From: Bartosz Golaszewski <brgl@bgdev.pl>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 00/14] ARM: davinci: driver-model improvements
Date: Wed, 24 Jul 2019 10:12:06 +0200 [thread overview]
Message-ID: <20190724081220.12022-1-brgl@bgdev.pl> (raw)
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The following series contains all the patches for davinci that have
been sent to the mailing list recently rebased on top of v2019.07 and
retested on da850-lcdk and da850-evm. I collected all the review and
test tags too.
The first patch is the emac driver conversion to driver model. Patches
2-5 fix build warnings due to legacy interfaces usage. Patches 6-9 add
support for driver model to the davinci NAND driver. Patches 10-13
enable driver-model support in SPL for davinci. Last patch enables the
driver model for NAND in SPL.
These patches (except for the last, trivial one) have spent a lot of
time on the list and have been validated. I think they are ready to be
picked up for upstream.
v1 -> v2:
- fixed a build error on da850_am18xx due to missing CONFIG_DM_ETH=y
Bartosz Golaszewski (14):
net: davinci_emac: convert to using the driver model
davinci: remove CONFIG_DM_I2C_COMPAT from defconfigs
sandbox: remove CONFIG_DM_I2C_COMPAT from defconfigs
i2c: remove i2c driver-model compatibility layer
omapl138_lcdk_defconfig: don't build support for SPI
nand: davinci: make davinci_nand_init() static
nand: davinci: add support for driver model
davinci: omapl138-lcdk: enable driver model for NAND
davinci: da850-evm: enable driver model for NAND
davinci: omapl138-lcdk: enable SPL_SYS_MALLOC_SIMPLE
davinci: omapl138-lcdk: enable CONFIG_USE_TINY_PRINTF
davinci: omapl138-lcdk: remove unneeded includes
davinci: omapl138-lcdk: enable driver-model in SPL
configs: omapl138_lcdk: enable NAND self-init in SPL
Makefile | 7 -
arch/arm/dts/da850-evm-u-boot.dtsi | 4 +
arch/arm/dts/da850-lcdk-u-boot.dtsi | 4 +
arch/arm/include/asm/ti-common/davinci_nand.h | 2 -
arch/arm/mach-davinci/cpu.c | 13 --
arch/arm/mach-omap2/omap3/emac.c | 3 +-
board/davinci/da8xxevm/da850evm.c | 6 -
board/davinci/da8xxevm/omapl138_lcdk.c | 32 ++---
board/logicpd/am3517evm/am3517evm.c | 1 -
board/ti/ti816x/evm.c | 3 +-
configs/am3517_evm_defconfig | 1 +
configs/da850_am18xxevm_defconfig | 2 +-
configs/da850evm_defconfig | 2 +
configs/da850evm_direct_nor_defconfig | 2 +
configs/da850evm_nand_defconfig | 2 +
configs/omapl138_lcdk_defconfig | 16 ++-
configs/sandbox64_defconfig | 1 -
configs/sandbox_defconfig | 1 -
configs/sandbox_flattree_defconfig | 1 -
configs/sandbox_noblk_defconfig | 1 -
configs/sandbox_spl_defconfig | 1 -
configs/ti816x_evm_defconfig | 1 +
configs/tools-only_defconfig | 1 -
drivers/i2c/Kconfig | 13 +-
drivers/i2c/Makefile | 1 -
drivers/i2c/i2c-uclass-compat.c | 128 ------------------
drivers/mtd/nand/raw/davinci_nand.c | 48 ++++++-
drivers/net/ti/davinci_emac.c | 77 ++++++-----
include/_exports.h | 3 +-
include/configs/am3517_evm.h | 1 -
include/configs/da850evm.h | 12 +-
include/configs/omapl138_lcdk.h | 8 --
include/exports.h | 3 +-
include/i2c.h | 80 -----------
include/netdev.h | 1 -
35 files changed, 140 insertions(+), 342 deletions(-)
delete mode 100644 drivers/i2c/i2c-uclass-compat.c
--
2.21.0
next reply other threads:[~2019-07-24 8:12 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-24 8:12 Bartosz Golaszewski [this message]
2019-07-24 8:12 ` [U-Boot] [PATCH v2 01/14] net: davinci_emac: convert to using the driver model Bartosz Golaszewski
2019-07-25 18:43 ` [U-Boot] " Joe Hershberger
2019-07-24 8:12 ` [U-Boot] [PATCH v2 02/14] davinci: remove CONFIG_DM_I2C_COMPAT from defconfigs Bartosz Golaszewski
2019-07-24 8:12 ` [U-Boot] [PATCH v2 03/14] sandbox: " Bartosz Golaszewski
2019-07-24 8:12 ` [U-Boot] [PATCH v2 04/14] i2c: remove i2c driver-model compatibility layer Bartosz Golaszewski
2019-07-24 8:12 ` [U-Boot] [PATCH v2 05/14] omapl138_lcdk_defconfig: don't build support for SPI Bartosz Golaszewski
2019-07-24 8:12 ` [U-Boot] [PATCH v2 06/14] nand: davinci: make davinci_nand_init() static Bartosz Golaszewski
2019-07-24 8:12 ` [U-Boot] [PATCH v2 07/14] nand: davinci: add support for driver model Bartosz Golaszewski
2019-07-24 8:12 ` [U-Boot] [PATCH v2 08/14] davinci: omapl138-lcdk: enable driver model for NAND Bartosz Golaszewski
2019-07-24 8:12 ` [U-Boot] [PATCH v2 09/14] davinci: da850-evm: " Bartosz Golaszewski
2019-07-24 8:12 ` [U-Boot] [PATCH v2 10/14] davinci: omapl138-lcdk: enable SPL_SYS_MALLOC_SIMPLE Bartosz Golaszewski
2019-07-24 8:12 ` [U-Boot] [PATCH v2 11/14] davinci: omapl138-lcdk: enable CONFIG_USE_TINY_PRINTF Bartosz Golaszewski
2019-07-24 8:12 ` [U-Boot] [PATCH v2 12/14] davinci: omapl138-lcdk: remove unneeded includes Bartosz Golaszewski
2019-07-24 8:12 ` [U-Boot] [PATCH v2 13/14] davinci: omapl138-lcdk: enable driver-model in SPL Bartosz Golaszewski
2019-07-24 8:12 ` [U-Boot] [PATCH v2 14/14] configs: omapl138_lcdk: enable NAND self-init " Bartosz Golaszewski
2019-07-24 18:59 ` [U-Boot] [PATCH v2 00/14] ARM: davinci: driver-model improvements Joe Hershberger
2019-07-28 16:46 ` Bartosz Golaszewski
2019-07-28 17:12 ` Tom Rini
2019-07-29 6:55 ` Bartosz Golaszewski
2019-07-29 18:51 ` Joe Hershberger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190724081220.12022-1-brgl@bgdev.pl \
--to=brgl@bgdev.pl \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox