From: Bartosz Golaszewski <brgl@bgdev.pl>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 4/4] davinci: omapl138-lcdk: enable driver-model in SPL
Date: Tue, 28 May 2019 11:58:25 +0200 [thread overview]
Message-ID: <20190528095825.24835-5-brgl@bgdev.pl> (raw)
In-Reply-To: <20190528095825.24835-1-brgl@bgdev.pl>
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Enable CONFIG_SPL_DM and enable the driver model for serial by defining
an appropriate device in the board file for da850-lcdk.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
board/davinci/da8xxevm/omapl138_lcdk.c | 16 ++++++++++++++++
configs/omapl138_lcdk_defconfig | 5 +++++
2 files changed, 21 insertions(+)
diff --git a/board/davinci/da8xxevm/omapl138_lcdk.c b/board/davinci/da8xxevm/omapl138_lcdk.c
index 156d61d9fb..b20747ba01 100644
--- a/board/davinci/da8xxevm/omapl138_lcdk.c
+++ b/board/davinci/da8xxevm/omapl138_lcdk.c
@@ -15,6 +15,8 @@
#include <asm/arch/hardware.h>
#include <asm/ti-common/davinci_nand.h>
#include <asm/io.h>
+#include <ns16550.h>
+#include <dm/platdata.h>
#include <linux/errno.h>
#include <asm/mach-types.h>
#include <asm/arch/davinci_misc.h>
@@ -369,3 +371,17 @@ int board_mmc_init(bd_t *bis)
}
#endif
#endif
+
+#ifdef CONFIG_SPL_BUILD
+static const struct ns16550_platdata serial_pdata = {
+ .base = DAVINCI_UART2_BASE,
+ .reg_shift = 2,
+ .clock = 228000000,
+ .fcr = UART_FCR_DEFVAL,
+};
+
+U_BOOT_DEVICE(omapl138_uart) = {
+ .name = "ns16550_serial",
+ .platdata = &serial_pdata,
+};
+#endif
diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig
index b375da50df..f53a51321c 100644
--- a/configs/omapl138_lcdk_defconfig
+++ b/configs/omapl138_lcdk_defconfig
@@ -33,10 +33,13 @@ CONFIG_CMD_MTDPARTS=y
CONFIG_CMD_DIAG=y
CONFIG_CMD_UBI=y
CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="da850-lcdk"
+CONFIG_SPL_OF_PLATDATA=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM=y
+CONFIG_SPL_DM=y
CONFIG_DM_I2C=y
CONFIG_DM_I2C_COMPAT=y
CONFIG_SYS_I2C_DAVINCI=y
@@ -53,8 +56,10 @@ CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_MII=y
CONFIG_DRIVER_TI_EMAC=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
CONFIG_DM_SERIAL=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DAVINCI_SPI=y
CONFIG_USE_TINY_PRINTF=y
+# CONFIG_SPL_OF_LIBFDT is not set
--
2.21.0
next prev parent reply other threads:[~2019-05-28 9:58 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-28 9:58 [U-Boot] [PATCH 0/4] davinci: omapl138-lcdk: enable CONFIG_SPL_DM Bartosz Golaszewski
2019-05-28 9:58 ` [U-Boot] [PATCH 1/4] davinci: omapl138-lcdk: enable SPL_SYS_MALLOC_SIMPLE Bartosz Golaszewski
2019-05-28 9:58 ` [U-Boot] [PATCH 2/4] davinci: omapl138-lcdk: enable CONFIG_USE_TINY_PRINTF Bartosz Golaszewski
2019-05-28 9:58 ` [U-Boot] [PATCH 3/4] davinci: omapl138-lcdk: remove unneeded includes Bartosz Golaszewski
2019-05-28 9:58 ` Bartosz Golaszewski [this message]
2019-05-28 15:05 ` [U-Boot] [PATCH 4/4] davinci: omapl138-lcdk: enable driver-model in SPL Adam Ford
2019-05-29 9:40 ` Bartosz Golaszewski
2019-05-29 13:04 ` Adam Ford
2019-05-29 13:23 ` Bartosz Golaszewski
2019-05-29 13:47 ` Adam Ford
2019-05-29 14:15 ` Bartosz Golaszewski
2019-06-24 8:18 ` [U-Boot] [PATCH 0/4] davinci: omapl138-lcdk: enable CONFIG_SPL_DM Bartosz Golaszewski
2019-07-03 13:00 ` Bartosz Golaszewski
2019-07-03 13:09 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190528095825.24835-5-brgl@bgdev.pl \
--to=brgl@bgdev.pl \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox