From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lukasz Majewski Date: Tue, 4 Jun 2019 23:46:04 +0200 Subject: [U-Boot] [PATCH v2 3/3] usb: gadget: f_sdp: Allow SPL to load and boot FIT via SDP In-Reply-To: References: <20190604195629.27049-1-sjoerd.simons@collabora.co.uk> <20190604195629.27049-4-sjoerd.simons@collabora.co.uk> Message-ID: <20190604234529.0b870eab@jawa> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Fabio, > Hi Sjoerd, > > On Tue, Jun 4, 2019 at 4:58 PM Sjoerd Simons > wrote: > > > > From: Frieder Schrempf > > > > Add support for loading u-boot FIT images over the USB SDP protocol > > in the SPL > > > > Signed-off-by: Frieder Schrempf > > [Various build fixes] > > Signed-off-by: Sjoerd Simons > > Unfortunately, it still fails with imx_usb_loader due to the lack of > IVT. I do observe another issue - one of my "factory" board setup is not using (till now) OF_CONFIG. Without u-boot.img being a FitImage wrapped, the imx_usb_loader works correctly (with current mainline). After this change I do see the issue with imx_usb_loader. Unfortunately, applying this patch doesn't help. I will investigate this issue further tomorrow. > > Secure boot also needs IVT, so we need to find a way to insert IVT in > the FIT image. > > Tested with UUU and it worked, so this is progress :-) > > Tested-by: Fabio Estevam > > Thanks > _______________________________________________ > U-Boot mailing list > U-Boot at lists.denx.de > https://lists.denx.de/listinfo/u-boot Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 488 bytes Desc: OpenPGP digital signature URL: