[U-Boot] [PATCH 04/13] arm: K3: Introduce System Firmware loader framework

[Tom Rini <trini@konsulko.com>]

On Tue, May 07, 2019 at 12:25:33PM -0500, Andreas Dannenberg wrote:

> Introduce a framework that allows loading the System Firmware (SYSFW)
> binary as well as the associated configuration data from an image tree
> blob named "sysfw.itb" from an FS-based MMC boot media or from an MMC
> RAW mode partition or sector.
> 
> To simplify the handling of and loading from the different boot media
> we tap into the existing U-Boot SPL framework usually used for loading
> U-Boot by building on an earlier commit that exposes some of that
> functionality.
> 
> Note that this initial implementation only supports FS and RAW-based
> eMMC/SD card boot.
[snip]
> diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig
> index e677a2e01b..f1731dda58 100644
> --- a/arch/arm/mach-k3/Kconfig
> +++ b/arch/arm/mach-k3/Kconfig
> @@ -58,6 +58,46 @@ config SYS_K3_BOOT_CORE_ID
>  	int
>  	default 16
>  
> +config K3_LOAD_SYSFW
> +	bool
> +	depends on SPL
> +	default n

'n' is already default, you can drop this.

[snip]
> +config K3_SYSFW_IMAGE_SIZE_MAX
> +	int "Amount of memory dynamically allocated for loading SYSFW blob"
> +	depends on K3_LOAD_SYSFW
> +	default	269000
> +	help
> +	  Amount of memory reserved through dynamic allocation at runtime for
> +	  loading the combined System Firmware and configuration image tree
> +	  blob. Keep it as tight as possible, as this directly affects the
> +	  overall SPL memory footprint.

This is missing a unit, and is 'int' really the best choice here (and
really, I guess, 262.6KiB as a default) ?

[snip]
> diff --git a/arch/arm/mach-k3/Makefile b/arch/arm/mach-k3/Makefile
> index 0c3a4f7db1..6c895400c2 100644
> --- a/arch/arm/mach-k3/Makefile
> +++ b/arch/arm/mach-k3/Makefile
> @@ -7,4 +7,5 @@ obj-$(CONFIG_SOC_K3_AM6) += am6_init.o
>  obj-$(CONFIG_ARM64) += arm64-mmu.o
>  obj-$(CONFIG_CPU_V7R) += r5_mpu.o lowlevel_init.o
>  obj-$(CONFIG_TI_SECURE_DEVICE) += security.o
> +obj-$(CONFIG_K3_LOAD_SYSFW) += sysfw-loader.o
>  obj-y += common.o
[snip]
> diff --git a/arch/arm/mach-k3/sysfw-loader.c b/arch/arm/mach-k3/sysfw-loader.c
> new file mode 100644
> index 0000000000..a222266c27
> --- /dev/null
> +++ b/arch/arm/mach-k3/sysfw-loader.c
> @@ -0,0 +1,263 @@
[snip]
> +#ifdef CONFIG_SPL_BUILD
[snip of the whole body of the file]
> +#endif

We should be using something else in the Makefile, typically:
obj-$(CONFIG_SPL_BUILD) += sysfw-loader.o
should work.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190515/c5938637/attachment.sig>