[U-Boot] [PATCH v5 3/6] ARM: dts: imx: Provide 'gpio-ranges' for mxs_gpio driver

[Lukasz Majewski <lukma@denx.de>]

On Wed, 19 Jun 2019 16:32:57 +0200
Marek Vasut <marex@denx.de> wrote:

> On 6/19/19 4:19 PM, Lukasz Majewski wrote:
> > Hi Marek,
> >   
> >> On 6/19/19 2:27 PM, Lukasz Majewski wrote:  
> >>> Those properties are U-Boot specific as the mxs gpio Linux driver
> >>> (up to version v5.1.11) is not supporting them.
> >>>
> >>> Signed-off-by: Lukasz Majewski <lukma@denx.de>    
> >>
> >> [...]
> >>  
> >>> +&gpio4 {
> >>> +	gpio-ranges = <&pinctrl 120 0 21>;    
> >>
> >> Are you sure the GPIO controller offset is 120 here ? Shouldn't
> >> that be 0 , while the pin controller offset should be 120 ? Some
> >> for the others ?  
> > 
> > Please find following excerpt from the documentation [1]:
> > 
> > The format is: <[pin controller phandle], [GPIO controller offset],
> >                 [pin controller offset], [number of pins]>;
> > 
> > Example:
> > 
> >     gpio-ranges = <&foo 0 20 10>, <&bar 10 50 20>;
> > 
> > This means:
> > - pins 20..29 on pin controller "foo" is mapped to GPIO line 0..9
> > and
> > - pins 50..69 on pin controller "bar" is mapped to GPIO line 10..29
> > 
> > 
> > The 120 is the GPIO controller offset (logical one) [*] and
> > corresponds to the final GPIO number.
> > 
> > Then we do have the "pin controller offset" which is the pin number
> > start index per controller (like gpio0, gpio1, gpioN). In my case
> > it is always 0.  
> 
> I think you have these two swapped. The pin controller is the
> super-node here, hence each GPIO block is at offset N in the pin
> controller pin space. Each GPIO block then has GPIOs, which either
> start from 0 or M within the GPIO block pin space (in MXS case, this
> is always 0).

Yes, correct. This shall be <&pinctrl 0 120 21>

I will prepare v6.

> 
> [...]
> 
> 




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190619/98f53ce1/attachment.sig>