From mboxrd@z Thu Jan 1 00:00:00 1970 From: Krzysztof Kozlowski Date: Sat, 11 May 2019 13:24:33 +0200 Subject: [U-Boot] [PATCH v2 3/3] configs: arndale: Use appropriate driver for Asix AX88760 In-Reply-To: <20190511112433.31367-1-krzk@kernel.org> References: <20190511112433.31367-1-krzk@kernel.org> Message-ID: <20190511112433.31367-3-krzk@kernel.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Arndale board has an Asix AX88760 USB 2.0 Hub and Fast Ethernet combo. The appropriate driver for it is USB_ETHER_ASIX. The mistake probably came from misinterpretation of commit e9954b867ce0 ("usb: eth: add ASIX AX88179 DRIVER") which was tested on RECS5250 COM module. This module indeed has Exynos5250 and some similarities with Arndale 5250 board but the USB/Ethernet chip used there is apparently different. Fixes: f58ad98a621c ("usb: net: migrate USB Ethernet adapters to Kconfig") Signed-off-by: Krzysztof Kozlowski Reviewed-by: Lukasz Majewski --- Not tested. Changes since v1: 1. Add Lukasz's tag. --- configs/arndale_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configs/arndale_defconfig b/configs/arndale_defconfig index e90d670f6813..37ad6accc396 100644 --- a/configs/arndale_defconfig +++ b/configs/arndale_defconfig @@ -42,4 +42,4 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_HOST_ETHER=y -CONFIG_USB_ETHER_ASIX88179=y +CONFIG_USB_ETHER_ASIX=y -- 2.17.1