From: Fabio Estevam <festevam@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 3/7] wandboard: Sync with devicetree files from kernel 5.1.9
Date: Wed, 12 Jun 2019 12:34:37 -0300 [thread overview]
Message-ID: <20190612153441.19020-3-festevam@gmail.com> (raw)
In-Reply-To: <20190612153441.19020-1-festevam@gmail.com>
Udate the wandboard devicetree files with the ones
from kernel 5.1.9.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
arch/arm/dts/imx6dl-wandboard-revb1.dts | 1 +
arch/arm/dts/imx6qdl-wandboard-revb1.dtsi | 15 +--
arch/arm/dts/imx6qdl-wandboard.dtsi | 107 +---------------------
3 files changed, 11 insertions(+), 112 deletions(-)
diff --git a/arch/arm/dts/imx6dl-wandboard-revb1.dts b/arch/arm/dts/imx6dl-wandboard-revb1.dts
index 738db4fc77..c2946fbaa0 100644
--- a/arch/arm/dts/imx6dl-wandboard-revb1.dts
+++ b/arch/arm/dts/imx6dl-wandboard-revb1.dts
@@ -13,6 +13,7 @@
compatible = "wand,imx6dl-wandboard", "fsl,imx6dl";
memory at 10000000 {
+ device_type = "memory";
reg = <0x10000000 0x40000000>;
};
};
diff --git a/arch/arm/dts/imx6qdl-wandboard-revb1.dtsi b/arch/arm/dts/imx6qdl-wandboard-revb1.dtsi
index 855dc6f9df..e781a45785 100644
--- a/arch/arm/dts/imx6qdl-wandboard-revb1.dtsi
+++ b/arch/arm/dts/imx6qdl-wandboard-revb1.dtsi
@@ -1,13 +1,8 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+//
+// Author: Fabio Estevam <fabio.estevam@freescale.com>
#include "imx6qdl-wandboard.dtsi"
diff --git a/arch/arm/dts/imx6qdl-wandboard.dtsi b/arch/arm/dts/imx6qdl-wandboard.dtsi
index 4d03d49fde..50d9a989e0 100644
--- a/arch/arm/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/dts/imx6qdl-wandboard.dtsi
@@ -8,6 +8,10 @@
#include <dt-bindings/gpio/gpio.h>
/ {
+ chosen {
+ stdout-path = &uart1;
+ };
+
sound {
compatible = "fsl,imx6-wandboard-sgtl5000",
"fsl,imx-audio-sgtl5000";
@@ -90,107 +94,6 @@
VDDIO-supply = <®_3p3v>;
lrclk-strength = <3>;
};
-
- pmic: pfuze100 at 8 {
- compatible = "fsl,pfuze100";
- reg = <0x08>;
-
- regulators {
- sw1a_reg: sw1ab {
- regulator-min-microvolt = <300000>;
- regulator-max-microvolt = <1875000>;
- regulator-boot-on;
- regulator-always-on;
- regulator-ramp-delay = <6250>;
- };
-
- sw1c_reg: sw1c {
- regulator-min-microvolt = <300000>;
- regulator-max-microvolt = <1875000>;
- regulator-boot-on;
- regulator-always-on;
- regulator-ramp-delay = <6250>;
- };
-
- sw2_reg: sw2 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- regulator-ramp-delay = <6250>;
- };
-
- sw3a_reg: sw3a {
- regulator-min-microvolt = <400000>;
- regulator-max-microvolt = <1975000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sw3b_reg: sw3b {
- regulator-min-microvolt = <400000>;
- regulator-max-microvolt = <1975000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sw4_reg: sw4 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- swbst_reg: swbst {
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5150000>;
- };
-
- snvs_reg: vsnvs {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <3000000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- vref_reg: vrefddr {
- regulator-boot-on;
- regulator-always-on;
- };
-
- vgen1_reg: vgen1 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1550000>;
- };
-
- vgen2_reg: vgen2 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1550000>;
- };
-
- vgen3_reg: vgen3 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vgen4_reg: vgen4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vgen5_reg: vgen5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vgen6_reg: vgen6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
- };
- };
};
&iomuxc {
@@ -321,7 +224,7 @@
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
--
2.17.1
next prev parent reply other threads:[~2019-06-12 15:34 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-12 15:34 [U-Boot] [PATCH 1/7] mx6: dts: Keep dtb entries sorted Fabio Estevam
2019-06-12 15:34 ` [U-Boot] [PATCH 2/7] mx6: dts: Move dtbs under SoC level Fabio Estevam
2019-06-12 15:34 ` Fabio Estevam [this message]
2019-06-12 15:34 ` [U-Boot] [PATCH 4/7] wandboard: Import extra wandboard devicetree files Fabio Estevam
2019-06-12 15:34 ` [U-Boot] [PATCH 5/7] wandboard: Add mmc0 alias Fabio Estevam
2019-06-12 15:42 ` Peter Robinson
2019-06-14 12:31 ` Fabio Estevam
2019-06-12 15:34 ` [U-Boot] [PATCH 6/7] wandboard: Add FIT image support Fabio Estevam
2019-06-12 15:34 ` [U-Boot] [PATCH 7/7] wandboard: README: Adjust the U-Boot proper binary name Fabio Estevam
2019-06-23 14:04 ` Heinrich Schuchardt
2019-06-24 19:21 ` Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190612153441.19020-3-festevam@gmail.com \
--to=festevam@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox