public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Lukasz Majewski <lukma@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/2] watchdog: Split WDT from SPL_WDT
Date: Thu, 6 Jun 2019 10:16:35 +0200	[thread overview]
Message-ID: <20190606101635.3348e3b9@jawa> (raw)
In-Reply-To: <5030d390-5015-0e07-3622-fe73d9f516ca@denx.de>

On Thu, 6 Jun 2019 10:08:04 +0200
Marek Vasut <marex@denx.de> wrote:

> On 6/6/19 10:00 AM, Lukasz Majewski wrote:
> > On Thu, 6 Jun 2019 09:26:04 +0200
> > Marek Vasut <marex@denx.de> wrote:
> >   
> >> On 6/6/19 9:09 AM, Lukasz Majewski wrote:  
> >>> On Wed, 5 Jun 2019 18:24:11 +0200
> >>> Lukasz Majewski <lukma@denx.de> wrote:
> >>>     
> >>>> Hi Marek,
> >>>>    
> >>>>> On Sun, 12 May 2019 23:34:52 +0200
> >>>>> Marek Vasut <marex@denx.de> wrote:
> >>>>>       
> >>>>>> Use CONFIG_IS_ENABLED(WDT) to permit use of WDT in SPL without
> >>>>>> DM, while the full U-Boot can use rich DM/DT WDT driver.
> >>>>>>
> >>>>>> Signed-off-by: Marek Vasut <marex@denx.de>
> >>>>>> Cc: Peng Fan <Peng.Fan@freescale.com>
> >>>>>> Cc: Stefano Babic <sbabic@denx.de>
> >>>>>> ---
> >>>>>>  common/board_r.c                  | 2 +-
> >>>>>>  common/spl/spl.c                  | 2 +-
> >>>>>>  drivers/watchdog/Makefile         | 2 +-
> >>>>>>  include/asm-generic/global_data.h | 2 +-
> >>>>>>  include/wdt.h                     | 2 +-
> >>>>>>  5 files changed, 5 insertions(+), 5 deletions(-)
> >>>>>>
> >>>>>> diff --git a/common/board_r.c b/common/board_r.c
> >>>>>> index 150e8cd424..988e40abb2 100644
> >>>>>> --- a/common/board_r.c
> >>>>>> +++ b/common/board_r.c
> >>>>>> @@ -678,7 +678,7 @@ static init_fnc_t init_sequence_r[] = {
> >>>>>>  #ifdef CONFIG_DM
> >>>>>>  	initr_dm,
> >>>>>>  #endif
> >>>>>> -#if defined(CONFIG_WDT)
> >>>>>> +#if CONFIG_IS_ENABLED(WDT)
> >>>>>>  	initr_watchdog,
> >>>>>>  #endif
> >>>>>>  #if defined(CONFIG_ARM) || defined(CONFIG_NDS32) ||
> >>>>>> defined(CONFIG_RISCV) || \ diff --git a/common/spl/spl.c
> >>>>>> b/common/spl/spl.c index 0a6a47c202..f22f854718 100644
> >>>>>> --- a/common/spl/spl.c
> >>>>>> +++ b/common/spl/spl.c
> >>>>>> @@ -601,7 +601,7 @@ void board_init_r(gd_t *dummy1, ulong
> >>>>>> dummy2) spl_board_init();
> >>>>>>  #endif
> >>>>>>  
> >>>>>> -#if defined(CONFIG_SPL_WATCHDOG_SUPPORT) &&
> >>>>>> defined(CONFIG_WDT) +#if defined(CONFIG_SPL_WATCHDOG_SUPPORT)
> >>>>>> && CONFIG_IS_ENABLED(WDT) initr_watchdog();
> >>>>>>  #endif
> >>>>>>  
> >>>>>> diff --git a/drivers/watchdog/Makefile
> >>>>>> b/drivers/watchdog/Makefile index 40b2f4bc66..4b94ae988c 100644
> >>>>>> --- a/drivers/watchdog/Makefile
> >>>>>> +++ b/drivers/watchdog/Makefile
> >>>>>> @@ -16,7 +16,7 @@ obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o
> >>>>>>  obj-$(CONFIG_DESIGNWARE_WATCHDOG) += designware_wdt.o
> >>>>>>  obj-$(CONFIG_TANGIER_WATCHDOG) += tangier_wdt.o
> >>>>>>  obj-$(CONFIG_ULP_WATCHDOG) += ulp_wdog.o
> >>>>>> -obj-$(CONFIG_WDT) += wdt-uclass.o
> >>>>>> +obj-$(CONFIG_$(SPL_TPL_)WDT) += wdt-uclass.o
> >>>>>>  obj-$(CONFIG_WDT_SANDBOX) += sandbox_wdt.o
> >>>>>>  obj-$(CONFIG_WDT_ARMADA_37XX) += armada-37xx-wdt.o
> >>>>>>  obj-$(CONFIG_WDT_ASPEED) += ast_wdt.o
> >>>>>> diff --git a/include/asm-generic/global_data.h
> >>>>>> b/include/asm-generic/global_data.h index
> >>>>>> 02a3ed6838..7c2220643b 100644 ---
> >>>>>> a/include/asm-generic/global_data.h +++
> >>>>>> b/include/asm-generic/global_data.h @@ -137,7 +137,7 @@
> >>>>>> typedef struct global_data { #if
> >>>>>> defined(CONFIG_TRANSLATION_OFFSET) fdt_addr_t
> >>>>>> translation_offset;	/* optional translation offset */
> >>>>>> #endif -#if defined(CONFIG_WDT)
> >>>>>> +#if CONFIG_IS_ENABLED(WDT)
> >>>>>>  	struct udevice *watchdog_dev;
> >>>>>>  #endif
> >>>>>>  } gd_t;
> >>>>>> diff --git a/include/wdt.h b/include/wdt.h
> >>>>>> index aa77d3e9b4..5bcff24ab3 100644
> >>>>>> --- a/include/wdt.h
> >>>>>> +++ b/include/wdt.h
> >>>>>> @@ -106,7 +106,7 @@ struct wdt_ops {
> >>>>>>  	int (*expire_now)(struct udevice *dev, ulong flags);
> >>>>>>  };
> >>>>>>  
> >>>>>> -#if defined(CONFIG_WDT)
> >>>>>> +#if CONFIG_IS_ENABLED(WDT)
> >>>>>>  #ifndef CONFIG_WATCHDOG_TIMEOUT_MSECS
> >>>>>>  #define CONFIG_WATCHDOG_TIMEOUT_MSECS	(60 * 1000)
> >>>>>>  #endif        
> >>>>>
> >>>>> Tested-by: Lukasz Majewski <lukma@denx.de>
> >>>>>
> >>>>> Test HW: display5 i.MX6Q device 
> >>>>>       
> >>>>
> >>>> Unfortunately this series causes build break when run on
> >>>> Travis-CI for some Atmel/Microchip:
> >>>>
> >>>> arm:  +   picosam9g45
> >>>> +lib/built-in.o: In function `udelay':
> >>>> +lib/time.c:167: undefined reference to `watchdog_reset'
> >>>> +drivers/built-in.o: In function `atmel_serial_getc':
> >>>> +drivers/serial/atmel_usart.c:103: undefined reference to
> >>>>        `watchdog_reset' +make[2]: *** [spl/u-boot-spl] Error 1
> >>>> +make[1]: *** [spl/u-boot-spl] Error 2
> >>>> +make: *** [sub-make] Error 2
> >>>>    14   38    1 /53     axm
> >>>> boards.cfg is up to date. Nothing to do.
> >>>> Summary of current source for 53 boards (2 threads, 1 job per
> >>>> thread)
> >>>>
> >>>>
> >>>> u-boot master SHA1: e1a2ed7180adeefb6164239a18249dca5701319d
> >>>>    
> >>>
> >>> The fix is under Travis-CI testing:
> >>> https://travis-ci.org/lmajewski/u-boot-dfu/builds/542118403
> >>>
> >>> I will post patches when it finishes.    
> >>
> >> What's the fix ?
> >>  
> > 
> > https://github.com/lmajewski/u-boot-dfu/commit/98c95790fee02296023a2906811092a1868f622d
> > 
> > I've explicitly enabled SPL_WDT=y for affected boards.  
> 
> I don't think that's the right approach, it should be possible to do
> without explicit board config modification. I'm building another take,
> since some boards still failed to build.
> 

Just to be clear - if it works with imply - I'm for this solution.

However, if it breaks, then we may need to find another solution (as
for example shown here:
https://github.com/lmajewski/u-boot-dfu/commit/98c95790fee02296023a2906811092a1868f622d
 - the number of affected boards is small - just 3 of them).

Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190606/a0903f6e/attachment.sig>

  reply	other threads:[~2019-06-06  8:16 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-12 21:34 [U-Boot] [PATCH 1/2] watchdog: Split WDT from SPL_WDT Marek Vasut
2019-05-12 21:34 ` [U-Boot] [PATCH 2/2] watchdog: imx: Add DM support Marek Vasut
2019-05-15  5:54   ` Peng Fan
2019-06-04 21:21   ` Lukasz Majewski
2019-05-15  5:46 ` [U-Boot] [PATCH 1/2] watchdog: Split WDT from SPL_WDT Peng Fan
2019-06-04 21:22 ` Lukasz Majewski
2019-06-05 16:24   ` Lukasz Majewski
2019-06-06  7:09     ` Lukasz Majewski
2019-06-06  7:26       ` Marek Vasut
2019-06-06  8:00         ` Lukasz Majewski
2019-06-06  8:08           ` Marek Vasut
2019-06-06  8:16             ` Lukasz Majewski [this message]
2019-06-06  8:23               ` Marek Vasut
2019-06-06  8:28                 ` Lukasz Majewski
2019-06-08  6:23                 ` Lukasz Majewski
2019-06-08 15:32                   ` Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190606101635.3348e3b9@jawa \
    --to=lukma@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox