[U-Boot] [PATCH v7 2/2] board: toradex: add colibri imx8qxp 2gb wb

[sbabic at denx.de <sbabic@denx.de>]

> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> This commit adds initial support for the Toradex Colibri iMX8QXP 2GB WB
> IT V1.0B module. Unlike the V1.0A early access samples exclusively
> booting from SD card, they are now strapped to boot from eFuses which
> are factory fused to properly boot from their on-module eMMC. U-Boot
> supports either booting from the on-module eMMC or may be used for
> recovery purpose using the universal update utility (uuu) aka mfgtools
> 3.0.
> Functionality wise the following is known to be working:
> - eMMC and MMC/SD card
> - Ethernet
> - GPIOs
> - I2C
> Unfortunately, there is no USB functionality for the i.MX 8QXP as of
> yet.
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================