From: Bartosz Golaszewski <brgl@bgdev.pl>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 03/14] sandbox: remove CONFIG_DM_I2C_COMPAT from defconfigs
Date: Tue, 9 Jul 2019 09:55:18 +0200 [thread overview]
Message-ID: <20190709075529.15423-4-brgl@bgdev.pl> (raw)
In-Reply-To: <20190709075529.15423-1-brgl@bgdev.pl>
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
There are no more "real" users of CONFIG_DM_I2C_COMPAT and we'll soon
remove it altogether. Stop building it in sandbox mode.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Heiko Schocher <hs@denx.de>
---
Makefile | 2 +-
configs/sandbox64_defconfig | 1 -
configs/sandbox_defconfig | 1 -
configs/sandbox_flattree_defconfig | 1 -
configs/sandbox_noblk_defconfig | 1 -
configs/sandbox_spl_defconfig | 1 -
configs/tools-only_defconfig | 1 -
7 files changed, 1 insertion(+), 7 deletions(-)
diff --git a/Makefile b/Makefile
index 516260f46d..1b7d893cd3 100644
--- a/Makefile
+++ b/Makefile
@@ -936,7 +936,7 @@ ifneq ($(CONFIG_DM_SPI)$(CONFIG_OF_CONTROL),yy)
endif
endif
endif
-ifeq ($(CONFIG_DM_I2C_COMPAT)$(CONFIG_SANDBOX),y)
+ifeq ($(CONFIG_DM_I2C_COMPAT),y)
@echo >&2 "===================== WARNING ======================"
@echo >&2 "This board uses CONFIG_DM_I2C_COMPAT. Please remove"
@echo >&2 "(possibly in a subsequent patch in your series)"
diff --git a/configs/sandbox64_defconfig b/configs/sandbox64_defconfig
index 29a9df8ab0..cfe7622a79 100644
--- a/configs/sandbox64_defconfig
+++ b/configs/sandbox64_defconfig
@@ -89,7 +89,6 @@ CONFIG_BOARD=y
CONFIG_BOARD_SANDBOX=y
CONFIG_PM8916_GPIO=y
CONFIG_SANDBOX_GPIO=y
-CONFIG_DM_I2C_COMPAT=y
CONFIG_I2C_CROS_EC_TUNNEL=y
CONFIG_I2C_CROS_EC_LDO=y
CONFIG_DM_I2C_GPIO=y
diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
index 6894262b89..97b071d3dd 100644
--- a/configs/sandbox_defconfig
+++ b/configs/sandbox_defconfig
@@ -104,7 +104,6 @@ CONFIG_PM8916_GPIO=y
CONFIG_SANDBOX_GPIO=y
CONFIG_DM_HWSPINLOCK=y
CONFIG_HWSPINLOCK_SANDBOX=y
-CONFIG_DM_I2C_COMPAT=y
CONFIG_I2C_CROS_EC_TUNNEL=y
CONFIG_I2C_CROS_EC_LDO=y
CONFIG_DM_I2C_GPIO=y
diff --git a/configs/sandbox_flattree_defconfig b/configs/sandbox_flattree_defconfig
index af335285c9..a574144cd9 100644
--- a/configs/sandbox_flattree_defconfig
+++ b/configs/sandbox_flattree_defconfig
@@ -74,7 +74,6 @@ CONFIG_BOARD=y
CONFIG_BOARD_SANDBOX=y
CONFIG_PM8916_GPIO=y
CONFIG_SANDBOX_GPIO=y
-CONFIG_DM_I2C_COMPAT=y
CONFIG_I2C_CROS_EC_TUNNEL=y
CONFIG_I2C_CROS_EC_LDO=y
CONFIG_DM_I2C_GPIO=y
diff --git a/configs/sandbox_noblk_defconfig b/configs/sandbox_noblk_defconfig
index da9229fc79..381bad2003 100644
--- a/configs/sandbox_noblk_defconfig
+++ b/configs/sandbox_noblk_defconfig
@@ -81,7 +81,6 @@ CONFIG_BOARD=y
CONFIG_BOARD_SANDBOX=y
CONFIG_PM8916_GPIO=y
CONFIG_SANDBOX_GPIO=y
-CONFIG_DM_I2C_COMPAT=y
CONFIG_I2C_CROS_EC_TUNNEL=y
CONFIG_I2C_CROS_EC_LDO=y
CONFIG_DM_I2C_GPIO=y
diff --git a/configs/sandbox_spl_defconfig b/configs/sandbox_spl_defconfig
index d355cc3f3b..2b6bc4c3d4 100644
--- a/configs/sandbox_spl_defconfig
+++ b/configs/sandbox_spl_defconfig
@@ -95,7 +95,6 @@ CONFIG_BOARD=y
CONFIG_BOARD_SANDBOX=y
CONFIG_PM8916_GPIO=y
CONFIG_SANDBOX_GPIO=y
-CONFIG_DM_I2C_COMPAT=y
CONFIG_I2C_CROS_EC_TUNNEL=y
CONFIG_I2C_CROS_EC_LDO=y
CONFIG_DM_I2C_GPIO=y
diff --git a/configs/tools-only_defconfig b/configs/tools-only_defconfig
index aa73661a92..4808b49850 100644
--- a/configs/tools-only_defconfig
+++ b/configs/tools-only_defconfig
@@ -12,7 +12,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sandbox"
CONFIG_IP_DEFRAG=y
# CONFIG_UDP_FUNCTION_FASTBOOT is not set
CONFIG_SANDBOX_GPIO=y
-CONFIG_DM_I2C_COMPAT=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_PCI_SANDBOX=y
--
2.21.0
next prev parent reply other threads:[~2019-07-09 7:55 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-09 7:55 [U-Boot] [PATCH 00/14] ARM: davinci: driver-model improvements Bartosz Golaszewski
2019-07-09 7:55 ` [U-Boot] [PATCH 01/14] net: davinci_emac: convert to using the driver model Bartosz Golaszewski
2019-07-10 11:48 ` Ramon Fried
2019-07-09 7:55 ` [U-Boot] [PATCH 02/14] davinci: remove CONFIG_DM_I2C_COMPAT from defconfigs Bartosz Golaszewski
2019-07-09 7:55 ` Bartosz Golaszewski [this message]
2019-07-09 7:55 ` [U-Boot] [PATCH 04/14] i2c: remove i2c driver-model compatibility layer Bartosz Golaszewski
2019-07-09 7:55 ` [U-Boot] [PATCH 05/14] omapl138_lcdk_defconfig: don't build support for SPI Bartosz Golaszewski
2019-07-09 7:55 ` [U-Boot] [PATCH 06/14] nand: davinci: make davinci_nand_init() static Bartosz Golaszewski
2019-07-09 7:55 ` [U-Boot] [PATCH 07/14] nand: davinci: add support for driver model Bartosz Golaszewski
2019-07-09 7:55 ` [U-Boot] [PATCH 08/14] davinci: omapl138-lcdk: enable driver model for NAND Bartosz Golaszewski
2019-07-09 7:55 ` [U-Boot] [PATCH 09/14] davinci: da850-evm: " Bartosz Golaszewski
2019-07-09 7:55 ` [U-Boot] [PATCH 10/14] davinci: omapl138-lcdk: enable SPL_SYS_MALLOC_SIMPLE Bartosz Golaszewski
2019-07-09 7:55 ` [U-Boot] [PATCH 11/14] davinci: omapl138-lcdk: enable CONFIG_USE_TINY_PRINTF Bartosz Golaszewski
2019-07-09 7:55 ` [U-Boot] [PATCH 12/14] davinci: omapl138-lcdk: remove unneeded includes Bartosz Golaszewski
2019-07-09 7:55 ` [U-Boot] [PATCH 13/14] davinci: omapl138-lcdk: enable driver-model in SPL Bartosz Golaszewski
2019-07-09 13:34 ` Adam Ford
2019-07-09 14:41 ` Bartosz Golaszewski
2019-07-09 14:46 ` Adam Ford
2019-07-09 7:55 ` [U-Boot] [PATCH 14/14] configs: omapl138_lcdk: enable NAND self-init " Bartosz Golaszewski
2019-07-22 6:17 ` [U-Boot] [PATCH 00/14] ARM: davinci: driver-model improvements Bartosz Golaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190709075529.15423-4-brgl@bgdev.pl \
--to=brgl@bgdev.pl \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox