[U-Boot] [PATCH V2] arm: omap3: Manually initialize GPIO if OF_CONTROL doesn't

[Adam Ford <aford173@gmail.com>]

The commong initialization code manually initializes the GPIO
even when OF_CONTROL does it, so we can reduce the code size a
bit by not doing it manually when we have device tree support.

Using the omap3_logic board (dm3730), the sizes shrunk:

Before:

   text	   data	    bss	    dec	    hex	filename
 561066	  28596	 116880	 706542	  ac7ee	u-boot
  55245	   1605	   1888	  58738	   e572	spl/u-boot-spl

After
  text	   data	    bss	    dec	    hex	filename
 560898	  28548	 116872	 706318	  ac70e	u-boot
  55121	   1557	   1888	  58566	   e4c6	spl/u-boot-spl

Signed-off-by: Adam Ford <aford173@gmail.com>
---
V2:  Fix accidentally checked in #if 1 instead of what I wanted

diff --git a/arch/arm/mach-omap2/omap3/board.c b/arch/arm/mach-omap2/omap3/board.c
index 2d25fc60a0..658ef8c1f1 100644
--- a/arch/arm/mach-omap2/omap3/board.c
+++ b/arch/arm/mach-omap2/omap3/board.c
@@ -34,6 +34,8 @@ static void omap3_invalidate_l2_cache_secure(void);
 #endif
 
 #ifdef CONFIG_DM_GPIO
+#if !CONFIG_IS_ENABLED(OF_CONTROL)
+/* Manually initialize GPIO banks when OF_CONTROL doesn't */
 static const struct omap_gpio_platdata omap34xx_gpio[] = {
 	{ 0, OMAP34XX_GPIO1_BASE },
 	{ 1, OMAP34XX_GPIO2_BASE },
@@ -51,7 +53,7 @@ U_BOOT_DEVICES(omap34xx_gpios) = {
 	{ "gpio_omap", &omap34xx_gpio[4] },
 	{ "gpio_omap", &omap34xx_gpio[5] },
 };
-
+#endif
 #else
 
 static const struct gpio_bank gpio_bank_34xx[6] = {
-- 
2.17.1