From: Vladimir Oltean <olteanv@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 3/9] net: tsec: Reverse Christmas tree notation
Date: Fri, 19 Jul 2019 00:29:55 +0300 [thread overview]
Message-ID: <20190718213001.24815-4-olteanv@gmail.com> (raw)
In-Reply-To: <20190718213001.24815-1-olteanv@gmail.com>
This is a cosmetic patch that reorders variable definitions in the
inverse order of their line length, where possible.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
---
Changes from v2:
None.
Changes from v1:
None.
drivers/net/tsec.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c
index 576398676af7..ce19ff9228fd 100644
--- a/drivers/net/tsec.c
+++ b/drivers/net/tsec.c
@@ -259,8 +259,8 @@ static int tsec_send(struct udevice *dev, void *packet, int length)
{
struct tsec_private *priv = (struct tsec_private *)dev->priv;
struct tsec __iomem *regs = priv->regs;
- u16 status;
int result = 0;
+ u16 status;
int i;
/* Find an empty buffer descriptor */
@@ -708,9 +708,9 @@ static int init_phy(struct tsec_private *priv)
*/
static int tsec_initialize(bd_t *bis, struct tsec_info_struct *tsec_info)
{
+ struct tsec_private *priv;
struct eth_device *dev;
int i;
- struct tsec_private *priv;
dev = (struct eth_device *)malloc(sizeof(*dev));
@@ -794,14 +794,14 @@ int tsec_standard_init(bd_t *bis)
#else /* CONFIG_DM_ETH */
int tsec_probe(struct udevice *dev)
{
- struct tsec_private *priv = dev_get_priv(dev);
struct eth_pdata *pdata = dev_get_platdata(dev);
- struct fsl_pq_mdio_info mdio_info;
+ struct tsec_private *priv = dev_get_priv(dev);
struct ofnode_phandle_args phandle_args;
u32 tbiaddr = CONFIG_SYS_TBIPA_VALUE;
- ofnode parent;
+ struct fsl_pq_mdio_info mdio_info;
const char *phy_mode;
fdt_addr_t reg;
+ ofnode parent;
int ret;
pdata->iobase = (phys_addr_t)dev_read_addr(dev);
--
2.17.1
next prev parent reply other threads:[~2019-07-18 21:29 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-18 21:29 [U-Boot] [PATCH v3 0/9] NXP LS1021A-TSN Board Vladimir Oltean
2019-07-18 21:29 ` [U-Boot] [PATCH v3 1/9] net: tsec: Refactor the readout of the tbi-handle property Vladimir Oltean
2019-07-25 18:42 ` [U-Boot] " Joe Hershberger
2019-07-18 21:29 ` [U-Boot] [PATCH v3 2/9] net: tsec: Fix offset of MDIO registers for DM_ETH Vladimir Oltean
2019-07-23 6:23 ` Bin Meng
2019-07-25 18:42 ` [U-Boot] " Joe Hershberger
2019-07-18 21:29 ` Vladimir Oltean [this message]
2019-07-25 18:42 ` [U-Boot] net: tsec: Reverse Christmas tree notation Joe Hershberger
2019-07-18 21:29 ` [U-Boot] [PATCH v3 4/9] net: tsec: Make errors visible Vladimir Oltean
2019-07-25 18:42 ` [U-Boot] " Joe Hershberger
2019-07-18 21:29 ` [U-Boot] [PATCH v3 5/9] net: tsec: Common handling of MAC station address for DM_ETH Vladimir Oltean
2019-07-25 18:42 ` [U-Boot] " Joe Hershberger
2019-07-18 21:29 ` [U-Boot] [PATCH v3 6/9] net: tsec: Change compatible strings to match Linux Vladimir Oltean
2019-07-23 3:30 ` Joe Hershberger
2019-07-25 18:42 ` [U-Boot] " Joe Hershberger
2019-07-18 21:29 ` [U-Boot] [PATCH v3 7/9] arm: ls1021atwr: Convert to use driver model TSEC driver Vladimir Oltean
2019-07-25 18:42 ` [U-Boot] " Joe Hershberger
2019-07-18 21:30 ` [U-Boot] [PATCH v3 8/9] configs: ls1021atwr: Fix distro_bootcmd for QSPI boot Vladimir Oltean
2019-07-23 3:31 ` Joe Hershberger
2019-07-25 18:42 ` [U-Boot] " Joe Hershberger
2019-07-18 21:30 ` [U-Boot] [PATCH v3 9/9] Add support for the NXP LS1021A-TSN board Vladimir Oltean
2019-07-23 3:35 ` Joe Hershberger
2019-07-23 6:25 ` Bin Meng
2019-07-25 18:42 ` [U-Boot] " Joe Hershberger
2019-07-25 20:30 ` Vladimir Oltean
2019-07-23 0:15 ` [U-Boot] [PATCH v3 0/9] NXP LS1021A-TSN Board Joe Hershberger
2019-07-23 6:07 ` Vladimir Oltean
2019-07-23 7:37 ` Joe Hershberger
2019-07-24 15:37 ` Vladimir Oltean
2019-07-24 18:56 ` Joe Hershberger
2019-07-24 20:54 ` Vladimir Oltean
2019-08-14 9:37 ` Prabhakar Kushwaha
2019-08-14 9:52 ` Vladimir Oltean
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190718213001.24815-4-olteanv@gmail.com \
--to=olteanv@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox