36/41] clk: imx: add Kconfig entry for i.MX8MM Peng Fan
2019-04-30 10:19 ` [U-Boot] [i.MX8MM+CCF 37/41] clk: imx: add pll14xx driver Peng Fan
2019-04-30 10:19 ` [U-Boot] [i.MX8MM+CCF 38/41] clk: add composite clk support Peng Fan
2019-04-30 10:19 ` [U-Boot] [i.MX8MM+CCF 39/41] clk: imx: add i.MX8MM " Peng Fan
2019-04-30 10:19 ` [U-Boot] [i.MX8MM+CCF 40/41] clk: imx: add i.MX8MM clk driver Peng Fan
2019-04-30 10:19 ` [U-Boot] [i.MX8MM+CCF 41/41] imx: add i.MX8MM EVK board support Peng Fan
2019-05-06  7:57 ` [U-Boot] [i.MX8MM+CCF 00/41] i.MX8MM + CCF Schrempf Frieder
2019-05-06  8:26   ` Schrempf Frieder
2019-05-06  9:08     ` Peng Fan
2019-05-06  9:55       ` Lukasz Majewski
2019-05-06 21:32 ` Lukasz Majewski
2019-05-07 13:16   ` Peng Fan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190508092737.6b5efd39@jawa \
    --to=lukma@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox