From: Andreas Dannenberg <dannenberg@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 01/18] i2c: omap24xx_i2c: Adapt driver to support K3 devices
Date: Tue, 4 Jun 2019 18:08:11 -0500 [thread overview]
Message-ID: <20190604230828.12539-2-dannenberg@ti.com> (raw)
In-Reply-To: <20190604230828.12539-1-dannenberg@ti.com>
From: Vignesh R <vigneshr@ti.com>
K3 devices have I2C IP that is same as OMAP2+ family. Allow driver to be
compiled for ARCH_K3.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
---
drivers/i2c/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 095a9bc6a4..4772db3837 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -330,7 +330,7 @@ endif
config SYS_I2C_OMAP24XX
bool "TI OMAP2+ I2C driver"
- depends on ARCH_OMAP2PLUS
+ depends on ARCH_OMAP2PLUS || ARCH_K3
help
Add support for the OMAP2+ I2C driver.
--
2.17.1
next prev parent reply other threads:[~2019-06-04 23:08 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-04 23:08 [U-Boot] [PATCH v3 00/18] Add EEPROM-based board detect support for TI K3 SoCs Andreas Dannenberg
2019-06-04 23:08 ` Andreas Dannenberg [this message]
2019-07-19 0:01 ` [U-Boot] [PATCH v3 01/18] i2c: omap24xx_i2c: Adapt driver to support K3 devices Tom Rini
2019-06-04 23:08 ` [U-Boot] [PATCH v3 02/18] arm: omap_i2c: Remove unwanted header file inclusion Andreas Dannenberg
2019-07-19 0:01 ` Tom Rini
2019-06-04 23:08 ` [U-Boot] [PATCH v3 03/18] arm: dts: k3-am65: Move pinctrl nodes out of U-Boot specific dtsi Andreas Dannenberg
2019-07-19 0:01 ` Tom Rini
2019-06-04 23:08 ` [U-Boot] [PATCH v3 04/18] arm: dts: k3-am65: Add I2C nodes Andreas Dannenberg
2019-07-19 0:01 ` Tom Rini
2019-06-04 23:08 ` [U-Boot] [PATCH v3 05/18] arm: dts: k3-am654-base-board: Enable wkup_i2c0 across all boot stages Andreas Dannenberg
2019-07-19 0:01 ` Tom Rini
2019-06-04 23:08 ` [U-Boot] [PATCH v3 06/18] configs: am65x_evm_defconfig: Enable I2C support Andreas Dannenberg
2019-07-19 0:01 ` Tom Rini
2019-06-04 23:08 ` [U-Boot] [PATCH v3 07/18] configs: am65x_hs_evm_defconfig: " Andreas Dannenberg
2019-07-19 0:02 ` Tom Rini
2019-06-04 23:08 ` [U-Boot] [PATCH v3 08/18] arm64: dts: k3-am654-base-board: Add I2C GPIO expander @ 0x38 Andreas Dannenberg
2019-07-19 0:02 ` Tom Rini
2019-06-04 23:08 ` [U-Boot] [PATCH v3 09/18] configs: am65x_evm_a53: Enable PCA953X-type GPIO driver Andreas Dannenberg
2019-07-19 0:02 ` Tom Rini
2019-06-04 23:08 ` [U-Boot] [PATCH v3 10/18] configs: am65x_hs_evm_a53: " Andreas Dannenberg
2019-07-19 0:02 ` Tom Rini
2019-06-04 23:08 ` [U-Boot] [PATCH v3 11/18] configs: am65x_evm_a53: Increase malloc pool before relocation Andreas Dannenberg
2019-07-19 0:02 ` Tom Rini
2019-06-04 23:08 ` [U-Boot] [PATCH v3 12/18] configs: am65x_hs_evm_a53: " Andreas Dannenberg
2019-07-19 0:02 ` Tom Rini
2019-06-04 23:08 ` [U-Boot] [PATCH v3 13/18] arm: K3: am654: Map common EEPROM data into SRAM scratch space Andreas Dannenberg
2019-07-19 0:02 ` Tom Rini
2019-06-04 23:08 ` [U-Boot] [PATCH v3 14/18] ti: common: am6: Add support for board description EEPROM Andreas Dannenberg
2019-07-19 0:02 ` Tom Rini
2019-06-04 23:08 ` [U-Boot] [PATCH v3 15/18] ti: common: am6: Add support for setting MAC addresses Andreas Dannenberg
2019-07-19 0:02 ` Tom Rini
2019-06-04 23:08 ` [U-Boot] [PATCH v3 16/18] board: ti: am654: Use EEPROM-based board detection Andreas Dannenberg
2019-07-19 0:03 ` Tom Rini
2019-06-04 23:08 ` [U-Boot] [PATCH v3 17/18] configs: am65x_evm: Add support for applying overlays Andreas Dannenberg
2019-07-19 0:03 ` Tom Rini
2019-06-04 23:08 ` [U-Boot] [PATCH v3 18/18] configs: am65x_hs_evm: " Andreas Dannenberg
2019-07-19 0:03 ` Tom Rini
2019-06-05 6:23 ` [U-Boot] [PATCH v3 00/18] Add EEPROM-based board detect support for TI K3 SoCs Lokesh Vutla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190604230828.12539-2-dannenberg@ti.com \
--to=dannenberg@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox