[U-Boot] [PATCH v2 73/99] ram: sdram: Configure lpddr4 tsel rd, wr based on IO settings

[Jagan Teki <jagan@amarulasolutions.com>]

Now we have IO settings available for all supported sdram
frequencies, so retrieve these IO settings and make used
for LPDDR4 ds odt configuration.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: YouMin Chen <cym@rock-chips.com>
---
 drivers/ram/rockchip/sdram_rk3399.c | 42 ++++++++++++++++++++++++-----
 1 file changed, 36 insertions(+), 6 deletions(-)

diff --git a/drivers/ram/rockchip/sdram_rk3399.c b/drivers/ram/rockchip/sdram_rk3399.c
index 4de5a208f5..22c1a66185 100644
--- a/drivers/ram/rockchip/sdram_rk3399.c
+++ b/drivers/ram/rockchip/sdram_rk3399.c
@@ -184,6 +184,33 @@ struct io_setting {
 	},
 };
 
+/**
+ * phy = 0, PHY boot freq
+ * phy = 1, PHY index 0
+ * phy = 2, PHY index 1
+ */
+static struct io_setting *
+lpddr4_get_io_settings(const struct rk3399_sdram_params *params, u32 mr5)
+{
+	struct io_setting *io = NULL;
+	u32 n;
+
+	for (n = 0; n < ARRAY_SIZE(lpddr4_io_setting); n++) {
+		io = &lpddr4_io_setting[n];
+
+		if (io->mr5 != 0) {
+			if (io->mhz >= params->base.ddr_freq &&
+			    io->mr5 == mr5)
+				break;
+		} else {
+			if (io->mhz >= params->base.ddr_freq)
+				break;
+		}
+	}
+
+	return io;
+}
+
 static void *get_ddrc0_con(struct dram_info *dram, u8 channel)
 {
 	return (channel == 0) ? &dram->grf->ddrc0_con0 : &dram->grf->ddrc0_con1;
@@ -524,7 +551,7 @@ static int phy_io_config(const struct chan_info *chan,
 }
 
 static void set_ds_odt(const struct chan_info *chan,
-		       const struct rk3399_sdram_params *params)
+		       const struct rk3399_sdram_params *params, u32 mr5)
 {
 	u32 *denali_phy = chan->publ->denali_phy;
 
@@ -533,19 +560,22 @@ static void set_ds_odt(const struct chan_info *chan,
 	u32 tsel_idle_select_n, tsel_rd_select_n;
 	u32 tsel_wr_select_dq_p, tsel_wr_select_ca_p;
 	u32 tsel_wr_select_dq_n, tsel_wr_select_ca_n;
+	struct io_setting *io = NULL;
 	u32 reg_value;
 
 	if (params->base.dramtype == LPDDR4) {
+		io = lpddr4_get_io_settings(params, mr5);
+
 		tsel_rd_select_p = PHY_DRV_ODT_HI_Z;
-		tsel_rd_select_n = PHY_DRV_ODT_240;
+		tsel_rd_select_n = io->rd_odt;
 
 		tsel_idle_select_p = PHY_DRV_ODT_HI_Z;
 		tsel_idle_select_n = PHY_DRV_ODT_240;
 
-		tsel_wr_select_dq_p = PHY_DRV_ODT_40;
+		tsel_wr_select_dq_p = io->wr_dq_drv;
 		tsel_wr_select_dq_n = PHY_DRV_ODT_40;
 
-		tsel_wr_select_ca_p = PHY_DRV_ODT_40;
+		tsel_wr_select_ca_p = io->wr_ca_drv;
 		tsel_wr_select_ca_n = PHY_DRV_ODT_40;
 	} else if (params->base.dramtype == LPDDR3) {
 		tsel_rd_select_p = PHY_DRV_ODT_240;
@@ -723,7 +753,7 @@ static void pctl_start(struct dram_info *dram, u8 channel)
 }
 
 static int pctl_cfg(struct dram_info *dram, const struct chan_info *chan,
-		    u32 channel, const struct rk3399_sdram_params *params)
+		    u32 channel, struct rk3399_sdram_params *params)
 {
 	u32 *denali_ctl = chan->pctl->denali_ctl;
 	u32 *denali_pi = chan->pi->denali_pi;
@@ -805,7 +835,7 @@ static int pctl_cfg(struct dram_info *dram, const struct chan_info *chan,
 	copy_to_reg(&denali_phy[512], &params_phy[512], (549 - 512 + 1) * 4);
 	copy_to_reg(&denali_phy[640], &params_phy[640], (677 - 640 + 1) * 4);
 	copy_to_reg(&denali_phy[768], &params_phy[768], (805 - 768 + 1) * 4);
-	set_ds_odt(chan, params);
+	set_ds_odt(chan, params, 0);
 
 	/*
 	 * phy_dqs_tsel_wr_timing_X 8bits DENALI_PHY_84/212/340/468 offset_8
-- 
2.18.0.321.gffc6fa0e3