public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Andreas Dannenberg <dannenberg@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 10/18] configs: am65x_hs_evm_a53: Enable PCA953X-type GPIO driver
Date: Wed, 8 May 2019 16:37:43 -0500	[thread overview]
Message-ID: <20190508213751.23179-11-dannenberg@ti.com> (raw)
In-Reply-To: <20190508213751.23179-1-dannenberg@ti.com>

Enable GPIO driver for PCA953X-compatible I2C-based I/O expander
which includes support for the TCA9554/PCA9554-type expander found
on the AM654 EVM base board.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
---
 configs/am65x_hs_evm_a53_defconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/configs/am65x_hs_evm_a53_defconfig b/configs/am65x_hs_evm_a53_defconfig
index cebfbb93d9..8376a6be3d 100644
--- a/configs/am65x_hs_evm_a53_defconfig
+++ b/configs/am65x_hs_evm_a53_defconfig
@@ -57,6 +57,8 @@ CONFIG_CLK_TI_SCI=y
 CONFIG_DMA_CHANNELS=y
 CONFIG_TI_K3_NAVSS_UDMA=y
 CONFIG_TI_SCI_PROTOCOL=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_PCA953X=y
 CONFIG_DM_I2C=y
 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
 CONFIG_SYS_I2C_OMAP24XX=y
-- 
2.17.1

  parent reply	other threads:[~2019-05-08 21:37 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-08 21:37 [U-Boot] [PATCH 00/18] Add EEPROM-based board detect support for TI Andreas Dannenberg
2019-05-08 21:37 ` [U-Boot] [PATCH 01/18] i2c: omap24xx_i2c: Adapt driver to support K3 devices Andreas Dannenberg
2019-05-09 11:19   ` Heiko Schocher
2019-05-08 21:37 ` [U-Boot] [PATCH 02/18] arm: omap_i2c: Remove unwanted header file inclusion Andreas Dannenberg
2019-05-09 11:20   ` Heiko Schocher
2019-05-08 21:37 ` [U-Boot] [PATCH 03/18] arm: dts: k3-am65: Move pinctrl nodes out of U-Boot specific dtsi Andreas Dannenberg
2019-05-08 21:37 ` [U-Boot] [PATCH 04/18] arm: dts: k3-am65: Add I2C nodes Andreas Dannenberg
2019-05-08 21:37 ` [U-Boot] [PATCH 05/18] arm: dts: k3-am654-base-board: Enable wkup_i2c0 across all boot stages Andreas Dannenberg
2019-05-08 21:37 ` [U-Boot] [PATCH 06/18] configs: am65x_evm_defconfig: Enable I2C support Andreas Dannenberg
2019-05-08 21:37 ` [U-Boot] [PATCH 07/18] configs: am65x_hs_evm_defconfig: " Andreas Dannenberg
2019-05-08 21:53   ` Andrew F. Davis
2019-05-08 21:37 ` [U-Boot] [PATCH 08/18] arm64: dts: k3-am654-base-board: Add I2C GPIO expander @ 0x38 Andreas Dannenberg
2019-05-08 21:37 ` [U-Boot] [PATCH 09/18] configs: am65x_evm_a53: Enable PCA953X-type GPIO driver Andreas Dannenberg
2019-05-08 21:37 ` Andreas Dannenberg [this message]
2019-05-08 21:37 ` [U-Boot] [PATCH 11/18] configs: am65x_evm_a53: Increase malloc pool before relocation Andreas Dannenberg
2019-05-08 21:37 ` [U-Boot] [PATCH 12/18] configs: am65x_hs_evm_a53: " Andreas Dannenberg
2019-05-08 21:37 ` [U-Boot] [PATCH 13/18] arm: K3: am654: Map common EEPROM data into SRAM scratch space Andreas Dannenberg
2019-05-09  3:52   ` Lokesh Vutla
2019-05-09 16:03     ` Andrew F. Davis
2019-05-09 16:27       ` Andreas Dannenberg
2019-05-15 20:11         ` Andreas Dannenberg
2019-05-08 21:37 ` [U-Boot] [PATCH 14/18] ti: common: am6: Add support for board description EEPROM Andreas Dannenberg
2019-05-08 21:37 ` [U-Boot] [PATCH 15/18] ti: common: am6: Add support for setting MAC addresses Andreas Dannenberg
2019-05-08 21:37 ` [U-Boot] [PATCH 16/18] board: ti: am654: Use EEPROM-based board detection Andreas Dannenberg
2019-05-08 21:37 ` [U-Boot] [PATCH 17/18] configs: am65x_evm: Add support for applying overlays Andreas Dannenberg
2019-05-08 21:37 ` [U-Boot] [PATCH 18/18] configs: am65x_hs_evm: " Andreas Dannenberg
2019-05-16 20:25 ` [U-Boot] [PATCH 00/18] Add EEPROM-based board detect support for TI Lokesh Vutla

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190508213751.23179-11-dannenberg@ti.com \
    --to=dannenberg@ti.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox