[U-Boot] [PATCH v1 1/2] config: Update KP's imx53 HSC config to support SWUpdate

[U-Boot] [PATCH v1 1/2] config: Update KP's imx53 HSC config to support SWUpdate

[Lukasz Majewski]

This commit updates envs responsible for using USB pendrive as a
SWUpdate based tool for recovery and update.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

---

 include/configs/kp_imx53.h | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/include/configs/kp_imx53.h b/include/configs/kp_imx53.h
index a252e9003d..9c7c908453 100644
--- a/include/configs/kp_imx53.h
+++ b/include/configs/kp_imx53.h
@@ -41,8 +41,9 @@
 	"addinitrd=setenv bootargs ${bootargs} rdinit=${rdinit} ${debug} \0" \
 	"upd_image=st.4k\0" \
 	"uboot_file=u-boot.imx\0" \
-	"updargs=setenv bootargs console=${console} ${smp}"\
-	       "rdinit=${rdinit} ${debug} ${displayargs}\0" \
+	"updargs=setenv bootargs console=${console} ${smp} ${displayargs}\0" \
+	"initrd_ram_dev=/dev/ram\0" \
+	"addswupdate=setenv bootargs ${bootargs} root=${initrd_ram_dev} rw\0" \
 	"loadusb=usb start; " \
 	       "fatload usb 0 ${loadaddr} ${upd_image}\0" \
 	"up=if tftp ${loadaddr} ${uboot_file}; then " \
@@ -59,6 +60,8 @@
 	"usbupd=echo Booting update from usb ...; " \
 	       "setenv bootargs; " \
 	       "run updargs; " \
+	       "run addinitrd; " \
+	       "run addswupdate; " \
 	       "run loadusb; " \
 	       "bootm ${loadaddr}#${fit_config}\0" \
 	BOOTENV
-- 
2.11.0

[U-Boot] [PATCH v1 2/2] config: Update KP's imx53 HSC config to pass key pressed information

[Lukasz Majewski]

The information about pressed key is relevant in performing correct
update and recovery scenarios via USB pendrive.

This commit modifies envs to provide it.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
---

 include/configs/kp_imx53.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/configs/kp_imx53.h b/include/configs/kp_imx53.h
index 9c7c908453..55bfa0fe59 100644
--- a/include/configs/kp_imx53.h
+++ b/include/configs/kp_imx53.h
@@ -44,6 +44,7 @@
 	"updargs=setenv bootargs console=${console} ${smp} ${displayargs}\0" \
 	"initrd_ram_dev=/dev/ram\0" \
 	"addswupdate=setenv bootargs ${bootargs} root=${initrd_ram_dev} rw\0" \
+	"addkeys=setenv bootargs ${bootargs} di=${dig_in} key1=${key1}\0" \
 	"loadusb=usb start; " \
 	       "fatload usb 0 ${loadaddr} ${upd_image}\0" \
 	"up=if tftp ${loadaddr} ${uboot_file}; then " \
@@ -62,6 +63,7 @@
 	       "run updargs; " \
 	       "run addinitrd; " \
 	       "run addswupdate; " \
+	       "run addkeys; " \
 	       "run loadusb; " \
 	       "bootm ${loadaddr}#${fit_config}\0" \
 	BOOTENV
-- 
2.11.0

[U-Boot] [PATCH v1 2/2] config: Update KP's imx53 HSC config to

[sbabic at denx.de]

> The information about pressed key is relevant in performing correct
> update and recovery scenarios via USB pendrive.
> This commit modifies envs to provide it.
> Signed-off-by: Lukasz Majewski <lukma@denx.de>

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

[U-Boot] [PATCH v1 1/2] config: Update KP's imx53 HSC config to

[sbabic at denx.de]

> This commit updates envs responsible for using USB pendrive as a
> SWUpdate based tool for recovery and update.
> Signed-off-by: Lukasz Majewski <lukma@denx.de>

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================