From: Jagan Teki <jagan@amarulasolutions.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 5/6] board: puma: Get bl31.bin via BL31 and rk3399m0.bin via PMUM0
Date: Thu, 20 Jun 2019 15:37:39 +0530 [thread overview]
Message-ID: <20190620100740.6560-6-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20190620100740.6560-1-jagan@amarulasolutions.com>
Right now puma rk3399 board need to copy bl31-rk3399.bin and
rk3399m0.bin into u-boot source directory to make use of building
u-boot.itb.
So, add environment variable
- BL31 for bl31.bin (instead of bl31-rk3399.bin to compatible with other
platform BL31 env)
- PMUM0 for rk3399m0.bin
If the builds are not exporting BL31, PMUM0 env, the fit_spl_atf.sh will
notify with warning about which document to refer for more information
like this:
WARNING: BL31 file bl31.bin NOT found, resulting binary is non-functional
Please read Building section in doc/README.rockchip
WARNING: PMUM0 file rk3399m0.bin NOT found, resulting binary is non-functional
Please read Building section in doc/README.rockchip
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
.../puma_rk3399/fit_spl_atf.its | 58 ------------
.../puma_rk3399/fit_spl_atf.sh | 94 +++++++++++++++++++
configs/puma-rk3399_defconfig | 2 +-
doc/README.rockchip | 8 +-
4 files changed, 99 insertions(+), 63 deletions(-)
delete mode 100644 board/theobroma-systems/puma_rk3399/fit_spl_atf.its
create mode 100755 board/theobroma-systems/puma_rk3399/fit_spl_atf.sh
diff --git a/board/theobroma-systems/puma_rk3399/fit_spl_atf.its b/board/theobroma-systems/puma_rk3399/fit_spl_atf.its
deleted file mode 100644
index 530f059f3d..0000000000
--- a/board/theobroma-systems/puma_rk3399/fit_spl_atf.its
+++ /dev/null
@@ -1,58 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ OR X11 */
-/*
- * Copyright (C) 2017 Theobroma Systems Design und Consulting GmbH
- *
- * Minimal dts for a SPL FIT image payload.
- */
-
-/dts-v1/;
-
-/ {
- description = "FIT image with U-Boot proper, ATF bl31, M0 Firmware, DTB";
- #address-cells = <1>;
-
- images {
- uboot {
- description = "U-Boot (64-bit)";
- data = /incbin/("../../../u-boot-nodtb.bin");
- type = "standalone";
- os = "U-Boot";
- arch = "arm64";
- compression = "none";
- load = <0x00200000>;
- };
- atf {
- description = "ARM Trusted Firmware";
- data = /incbin/("../../../bl31-rk3399.bin");
- type = "firmware";
- arch = "arm64";
- os = "arm-trusted-firmware";
- compression = "none";
- load = <0x1000>;
- entry = <0x1000>;
- };
- pmu {
- description = "Cortex-M0 firmware";
- data = /incbin/("../../../rk3399m0.bin");
- type = "pmu-firmware";
- compression = "none";
- load = <0x180000>;
- };
- fdt {
- description = "RK3399-Q7 (Puma) flat device-tree";
- data = /incbin/("../../../u-boot.dtb");
- type = "flat_dt";
- compression = "none";
- };
- };
-
- configurations {
- default = "conf";
- conf {
- description = "Theobroma Systems RK3399-Q7 (Puma) SoM";
- firmware = "atf";
- loadables = "uboot", "pmu";
- fdt = "fdt";
- };
- };
-};
diff --git a/board/theobroma-systems/puma_rk3399/fit_spl_atf.sh b/board/theobroma-systems/puma_rk3399/fit_spl_atf.sh
new file mode 100755
index 0000000000..420e7daf4c
--- /dev/null
+++ b/board/theobroma-systems/puma_rk3399/fit_spl_atf.sh
@@ -0,0 +1,94 @@
+#!/bin/sh
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+#
+# Based on the board/sunxi/mksunxi_fit_atf.sh
+#
+# Script to generate FIT image source for 64-bit puma boards with
+# U-Boot proper, ATF, PMU firmware and devicetree.
+#
+# usage: $0 <dt_name> [<dt_name> [<dt_name] ...]
+
+[ -z "$BL31" ] && BL31="bl31.bin"
+
+if [ ! -f $BL31 ]; then
+ echo "WARNING: BL31 file $BL31 NOT found, resulting binary is non-functional" >&2
+ echo "Please read Building section in doc/README.rockchip" >&2
+ BL31=/dev/null
+fi
+
+[ -z "$PMUM0" ] && PMUM0="rk3399m0.bin"
+
+if [ ! -f $PMUM0 ]; then
+ echo "WARNING: PMUM0 file $PMUM0 NOT found, resulting binary is non-functional" >&2
+ echo "Please read Building section in doc/README.rockchip" >&2
+ PMUM0=/dev/null
+fi
+
+cat << __HEADER_EOF
+/* SPDX-License-Identifier: GPL-2.0+ OR X11 */
+/*
+ * Copyright (C) 2017 Theobroma Systems Design und Consulting GmbH
+ *
+ * Minimal dts for a SPL FIT image payload.
+ */
+
+/dts-v1/;
+
+/ {
+ description = "FIT image with U-Boot proper, ATF bl31, M0 Firmware, DTB";
+ #address-cells = <1>;
+
+ images {
+ uboot {
+ description = "U-Boot (64-bit)";
+ data = /incbin/("u-boot-nodtb.bin");
+ type = "standalone";
+ arch = "arm64";
+ compression = "none";
+ load = <0x4a000000>;
+ };
+ atf {
+ description = "ARM Trusted Firmware";
+ data = /incbin/("$BL31");
+ type = "firmware";
+ arch = "arm64";
+ os = "arm-trusted-firmware";
+ compression = "none";
+ load = <0x1000>;
+ entry = <0x1000>;
+ };
+ pmu {
+ description = "Cortex-M0 firmware";
+ data = /incbin/("$PMUM0");
+ type = "pmu-firmware";
+ compression = "none";
+ load = <0x180000>;
+ };
+ fdt {
+ description = "RK3399-Q7 (Puma) flat device-tree";
+ data = /incbin/("u-boot.dtb");
+ type = "flat_dt";
+ compression = "none";
+ };
+__HEADER_EOF
+
+cat << __CONF_HEADER_EOF
+ };
+
+ configurations {
+ default = "conf";
+ conf {
+ description = "Theobroma Systems RK3399-Q7 (Puma) SoM";
+ firmware = "atf";
+ loadables = "uboot", "pmu";
+ fdt = "fdt";
+ };
+__CONF_HEADER_EOF
+
+cat << __ITS_EOF
+ };
+};
+__ITS_EOF
diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig
index 03f0bfdb59..ebc78fb216 100644
--- a/configs/puma-rk3399_defconfig
+++ b/configs/puma-rk3399_defconfig
@@ -15,7 +15,7 @@ CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DEBUG_UART=y
-CONFIG_SPL_FIT_SOURCE="board/theobroma-systems/puma_rk3399/fit_spl_atf.its"
+CONFIG_SPL_FIT_GENERATOR="board/theobroma-systems/puma_rk3399/fit_spl_atf.sh"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-puma-haikou.dtb"
CONFIG_MISC_INIT_R=y
# CONFIG_DISPLAY_CPUINFO is not set
diff --git a/doc/README.rockchip b/doc/README.rockchip
index 5680c075fa..0ee54cd00e 100644
--- a/doc/README.rockchip
+++ b/doc/README.rockchip
@@ -137,8 +137,8 @@ For example:
=> cd arm-trusted-firmware
=> make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399 bl31
- (copy bl31.bin into U-Boot root dir)
- => cp build/rk3399/release/bl31/bl31.bin /path/to/u-boot/bl31-rk3399.bin
+ (export bl31.bin)
+ => export BL31=/path/to/arm-trusted-firmware/build/rk3399/release/bl31/bl31.bin
For rest of rk3399 boards.
@@ -162,8 +162,8 @@ For example:
(export cross compiler path for Cortex-M0 PMU)
=> make CROSS_COMPILE=arm-cortex_m0-eabi-
- (copy rk3399m0.bin into U-Boot root dir)
- => cp rk3399m0.bin /path/to/u-boot
+ (export rk3399m0.bin)
+ => export PMUM0=/path/to/rk3399-cortex-m0/rk3399m0.bin
- Compile U-Boot
--
2.18.0.321.gffc6fa0e3
next prev parent reply other threads:[~2019-06-20 10:07 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-20 10:07 [U-Boot] [PATCH v4 0/6] rockchip: rk3399: Make u-boot.itb as BUILD_TARGET Jagan Teki
2019-06-20 10:07 ` [U-Boot] [PATCH v4 1/6] Makefile: clean image.map Jagan Teki
2019-06-20 10:07 ` [U-Boot] [PATCH v4 2/6] Makefile: clean bl31_*.bin Jagan Teki
2019-06-20 10:07 ` [U-Boot] [PATCH v4 3/6] travis.yml: Add pyelftools install entry Jagan Teki
2019-06-20 10:07 ` [U-Boot] [PATCH v4 4/6] rockchip: rk3399: Get bl31.elf via BL31 Jagan Teki
2019-06-21 9:38 ` Kever Yang
2019-06-20 10:07 ` Jagan Teki [this message]
2019-06-21 9:39 ` [U-Boot] [PATCH v4 5/6] board: puma: Get bl31.bin via BL31 and rk3399m0.bin via PMUM0 Kever Yang
2019-06-20 10:07 ` [U-Boot] [PATCH v4 6/6] Kconfig: Add u-boot.itb BUILD_TARGET for Rockchip Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190620100740.6560-6-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox