[U-Boot] [RFC 0/4] Convert fsl_dcu_fb to DM_VIDEO

[Igor Opaniuk <igor.opaniuk@gmail.com>]

From: Igor Opaniuk <igor.opaniuk@toradex.com>

This series of patches refactors and extends NXP DCU video driver to
be built with DM_VIDEO enabled. DTS files must additionally include
'u-boot,dm-pre-reloc' property in soc and child nodes to enable driver
binding to fsl_dcu_fb device.

Current limitations: configuration (display timings etc.) isn't fetched
from the DT node. I plan to add this in the next series.

Also enables DM_VIDEO by default for Colibri VF.


Igor Opaniuk (4):
  video: fsl_dcu_fb: refactor init functions
  video: fsl_dcu_fb: add DM_VIDEO support
  ARM: dts: colibri_vf: Add dcu0 node
  colibri_vf: enable DM_VIDEO

 arch/arm/dts/vf-colibri-u-boot.dtsi   |   4 +
 arch/arm/dts/vf-colibri.dtsi          |   5 +
 arch/arm/dts/vf.dtsi                  |   6 +
 board/freescale/ls1021aqds/dcu.c      |   6 +-
 board/toradex/colibri_vf/colibri_vf.c |   4 +-
 board/toradex/colibri_vf/dcu.c        |   6 +-
 configs/colibri_vf_defconfig          |   2 +-
 drivers/video/Kconfig                 |   2 +-
 drivers/video/fsl_dcu_fb.c            | 213 ++++++++++++++++++--------
 include/fsl_dcu_fb.h                  |  12 +-
 10 files changed, 187 insertions(+), 73 deletions(-)

-- 
2.17.1