From: Bartosz Golaszewski <brgl@bgdev.pl>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/4] davinci: remove CONFIG_DM_I2C_COMPAT from defconfigs
Date: Mon, 27 May 2019 10:57:18 +0200 [thread overview]
Message-ID: <20190527085721.6722-2-brgl@bgdev.pl> (raw)
In-Reply-To: <20190527085721.6722-1-brgl@bgdev.pl>
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
This option is no longer used on any davinci board but still selected
in defconfigs which causes the following warning:
===================== WARNING ======================
This board uses CONFIG_DM_I2C_COMPAT. Please remove
(possibly in a subsequent patch in your series)
before sending patches to the mailing list.
====================================================
Remove all references to CONFIG_DM_I2C_COMPAT from davinci.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
configs/da850_am18xxevm_defconfig | 1 -
configs/omapl138_lcdk_defconfig | 1 -
include/configs/am3517_evm.h | 1 -
include/configs/da850evm.h | 8 --------
include/configs/omapl138_lcdk.h | 8 --------
5 files changed, 19 deletions(-)
diff --git a/configs/da850_am18xxevm_defconfig b/configs/da850_am18xxevm_defconfig
index f098222113..ad01957fa1 100644
--- a/configs/da850_am18xxevm_defconfig
+++ b/configs/da850_am18xxevm_defconfig
@@ -44,7 +44,6 @@ CONFIG_DM=y
CONFIG_SPL_DM=y
CONFIG_DA8XX_GPIO=y
CONFIG_DM_I2C=y
-CONFIG_DM_I2C_COMPAT=y
CONFIG_SYS_I2C_DAVINCI=y
CONFIG_MTD_DEVICE=y
CONFIG_DM_SPI_FLASH=y
diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig
index e43141844a..b03d8160af 100644
--- a/configs/omapl138_lcdk_defconfig
+++ b/configs/omapl138_lcdk_defconfig
@@ -37,7 +37,6 @@ CONFIG_ENV_IS_IN_NAND=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM=y
CONFIG_DM_I2C=y
-CONFIG_DM_I2C_COMPAT=y
CONFIG_SYS_I2C_DAVINCI=y
CONFIG_DM_MMC=y
CONFIG_NAND=y
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 9475e9975d..11f8f6d213 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -14,7 +14,6 @@
#include <configs/ti_omap3_common.h>
-#undef CONFIG_DM_I2C_COMPAT
#define CONFIG_REVISION_TAG
/* Hardware drivers */
diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index ccdac0abec..5d02c35279 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -18,14 +18,6 @@
#define CONFIG_USE_SPIFLASH
#endif
-/*
-* Disable DM_* for SPL build and can be re-enabled after adding
-* DM support in SPL
-*/
-#ifdef CONFIG_SPL_BUILD
-#undef CONFIG_DM_I2C
-#undef CONFIG_DM_I2C_COMPAT
-#endif
/*
* SoC Configuration
*/
diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h
index da615e5063..db4a663c53 100644
--- a/include/configs/omapl138_lcdk.h
+++ b/include/configs/omapl138_lcdk.h
@@ -16,14 +16,6 @@
#undef CONFIG_USE_SPIFLASH
#undef CONFIG_SYS_USE_NOR
-/*
-* Disable DM_* for SPL build and can be re-enabled after adding
-* DM support in SPL
-*/
-#ifdef CONFIG_SPL_BUILD
-#undef CONFIG_DM_I2C
-#undef CONFIG_DM_I2C_COMPAT
-#endif
/*
* SoC Configuration
*/
--
2.21.0
next prev parent reply other threads:[~2019-05-27 8:57 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-27 8:57 [U-Boot] [PATCH 0/4] davinci: fix build warnings Bartosz Golaszewski
2019-05-27 8:57 ` Bartosz Golaszewski [this message]
2019-05-27 9:43 ` [U-Boot] [PATCH 1/4] davinci: remove CONFIG_DM_I2C_COMPAT from defconfigs Heiko Schocher
2019-05-27 8:57 ` [U-Boot] [PATCH 2/4] sandbox: " Bartosz Golaszewski
2019-05-27 9:44 ` Heiko Schocher
2019-05-27 8:57 ` [U-Boot] [PATCH 3/4] i2c: remove i2c driver-model compatibility layer Bartosz Golaszewski
2019-05-27 9:45 ` Heiko Schocher
2019-05-27 8:57 ` [U-Boot] [PATCH 4/4] omapl138_lcdk_defconfig: don't build support for SPI Bartosz Golaszewski
2019-05-27 9:46 ` Heiko Schocher
2019-06-24 8:18 ` [U-Boot] [PATCH 0/4] davinci: fix build warnings Bartosz Golaszewski
2019-07-04 7:38 ` Bartosz Golaszewski
2019-07-04 13:28 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190527085721.6722-2-brgl@bgdev.pl \
--to=brgl@bgdev.pl \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox