From: Lukasz Majewski <lukma@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 00/52] Support i.MX8MM/N
Date: Mon, 8 Jul 2019 09:24:47 +0200 [thread overview]
Message-ID: <20190708092447.03d567c4@jawa> (raw)
In-Reply-To: <AM0PR04MB4481B87A11D237F0D284D8A388F60@AM0PR04MB4481.eurprd04.prod.outlook.com>
Hi Peng,
> > Subject: Re: [U-Boot] [PATCH 00/52] Support i.MX8MM/N
> >
> > Hi Peng,
> >
> > > From: Peng Fan <peng.fan@nxp.com>
> > >
> > > This patchset is to support i.MX8MM/8MN with some update in ddr
> > > settings and ddr driver update.
> > >
> > > The initial patchset to support i.MX8MM is
> > > https://patchwork.ozlabs.org/cover/1093140/
> > > But in this patchset I dropped CCF, and use original CLK uclass,
> > > so not use V2 in patchset.
> >
> > I'm a bit confused here regarding the CCF adoption.
> >
> > From this patch set I do see that in one place you enable
> > CONFIG_CLK_CCF and CONFIG_SPL_CLK_CCF and then it is removed in the
> > other patch. For example the patch 48/52 extends the
> > drivers/clk/imx/clk-imx8mm.c, which looks like the old approach for
> > the clocking.
>
> The v2 patchset has cleanup
> https://github.com/MrVan/u-boot/tree/8m-7-5
>
> >
> > Am I correct that the v2 of this patch set will use the CCF v5,
> > which I've sent some time ago (CCF v4 was used on some i.MX8 SoC
> > though)?
>
> No. I tried CCF on i.MX8MM in previous patchset, but I dropped it for
> now.
If I may ask - why have you dropped it?
The v5 of CCF has been posted ~2 weeks ago (with you on CC) with a high
chance to be pulled by Stefano after the merge window opens.
When we accept the "legacy" clock approach we will stuck with it for a
long time.
What approach is took by the Linux kernel? CCF or any other one?
> We might try to switch to CCF again in future,
I'm a bit skeptical about such statements. It never works like that -
after it is accepted it would become a "legacy code which we do need
to preserve".
> but we hope
> i.MX8MM/N support could land in upstream soon. It has been pending
> for months.
Was the CCF the reason for the i.MX8 not being pulled for so long?
>
> Regards,
> Peng.
>
> >
> > >
> > > Bai Ping (1):
> > > imx8mq: Update the ddrc QoS setting for B1 chip
> > >
> > > Jacky Bai (2):
> > > driver: ddr: Refine the ddr init driver on imx8m
> > > ddr: imx8m: Fix the ddr init hang on imx8mq
> > >
> > > Peng Fan (47):
> > > linux: compat: guard PAGE_SIZE
> > > dm: clk: ignore default settings when node not valid
> > > pinctrl: imx: use devfdt_get_addr_size_index
> > > i2c: mxc: add CONFIG_CLK support
> > > tools: imx8m_image: align spl bin image size
> > > ddr: imx8m: fix ddr firmware location when enable SPL OF
> > > tools: imx8mimage: fix HDMI/FIT parsing
> > > imx8m: add image cfg for i.MX8MM lpddr4
> > > imx: add IMX8MQ kconfig entry
> > > imx: add IMX8MM kconfig entry
> > > imx: imx8mm: add clock bindings header
> > > imx: add i.MX8MM cpu type
> > > imx: spl: add spl_board_boot_device for i.MX8MM
> > > imx8m: update imx-regs for i.MX8MM
> > > imx: add get_cpu_rev support for i.MX8MM
> > > imx8m: rename clock to clock_imx8mq
> > > imx8m: restructure clock.h
> > > imx8m: add clk support for i.MX8MM
> > > imx8m: soc: probe clk before relocation
> > > imx8m: add pin header for i.MX8MM
> > > imx: add i.MX8MM PE property
> > > imx8m: Fix MMU table issue for OPTEE memory
> > > imx8m: set BYPASS ID SWAP to avoid AXI bus errors
> > > imx8m: soc: enable SCTR clock before timer init
> > > serial: Kconfig: make MXC_UART usable for MX7 and IMX8M
> > > clk: imx: add Kconfig entry for i.MX8MM
> > > clk: imx: add i.MX8MM clk driver
> > > imx: add i.MX8MM EVK board support
> > > imx: add i.MX8MN kconfig entry
> > > imx8mn: support get_cpu_rev
> > > imx8m: add clk support for i.MX8MN
> > > imx8mn: set BYPASS ID SWAP to avoid AXI bus errors
> > > imx: add i.MX8MN PE property
> > > imx8mn: add pin header
> > > imx: spl: use spl_board_boot_device for i.MX8MN
> > > spl: pass args to board_return_to_bootrom
> > > imx: add rom api support
> > > imx: cpu: restrict get_boot_device
> > > imx8mn: add get_boot_device
> > > power: pmic: add SPL_DM_PMIC
> > > tools: imx8mimage: add ROM VERSION
> > > pinctrl: imx8m: support i.MX8MN
> > > tools: imx8m_image: support ddr4 firmware
> > > clk: imx: add i.MX8MN clk support
> > > imx8m: add i.MX8MN ddr4 image cfg file
> > > imx: add dtsi for i.MX8MN
> > > imx: add i.MX8MN DDR4 board support
> > >
> > > Ye Li (2):
> > > imx8m: Configure trustzone region 0 for non-secure access
> > > ddr: imx8m: Fix ddr4 driver build issue
> > >
> > > arch/arm/dts/Makefile | 4 +-
> > > arch/arm/dts/imx8mm-evk-u-boot.dtsi | 92 +
> > > arch/arm/dts/imx8mm-evk.dts | 235 +++
> > > arch/arm/dts/imx8mm-pinfunc.h | 629
> > +++++++
> > > arch/arm/dts/imx8mm.dtsi | 733
> > ++++++++
> > > arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi | 92 +
> > > arch/arm/dts/imx8mn-ddr4-evk.dts | 221 +++
> > > arch/arm/dts/imx8mn-pinfunc.h | 646
> > +++++++
> > > arch/arm/dts/imx8mn.dtsi | 712
> > +++++++
> > > arch/arm/include/asm/arch-imx/cpu.h | 7 +
> > > arch/arm/include/asm/arch-imx8m/clock.h | 494 +----
> > > arch/arm/include/asm/arch-imx8m/clock_imx8mm.h | 465
> > +++++
> > > arch/arm/include/asm/arch-imx8m/clock_imx8mq.h | 424 +++++
> > > arch/arm/include/asm/arch-imx8m/imx-regs.h | 75 +-
> > > arch/arm/include/asm/arch-imx8m/imx8mm_pins.h | 691
> > +++++++
> > > arch/arm/include/asm/arch-imx8m/imx8mn_pins.h | 763
> > ++++++++
> > > arch/arm/include/asm/mach-imx/iomux-v3.h | 4 +
> > > arch/arm/include/asm/mach-imx/mxc_i2c.h | 2 +
> > > arch/arm/include/asm/mach-imx/sys_proto.h | 42 +
> > > arch/arm/mach-imx/Kconfig | 4 +
> > > arch/arm/mach-imx/Makefile | 2 +
> > > arch/arm/mach-imx/cpu.c | 16 +-
> > > arch/arm/mach-imx/imx8m/Kconfig | 28 +-
> > > arch/arm/mach-imx/imx8m/Makefile | 4 +-
> > > arch/arm/mach-imx/imx8m/clock_imx8mm.c | 707
> > +++++++
> > > .../arm/mach-imx/imx8m/{clock.c => clock_imx8mq.c} | 7 +-
> > > arch/arm/mach-imx/imx8m/clock_slice.c | 815
> > ++++++++
> > > arch/arm/mach-imx/imx8m/imximage-8mm-lpddr4.cfg | 16 +
> > > arch/arm/mach-imx/imx8m/imximage-8mn-ddr4.cfg | 17 +
> > > arch/arm/mach-imx/imx8m/soc.c | 162 +-
> > > arch/arm/mach-imx/spl.c | 8 +
> > > arch/arm/mach-imx/spl_imx_romapi.c | 292 +++
> > > arch/arm/mach-rockchip/rk3288-board-tpl.c | 5 +-
> > > arch/arm/mach-rockchip/rk3368-board-tpl.c | 5 +-
> > > arch/arm/mach-rockchip/rk3399-board-spl.c | 5 +-
> > > arch/arm/mach-rockchip/rk3399-board-tpl.c | 5 +-
> > > board/freescale/imx8mm_evk/Kconfig | 12 +
> > > board/freescale/imx8mm_evk/MAINTAINERS | 6 +
> > > board/freescale/imx8mm_evk/Makefile | 12 +
> > > board/freescale/imx8mm_evk/imx8mm_evk.c | 90 +
> > > board/freescale/imx8mm_evk/lpddr4_timing.c | 1980
> > > ++++++++++++++++++++
> > > board/freescale/imx8mm_evk/spl.c | 216 +++
> > > board/freescale/imx8mn_evk/Kconfig | 14 +
> > > board/freescale/imx8mn_evk/MAINTAINERS | 6 +
> > > board/freescale/imx8mn_evk/Makefile | 12 +
> > > board/freescale/imx8mn_evk/ddr4_timing.c | 1214
> > > ++++++++++++ board/freescale/imx8mn_evk/imx8mn_evk.c
> > |
> > > 85 + board/freescale/imx8mn_evk/spl.c | 91 +
> > > board/freescale/imx8mq_evk/lpddr4_timing.c | 16 +-
> > > common/spl/spl_bootrom.c | 7 +-
> > > configs/imx8mm_evk_defconfig | 51 +
> > > configs/imx8mn_ddr4_evk_defconfig | 55 +
> > > drivers/clk/clk-uclass.c | 3 +
> > > drivers/clk/imx/Kconfig | 14 +
> > > drivers/clk/imx/Makefile | 1 +
> > > drivers/clk/imx/clk-imx8mm.c | 121 ++
> > > drivers/ddr/imx/imx8m/Kconfig | 6 +
> > > drivers/ddr/imx/imx8m/Makefile | 4 +-
> > > drivers/ddr/imx/imx8m/ddr4_init.c | 113 --
> > > drivers/ddr/imx/imx8m/ddr_init.c | 168 ++
> > > drivers/ddr/imx/imx8m/ddrphy_utils.c | 4 +
> > > drivers/ddr/imx/imx8m/helper.c | 22 +-
> > > drivers/ddr/imx/imx8m/lpddr4_init.c | 188 --
> > > drivers/i2c/mxc_i2c.c | 24 +-
> > > drivers/pinctrl/nxp/pinctrl-imx.c | 4 +-
> > > drivers/pinctrl/nxp/pinctrl-imx8m.c | 1 +
> > > drivers/power/pmic/Kconfig | 12 +
> > > drivers/power/pmic/Makefile | 2 +-
> > > drivers/serial/Kconfig | 2 +-
> > > include/configs/imx8mm_evk.h | 200 ++
> > > include/configs/imx8mn_evk.h | 198 ++
> > > include/dt-bindings/clock/imx8mm-clock.h | 244 +++
> > > include/dt-bindings/clock/imx8mn-clock.h | 215 +++
> > > include/imximage.h | 1 +
> > > include/linux/compat.h | 2 +
> > > include/power/pmic.h | 2 +-
> > > include/spl.h | 3 +-
> > > tools/imx8m_image.sh | 15 +-
> > > tools/imx8mimage.c | 31 +- 79
> > files
> > > changed, 13082 insertions(+), 814 deletions(-) create mode 100644
> > > arch/arm/dts/imx8mm-evk-u-boot.dtsi create mode 100644
> > > arch/arm/dts/imx8mm-evk.dts create mode 100644
> > > arch/arm/dts/imx8mm-pinfunc.h create mode 100644
> > > arch/arm/dts/imx8mm.dtsi create mode 100644
> > > arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi create mode 100644
> > > arch/arm/dts/imx8mn-ddr4-evk.dts create mode 100644
> > > arch/arm/dts/imx8mn-pinfunc.h create mode 100644
> > > arch/arm/dts/imx8mn.dtsi create mode 100644
> > > arch/arm/include/asm/arch-imx8m/clock_imx8mm.h create mode 100644
> > > arch/arm/include/asm/arch-imx8m/clock_imx8mq.h create mode 100644
> > > arch/arm/include/asm/arch-imx8m/imx8mm_pins.h create mode 100644
> > > arch/arm/include/asm/arch-imx8m/imx8mn_pins.h create mode 100644
> > > arch/arm/mach-imx/imx8m/clock_imx8mm.c rename
> > > arch/arm/mach-imx/imx8m/{clock.c => clock_imx8mq.c} (99%) create
> > mode
> > > 100644 arch/arm/mach-imx/imx8m/imximage-8mm-lpddr4.cfg create
> > mode
> > > 100644 arch/arm/mach-imx/imx8m/imximage-8mn-ddr4.cfg create mode
> > > 100644 arch/arm/mach-imx/spl_imx_romapi.c create mode 100644
> > > board/freescale/imx8mm_evk/Kconfig create mode 100644
> > > board/freescale/imx8mm_evk/MAINTAINERS create mode 100644
> > > board/freescale/imx8mm_evk/Makefile create mode 100644
> > > board/freescale/imx8mm_evk/imx8mm_evk.c create mode 100644
> > > board/freescale/imx8mm_evk/lpddr4_timing.c create mode 100644
> > > board/freescale/imx8mm_evk/spl.c create mode 100644
> > > board/freescale/imx8mn_evk/Kconfig create mode 100644
> > > board/freescale/imx8mn_evk/MAINTAINERS create mode 100644
> > > board/freescale/imx8mn_evk/Makefile create mode 100644
> > > board/freescale/imx8mn_evk/ddr4_timing.c create mode 100644
> > > board/freescale/imx8mn_evk/imx8mn_evk.c create mode 100644
> > > board/freescale/imx8mn_evk/spl.c create mode 100644
> > > configs/imx8mm_evk_defconfig create mode 100644
> > > configs/imx8mn_ddr4_evk_defconfig create mode 100644
> > > drivers/clk/imx/clk-imx8mm.c delete mode 100644
> > > drivers/ddr/imx/imx8m/ddr4_init.c create mode 100644
> > > drivers/ddr/imx/imx8m/ddr_init.c delete mode 100644
> > > drivers/ddr/imx/imx8m/lpddr4_init.c create mode 100644
> > > include/configs/imx8mm_evk.h create mode 100644
> > > include/configs/imx8mn_evk.h create mode 100644
> > > include/dt-bindings/clock/imx8mm-clock.h create mode 100644
> > > include/dt-bindings/clock/imx8mn-clock.h
> > >
> >
> >
> >
> >
> > Best regards,
> >
> > Lukasz Majewski
> >
> > --
> >
> > DENX Software Engineering GmbH, Managing Director: Wolfgang
> > Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell,
> > Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email:
> > lukma at denx.de
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190708/5c2c6e63/attachment.sig>
next prev parent reply other threads:[~2019-07-08 7:24 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-02 2:31 [U-Boot] [PATCH 00/52] Support i.MX8MM/N peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 01/52] linux: compat: guard PAGE_SIZE peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 02/52] dm: clk: ignore default settings when node not valid peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 03/52] pinctrl: imx: use devfdt_get_addr_size_index peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 04/52] i2c: mxc: add CONFIG_CLK support peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 05/52] tools: imx8m_image: align spl bin image size peng.fan at nxp.com
2019-07-04 15:33 ` Schrempf Frieder
2019-07-05 2:06 ` Peng Fan
2019-07-02 2:31 ` [U-Boot] [PATCH 06/52] ddr: imx8m: fix ddr firmware location when enable SPL OF peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 07/52] tools: imx8mimage: fix HDMI/FIT parsing peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 08/52] imx8m: add image cfg for i.MX8MM lpddr4 peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 09/52] imx: add IMX8MQ kconfig entry peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 10/52] imx: add IMX8MM " peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 11/52] imx: imx8mm: add clock bindings header peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 12/52] imx: add i.MX8MM cpu type peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 13/52] imx: spl: add spl_board_boot_device for i.MX8MM peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 14/52] imx8m: update imx-regs " peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 15/52] imx: add get_cpu_rev support " peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 16/52] imx8m: rename clock to clock_imx8mq peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 17/52] imx8m: restructure clock.h peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 18/52] imx8m: add clk support for i.MX8MM peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 19/52] imx8m: soc: probe clk before relocation peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 20/52] imx8m: add pin header for i.MX8MM peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 21/52] imx: add i.MX8MM PE property peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 22/52] imx8m: Fix MMU table issue for OPTEE memory peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 23/52] imx8m: set BYPASS ID SWAP to avoid AXI bus errors peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 24/52] imx8m: Configure trustzone region 0 for non-secure access peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 25/52] imx8m: soc: enable SCTR clock before timer init peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 26/52] serial: Kconfig: make MXC_UART usable for MX7 and IMX8M peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 27/52] clk: imx: add Kconfig entry for i.MX8MM peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 28/52] clk: imx: add i.MX8MM clk driver peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 29/52] imx: add i.MX8MM EVK board support peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 30/52] ddr: imx8m: Fix ddr4 driver build issue peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 31/52] imx8mq: Update the ddrc QoS setting for B1 chip peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 32/52] driver: ddr: Refine the ddr init driver on imx8m peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 33/52] ddr: imx8m: Fix the ddr init hang on imx8mq peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 34/52] imx: add i.MX8MN kconfig entry peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 35/52] imx8mn: support get_cpu_rev peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 36/52] imx8m: add clk support for i.MX8MN peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 37/52] imx8mn: set BYPASS ID SWAP to avoid AXI bus errors peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 38/52] imx: add i.MX8MN PE property peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 39/52] imx8mn: add pin header peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 40/52] imx: spl: use spl_board_boot_device for i.MX8MN peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 41/52] spl: pass args to board_return_to_bootrom peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 42/52] imx: add rom api support peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 43/52] imx: cpu: restrict get_boot_device peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 44/52] imx8mn: add get_boot_device peng.fan at nxp.com
2019-07-02 2:31 ` [U-Boot] [PATCH 45/52] power: pmic: add SPL_DM_PMIC peng.fan at nxp.com
2019-07-02 2:32 ` [U-Boot] [PATCH 46/52] tools: imx8mimage: add ROM VERSION peng.fan at nxp.com
2019-07-02 2:32 ` [U-Boot] [PATCH 47/52] pinctrl: imx8m: support i.MX8MN peng.fan at nxp.com
2019-07-02 2:32 ` [U-Boot] [PATCH 48/52] tools: imx8m_image: support ddr4 firmware peng.fan at nxp.com
2019-07-02 2:32 ` [U-Boot] [PATCH 49/52] clk: imx: add i.MX8MN clk support peng.fan at nxp.com
2019-07-02 2:32 ` [U-Boot] [PATCH 50/52] imx8m: add i.MX8MN ddr4 image cfg file peng.fan at nxp.com
2019-07-02 2:32 ` [U-Boot] [PATCH 51/52] imx: add dtsi for i.MX8MN peng.fan at nxp.com
2019-07-02 2:32 ` [U-Boot] [PATCH 52/52] imx: add i.MX8MN DDR4 board support peng.fan at nxp.com
2019-07-06 22:45 ` [U-Boot] [PATCH 00/52] Support i.MX8MM/N Lukasz Majewski
2019-07-08 1:28 ` Peng Fan
2019-07-08 7:24 ` Lukasz Majewski [this message]
2019-07-08 7:47 ` Peng Fan
2019-07-08 8:15 ` Lukasz Majewski
2019-07-08 8:37 ` Peng Fan
2019-07-17 8:37 ` Peng Fan
2019-07-18 7:12 ` Lukasz Majewski
2019-07-22 21:55 ` Lukasz Majewski
2019-07-23 2:39 ` Peng Fan
2019-07-23 3:16 ` Peng Fan
2019-07-18 14:34 ` Schrempf Frieder
2019-07-19 1:51 ` Peng Fan
2019-07-08 8:41 ` Schrempf Frieder
2019-07-08 8:53 ` Peng Fan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190708092447.03d567c4@jawa \
--to=lukma@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox