From mboxrd@z Thu Jan 1 00:00:00 1970 From: Miquel Raynal Date: Mon, 17 Jun 2019 11:06:29 +0200 Subject: [U-Boot] Issue enabling TPM 2.0 on RPI In-Reply-To: <20190617104452.4bac57d1@xps13> References: <7890E00D-0F97-45F3-B728-41E8F377B4E0@gmail.com> <20190617104452.4bac57d1@xps13> Message-ID: <20190617110629.643c1dcd@xps13> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: u-boot@lists.denx.de Hello, Miquel Raynal wrote on Mon, 17 Jun 2019 10:44:52 +0200: > Hi Elena, >=20 > Elena Unix wrote on Fri, 14 Jun 2019 09:43:46 > +0200: >=20 > > Hello, > >=20 > > I am trying to enable the TPM 2.0 SLB9670 in U-Boot for a Raspberry Pi = 3 B+. More precisely, the TPM is on an add-on board, the IRIDIUM SLB9670. Please also mind the voltage levels on the Iridium board which might be different with the Raspberry Pi's. Also try the latest U-Boot, with this patch applied [1]. If it solves your issue, please send a Tested-by on the ML! [1] https://patchwork.ozlabs.org/patch/1100655/ Thanks, Miqu=C3=A8l