From: Andreas Dannenberg <dannenberg@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 08/18] arm64: dts: k3-am654-base-board: Add I2C GPIO expander @ 0x38
Date: Wed, 8 May 2019 16:37:41 -0500 [thread overview]
Message-ID: <20190508213751.23179-9-dannenberg@ti.com> (raw)
In-Reply-To: <20190508213751.23179-1-dannenberg@ti.com>
The AM654 base board has a TCA9554/PCA9554-type GPIO expander on the
wkup_i2c0 bus at address 0x38 that is used to detect the presence of
daughter cards. Add a respective DTS description of this expander
to enable its use.
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
---
arch/arm/dts/k3-am654-base-board.dts | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/dts/k3-am654-base-board.dts b/arch/arm/dts/k3-am654-base-board.dts
index e31411e39d..c6a595be23 100644
--- a/arch/arm/dts/k3-am654-base-board.dts
+++ b/arch/arm/dts/k3-am654-base-board.dts
@@ -48,4 +48,11 @@
pinctrl-names = "default";
pinctrl-0 = <&wkup_i2c0_pins_default>;
clock-frequency = <400000>;
+
+ tca9554: gpio at 38 {
+ compatible = "nxp,pca9554";
+ reg = <0x38>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
--
2.17.1
next prev parent reply other threads:[~2019-05-08 21:37 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-08 21:37 [U-Boot] [PATCH 00/18] Add EEPROM-based board detect support for TI Andreas Dannenberg
2019-05-08 21:37 ` [U-Boot] [PATCH 01/18] i2c: omap24xx_i2c: Adapt driver to support K3 devices Andreas Dannenberg
2019-05-09 11:19 ` Heiko Schocher
2019-05-08 21:37 ` [U-Boot] [PATCH 02/18] arm: omap_i2c: Remove unwanted header file inclusion Andreas Dannenberg
2019-05-09 11:20 ` Heiko Schocher
2019-05-08 21:37 ` [U-Boot] [PATCH 03/18] arm: dts: k3-am65: Move pinctrl nodes out of U-Boot specific dtsi Andreas Dannenberg
2019-05-08 21:37 ` [U-Boot] [PATCH 04/18] arm: dts: k3-am65: Add I2C nodes Andreas Dannenberg
2019-05-08 21:37 ` [U-Boot] [PATCH 05/18] arm: dts: k3-am654-base-board: Enable wkup_i2c0 across all boot stages Andreas Dannenberg
2019-05-08 21:37 ` [U-Boot] [PATCH 06/18] configs: am65x_evm_defconfig: Enable I2C support Andreas Dannenberg
2019-05-08 21:37 ` [U-Boot] [PATCH 07/18] configs: am65x_hs_evm_defconfig: " Andreas Dannenberg
2019-05-08 21:53 ` Andrew F. Davis
2019-05-08 21:37 ` Andreas Dannenberg [this message]
2019-05-08 21:37 ` [U-Boot] [PATCH 09/18] configs: am65x_evm_a53: Enable PCA953X-type GPIO driver Andreas Dannenberg
2019-05-08 21:37 ` [U-Boot] [PATCH 10/18] configs: am65x_hs_evm_a53: " Andreas Dannenberg
2019-05-08 21:37 ` [U-Boot] [PATCH 11/18] configs: am65x_evm_a53: Increase malloc pool before relocation Andreas Dannenberg
2019-05-08 21:37 ` [U-Boot] [PATCH 12/18] configs: am65x_hs_evm_a53: " Andreas Dannenberg
2019-05-08 21:37 ` [U-Boot] [PATCH 13/18] arm: K3: am654: Map common EEPROM data into SRAM scratch space Andreas Dannenberg
2019-05-09 3:52 ` Lokesh Vutla
2019-05-09 16:03 ` Andrew F. Davis
2019-05-09 16:27 ` Andreas Dannenberg
2019-05-15 20:11 ` Andreas Dannenberg
2019-05-08 21:37 ` [U-Boot] [PATCH 14/18] ti: common: am6: Add support for board description EEPROM Andreas Dannenberg
2019-05-08 21:37 ` [U-Boot] [PATCH 15/18] ti: common: am6: Add support for setting MAC addresses Andreas Dannenberg
2019-05-08 21:37 ` [U-Boot] [PATCH 16/18] board: ti: am654: Use EEPROM-based board detection Andreas Dannenberg
2019-05-08 21:37 ` [U-Boot] [PATCH 17/18] configs: am65x_evm: Add support for applying overlays Andreas Dannenberg
2019-05-08 21:37 ` [U-Boot] [PATCH 18/18] configs: am65x_hs_evm: " Andreas Dannenberg
2019-05-16 20:25 ` [U-Boot] [PATCH 00/18] Add EEPROM-based board detect support for TI Lokesh Vutla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190508213751.23179-9-dannenberg@ti.com \
--to=dannenberg@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox