From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jagan Teki Date: Tue, 16 Jul 2019 17:27:27 +0530 Subject: [U-Boot] [PATCH v3 39/57] ram: rk3399: Update lpddr4 mode_sel based on io settings In-Reply-To: <20190716115745.12585-1-jagan@amarulasolutions.com> References: <20190716115745.12585-1-jagan@amarulasolutions.com> Message-ID: <20190716115745.12585-40-jagan@amarulasolutions.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de The mode_sel on lpddr4 value is depending on IO settings of rd_vref. Add support for it. Signed-off-by: Jagan Teki Signed-off-by: YouMin Chen --- drivers/ram/rockchip/sdram_rk3399.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/ram/rockchip/sdram_rk3399.c b/drivers/ram/rockchip/sdram_rk3399.c index 4a2622a440..63763062f9 100644 --- a/drivers/ram/rockchip/sdram_rk3399.c +++ b/drivers/ram/rockchip/sdram_rk3399.c @@ -347,7 +347,7 @@ static int phy_io_config(const struct chan_info *chan, u32 drv_value, odt_value; u32 speed; - /* vref setting */ + /* vref setting & mode setting */ if (params->base.dramtype == LPDDR4) { struct io_setting *io = lpddr4_get_io_settings(params, mr5); u32 rd_vref = io->rd_vref * 1000; @@ -355,15 +355,18 @@ static int phy_io_config(const struct chan_info *chan, if (rd_vref < 36700) { /* MODE_LV[2:0] = LPDDR4 (Range 2)*/ vref_mode_dq = 0x7; + /* MODE[2:0]= LPDDR4 Range 2(0.4*VDDQ) */ + mode_sel = 0x5; vref_value_dq = (rd_vref - 3300) / 521; } else { /* MODE_LV[2:0] = LPDDR4 (Range 1)*/ vref_mode_dq = 0x6; + /* MODE[2:0]= LPDDR4 Range 1(0.33*VDDQ) */ + mode_sel = 0x4; vref_value_dq = (rd_vref - 15300) / 521; } vref_mode_ac = 0x6; vref_value_ac = 0x1f; - mode_sel = 0x6; } else if (params->base.dramtype == LPDDR3) { if (params->base.odt == 1) { vref_mode_dq = 0x5; /* LPDDR3 ODT */ -- 2.18.0.321.gffc6fa0e3