From: Bartosz Golaszewski <brgl@bgdev.pl>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/4] nand: davinci: add support for driver model
Date: Thu, 6 Jun 2019 17:49:58 +0200 [thread overview]
Message-ID: <20190606155000.1685-3-brgl@bgdev.pl> (raw)
In-Reply-To: <20190606155000.1685-1-brgl@bgdev.pl>
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Extend the davinci NAND driver to support the driver model. For now this
doesn't add any device-tree parsing due to the fact that we can't access
the actual nand node on the device-tree - it's a subnode of the aemif
device and we don't have an aemif driver on davinci at the moment.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
drivers/mtd/nand/raw/davinci_nand.c | 46 ++++++++++++++++++++++++++++-
1 file changed, 45 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/raw/davinci_nand.c b/drivers/mtd/nand/raw/davinci_nand.c
index e1c4498cb9..33c2f16be8 100644
--- a/drivers/mtd/nand/raw/davinci_nand.c
+++ b/drivers/mtd/nand/raw/davinci_nand.c
@@ -31,6 +31,7 @@
#include <common.h>
#include <asm/io.h>
#include <nand.h>
+#include <dm/uclass.h>
#include <asm/ti-common/davinci_nand.h>
/* Definitions for 4-bit hardware ECC */
@@ -785,10 +786,53 @@ static void davinci_nand_init(struct nand_chip *nand)
nand->dev_ready = nand_davinci_dev_ready;
}
-int board_nand_init(struct nand_chip *chip) __attribute__((weak));
+#ifdef CONFIG_SYS_NAND_SELF_INIT
+static int davinci_nand_probe(struct udevice *dev)
+{
+ struct nand_chip *nand = dev_get_priv(dev);
+ struct mtd_info *mtd = nand_to_mtd(nand);
+ int ret;
+
+ nand->IO_ADDR_R = (void __iomem *)CONFIG_SYS_NAND_BASE;
+ nand->IO_ADDR_W = (void __iomem *)CONFIG_SYS_NAND_BASE;
+
+ davinci_nand_init(nand);
+
+ ret = nand_scan(mtd, CONFIG_SYS_NAND_MAX_CHIPS);
+ if (ret)
+ return ret;
+
+ return nand_register(0, mtd);
+}
+
+static const struct udevice_id davinci_nand_ids[] = {
+ { .compatible = "ti,davinci-nand" },
+ { }
+};
+
+U_BOOT_DRIVER(davinci_nand) = {
+ .name = "davinci-nand",
+ .id = UCLASS_MTD,
+ .of_match = davinci_nand_ids,
+ .probe = davinci_nand_probe,
+ .priv_auto_alloc_size = sizeof(struct nand_chip),
+};
+
+void board_nand_init(void)
+{
+ struct udevice *dev;
+ int ret;
+ ret = uclass_get_device_by_driver(UCLASS_MTD,
+ DM_GET_DRIVER(davinci_nand), &dev);
+ if (ret && ret != -ENODEV)
+ pr_err("Failed to initialize %s: %d\n", dev->name, ret);
+}
+#else
+int board_nand_init(struct nand_chip *chip) __attribute__((weak));
int board_nand_init(struct nand_chip *chip)
{
davinci_nand_init(chip);
return 0;
}
+#endif /* CONFIG_SYS_NAND_SELF_INIT */
--
2.21.0
next prev parent reply other threads:[~2019-06-06 15:49 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-06 15:49 [U-Boot] [PATCH 0/4] nand: davinci: enable driver model for NAND Bartosz Golaszewski
2019-06-06 15:49 ` [U-Boot] [PATCH 1/4] nand: davinci: make davinci_nand_init() static Bartosz Golaszewski
2019-06-06 15:49 ` Bartosz Golaszewski [this message]
2019-06-06 15:49 ` [U-Boot] [PATCH 3/4] davinci: omapl138-lcdk: enable driver model for NAND Bartosz Golaszewski
2019-06-06 15:50 ` [U-Boot] [PATCH 4/4] davinci: da850-evm: " Bartosz Golaszewski
2019-06-07 19:58 ` Adam Ford
2019-06-06 15:58 ` [U-Boot] [PATCH 0/4] nand: davinci: " Adam Ford
2019-06-07 8:16 ` Bartosz Golaszewski
2019-07-03 13:01 ` Bartosz Golaszewski
2019-07-03 13:10 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190606155000.1685-3-brgl@bgdev.pl \
--to=brgl@bgdev.pl \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox