[U-Boot] [PATCH] usb: ehci-mx5: Fix bus enumeration for DM case

[Lukasz Majewski <lukma@denx.de>]

On Thu, 20 Jun 2019 22:53:58 +0200
Marek Vasut <marex@denx.de> wrote:

> It is likely that the DM conversion of EHCI iMX5 driver was a
> derivative of EHCI VF, however the conversion is incomplete and is
> missing the bind workaround, which updates dev->seq number. Without
> this, all controllers have dev->seq number 0 . Add this bind
> workaround into EHCI iMX5 driver as well.
> 
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Abel Vesa <abel.vesa@nxp.com>
> Cc: Adam Ford <aford173@gmail.com>
> Cc: Fabio Estevam <festevam@gmail.com>
> Cc: Ludwig Zenz <lzenz@dh-electronics.com>
> Cc: Peng Fan <peng.fan@nxp.com>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Vagrant Cascadian <vagrant@debian.org>
> ---
>  drivers/usb/host/ehci-mx5.c | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 
> diff --git a/drivers/usb/host/ehci-mx5.c b/drivers/usb/host/ehci-mx5.c
> index 0b32728c57..4db513f4e5 100644
> --- a/drivers/usb/host/ehci-mx5.c
> +++ b/drivers/usb/host/ehci-mx5.c
> @@ -301,6 +301,22 @@ static int ehci_usb_ofdata_to_platdata(struct
> udevice *dev) return 0;
>  }
>  
> +static int ehci_usb_bind(struct udevice *dev)
> +{
> +	static int num_controllers;
> +
> +	/*
> +	 * Without this hack, if we return ENODEV for USB Controller
> 0, on
> +	 * probe for the next controller, USB Controller 1 will be
> given a
> +	 * sequence number of 0. This conflicts with our requirement
> of
> +	 * sequence numbers while initialising the peripherals.
> +	 */
> +	dev->req_seq = num_controllers;
> +	num_controllers++;
> +
> +	return 0;
> +}
> +
>  static int ehci_usb_probe(struct udevice *dev)
>  {
>  	struct usb_platdata *plat = dev_get_platdata(dev);
> @@ -362,6 +378,7 @@ U_BOOT_DRIVER(usb_mx5) = {
>  	.id	= UCLASS_USB,
>  	.of_match = mx5_usb_ids,
>  	.ofdata_to_platdata = ehci_usb_ofdata_to_platdata,
> +	.bind	= ehci_usb_bind,
>  	.probe	= ehci_usb_probe,
>  	.remove = ehci_deregister,
>  	.ops	= &ehci_usb_ops,

Tested-by: Lukasz Majewski <lukma@denx.de>

Tested on HSC|DDC i.MX53 board (usb start works as previously).

master branch
SHA1:  77f6e2dd0551d8a825bab391a1bd6b838874bcd4

Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190624/f54a18c2/attachment.sig>