From: Bartosz Golaszewski <brgl@bgdev.pl>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 4/4] davinci: da850-evm: enable driver model for NAND
Date: Thu, 6 Jun 2019 17:50:00 +0200 [thread overview]
Message-ID: <20190606155000.1685-5-brgl@bgdev.pl> (raw)
In-Reply-To: <20190606155000.1685-1-brgl@bgdev.pl>
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Enable the driver-model on da850-evm. We need to add a dummy nand node
to the device tree, as the real nand node is a sub-node of the aemif
device.
On linux the aemif driver populates all its child nodes, but we can't do
it in u-boot currently.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
arch/arm/dts/da850-evm-u-boot.dtsi | 4 ++++
configs/da850evm_defconfig | 1 +
configs/da850evm_direct_nor_defconfig | 1 +
configs/da850evm_nand_defconfig | 1 +
include/configs/da850evm.h | 4 ++++
5 files changed, 11 insertions(+)
diff --git a/arch/arm/dts/da850-evm-u-boot.dtsi b/arch/arm/dts/da850-evm-u-boot.dtsi
index 1683f3472e..d9e8b9926a 100644
--- a/arch/arm/dts/da850-evm-u-boot.dtsi
+++ b/arch/arm/dts/da850-evm-u-boot.dtsi
@@ -10,6 +10,10 @@
soc at 1c00000 {
u-boot,dm-spl;
};
+
+ nand {
+ compatible = "ti,davinci-nand";
+ };
};
&flash {
diff --git a/configs/da850evm_defconfig b/configs/da850evm_defconfig
index c095058282..8a891eb8aa 100644
--- a/configs/da850evm_defconfig
+++ b/configs/da850evm_defconfig
@@ -52,6 +52,7 @@ CONFIG_DA8XX_GPIO=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_DAVINCI=y
CONFIG_DM_MMC=y
+CONFIG_MTD=y
CONFIG_MTD_DEVICE=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
diff --git a/configs/da850evm_direct_nor_defconfig b/configs/da850evm_direct_nor_defconfig
index 166e77b8e3..85c96f9951 100644
--- a/configs/da850evm_direct_nor_defconfig
+++ b/configs/da850evm_direct_nor_defconfig
@@ -42,6 +42,7 @@ CONFIG_DA8XX_GPIO=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_DAVINCI=y
# CONFIG_MMC is not set
+CONFIG_MTD=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_PROTECTION=y
diff --git a/configs/da850evm_nand_defconfig b/configs/da850evm_nand_defconfig
index 7271016346..187087768f 100644
--- a/configs/da850evm_nand_defconfig
+++ b/configs/da850evm_nand_defconfig
@@ -49,6 +49,7 @@ CONFIG_DM_GPIO=y
CONFIG_DA8XX_GPIO=y
CONFIG_DM_I2C=y
CONFIG_DM_MMC=y
+CONFIG_MTD=y
CONFIG_NAND=y
CONFIG_NAND_DAVINCI=y
CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index ccdac0abec..b8556adbb1 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -182,6 +182,10 @@
#define CONFIG_SPL_NAND_DRIVERS
#define CONFIG_SPL_NAND_ECC
#define CONFIG_SPL_NAND_LOAD
+
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_SYS_NAND_SELF_INIT
+#endif
#endif
/*
--
2.21.0
next prev parent reply other threads:[~2019-06-06 15:50 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-06 15:49 [U-Boot] [PATCH 0/4] nand: davinci: enable driver model for NAND Bartosz Golaszewski
2019-06-06 15:49 ` [U-Boot] [PATCH 1/4] nand: davinci: make davinci_nand_init() static Bartosz Golaszewski
2019-06-06 15:49 ` [U-Boot] [PATCH 2/4] nand: davinci: add support for driver model Bartosz Golaszewski
2019-06-06 15:49 ` [U-Boot] [PATCH 3/4] davinci: omapl138-lcdk: enable driver model for NAND Bartosz Golaszewski
2019-06-06 15:50 ` Bartosz Golaszewski [this message]
2019-06-07 19:58 ` [U-Boot] [PATCH 4/4] davinci: da850-evm: " Adam Ford
2019-06-06 15:58 ` [U-Boot] [PATCH 0/4] nand: davinci: " Adam Ford
2019-06-07 8:16 ` Bartosz Golaszewski
2019-07-03 13:01 ` Bartosz Golaszewski
2019-07-03 13:10 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190606155000.1685-5-brgl@bgdev.pl \
--to=brgl@bgdev.pl \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox