[U-Boot] [PATCH 5/5] net: fec_mxc: Update driver to use full clks for iMX8

[Lukasz Majewski <lukma@denx.de>]

Hi Ye,

> Add support for more clocks used by iMX8 from DTB:
> ref_clock, tx_2x_clock, ahb_clock
> And update get clock rate interface to support multiple fec ports.
> 
> Signed-off-by: Ye Li <ye.li@nxp.com>
> ---
>  drivers/net/fec_mxc.c | 47
> ++++++++++++++++++++++++++++++++++++++--------- drivers/net/fec_mxc.h
> |  1 + 2 files changed, 39 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
> index d7c0809..6d485f1 100644
> --- a/drivers/net/fec_mxc.c
> +++ b/drivers/net/fec_mxc.c
> @@ -6,7 +6,6 @@
>   * (C) Copyright 2007 Pengutronix, Sascha Hauer
> <s.hauer@pengutronix.de>
>   * (C) Copyright 2007 Pengutronix, Juergen Beisert
> <j.beisert@pengutronix.de> */
> -
>  #include <common.h>
>  #include <dm.h>
>  #include <environment.h>
> @@ -132,9 +131,9 @@ static int fec_get_clk_rate(void *udev, int idx)
>  
>  	dev = udev;
>  	if (!dev) {
> -		ret = uclass_get_device(UCLASS_ETH, idx, &dev);
> +		ret = uclass_get_device_by_seq(UCLASS_ETH, idx,
> &dev); if (ret < 0) {
> -			debug("Can't get FEC udev: %d\n", ret);
> +			debug("Can't get FEC udev%d: %d\n", idx,
> ret); return ret;
>  		}
>  	}
> @@ -149,7 +148,7 @@ static int fec_get_clk_rate(void *udev, int idx)
>  #endif
>  }
>  
> -static void fec_mii_setspeed(struct ethernet_regs *eth)
> +static void fec_mii_setspeed(struct ethernet_regs *eth, int idx)
>  {
>  	/*
>  	 * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
> @@ -171,7 +170,7 @@ static void fec_mii_setspeed(struct ethernet_regs
> *eth) u32 hold;
>  	int ret;
>  
> -	ret = fec_get_clk_rate(NULL, 0);
> +	ret = fec_get_clk_rate(NULL, idx);
>  	if (ret < 0) {
>  		printf("Can't find FEC0 clk rate: %d\n", ret);
>  		return;
> @@ -593,7 +592,7 @@ static int fec_init(struct eth_device *dev, bd_t
> *bd) fec_reg_setup(fec);
>  
>  	if (fec->xcv_type != SEVENWIRE)
> -		fec_mii_setspeed(fec->bus->priv);
> +		fec_mii_setspeed(fec->bus->priv, fec->dev_id);
>  
>  	/* Set Opcode/Pause Duration Register */
>  	writel(0x00010020, &fec->eth->op_pause);	/* FIXME
> 0xffff0020; */ @@ -1073,7 +1072,7 @@ struct mii_dev
> *fec_get_miibus(ulong base_addr, int dev_id) free(bus);
>  		return NULL;
>  	}
> -	fec_mii_setspeed(eth);
> +	fec_mii_setspeed(eth, dev_id);
>  	return bus;
>  }
>  
> @@ -1142,7 +1141,7 @@ static int fec_probe(bd_t *bd, int dev_id,
> uint32_t base_addr, fec_set_dev_name(edev->name, dev_id);
>  	fec->dev_id = (dev_id == -1) ? 0 : dev_id;
>  	fec->bus = bus;
> -	fec_mii_setspeed(bus->priv);
> +	fec_mii_setspeed(bus->priv, fec->dev_id);
>  #ifdef CONFIG_PHYLIB
>  	fec->phydev = phydev;
>  	phy_connect_dev(phydev, edev);
> @@ -1324,6 +1323,7 @@ static int fecmxc_probe(struct udevice *dev)
>  	int ret;
>  
>  	if (IS_ENABLED(CONFIG_IMX8)) {
> +		struct clk ref_clk, clk_2x_txclk;
>  		ret = clk_get_by_name(dev, "ipg", &priv->ipg_clk);
>  		if (ret < 0) {
>  			debug("Can't get FEC ipg clk: %d\n", ret);
> @@ -1335,6 +1335,35 @@ static int fecmxc_probe(struct udevice *dev)
>  			return ret;
>  		}
>  
> +		ret = clk_get_by_name(dev, "ahb", &priv->ahb_clk);
> +		if (ret < 0) {
> +			debug("Can't get FEC ahb clk: %d\n", ret);
> +			return ret;
> +		}
> +		ret = clk_enable(&priv->ahb_clk);
> +		if (ret < 0) {
> +			debug("Can't enable FEC ahb clk: %d\n", ret);
> +			return ret;
> +		}
> +
> +		ret = clk_get_by_name(dev, "enet_clk_ref", &ref_clk);

The enet clock is not only IMX8 specific.

> +		if (ret >= 0) {
> +			ret = clk_enable(&ref_clk);
> +			if (ret < 0) {
> +				debug("Can't enable FEC ref clk:
> %d\n", ret);
> +				return ret;
> +			}
> +		}
> +
> +		ret = clk_get_by_name(dev, "enet_2x_txclk",
> &clk_2x_txclk);
> +		if (ret >= 0) {
> +			ret = clk_enable(&clk_2x_txclk);
> +			if (ret < 0) {
> +				debug("Can't enable FEC 2x_tx clk:
> %d\n", ret);
> +				return ret;
> +			}
> +		}
> +
>  		priv->clk_rate = clk_get_rate(&priv->ipg_clk);
>  	}
>  
> @@ -1368,7 +1397,6 @@ static int fecmxc_probe(struct udevice *dev)
>  	}
>  
>  	fec_reg_setup(priv);
> -
>  	priv->dev_id = dev->seq;
>  #ifdef CONFIG_FEC_MXC_MDIO_BASE
>  	bus = fec_get_miibus((ulong)CONFIG_FEC_MXC_MDIO_BASE,
> dev->seq); @@ -1492,6 +1520,7 @@ static const struct udevice_id
> fecmxc_ids[] = { { .compatible = "fsl,imx53-fec" },
>  	{ .compatible = "fsl,imx7d-fec" },
>  	{ .compatible = "fsl,mvf600-fec" },
> +	{ .compatible = "fsl,imx8qm-fec" },

Could you check if this patch doesn't break existing i.MX53, i.MX6q
(mx53, mx6, mx7) by using buildman ?

https://github.com/dsd/u-boot/tree/master/tools/buildman

>  	{ }
>  };
>  
> diff --git a/drivers/net/fec_mxc.h b/drivers/net/fec_mxc.h
> index e5f2dd7..23180a6 100644
> --- a/drivers/net/fec_mxc.h
> +++ b/drivers/net/fec_mxc.h
> @@ -264,6 +264,7 @@ struct fec_priv {
>  	u32 interface;
>  #endif
>  	struct clk ipg_clk;
> +	struct clk ahb_clk;
>  	u32 clk_rate;
>  };
>  




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190707/539fa63f/attachment.sig>