[U-Boot] [PATCH v4 0/2] Add board support for iMX8QXP AI_ML board

[Lukasz Majewski <lukma@denx.de>]

Hi Manivannan,

> Hello,
> 
> This patchset adds initial board support for iMX8QXP AI_ML board
> from Einfochips. This board is one of the Consumer Edition and AI
> boards of the 96Boards family.
> 
> This initial supports contains following peripherals which are tested
> and known to work:
>     
> 1. Debug serial via UART2
> 2. SD card
> 3. Ethernet
> 

Please paste the output when u-boot boots for this board (from the SPL
banner to Linux booting).

> Thanks,
> Mani
> 
> Note: This patchset depends on the below cleanup patches submitted:
> [U-Boot,1/2] arm: imx8: factor out uart init code
> [U-Boot,2/2] arm: imx8: don't duplicate build_info()
> 
> Changes in v4:
> 
> * Incorporated review comments from Fabio.
> 
> Changes in v3:
> 
> * Incorporated review comments from Fabio. Major change is switching
> to distro_boot.
> * Added Reviewed-by tag from Peng Fan.
> 
> Changes in v2:
> 
> * Rebased the patches on top of following patches:
>   [U-Boot,1/2] arm: imx8: factor out uart init code
>   [U-Boot,2/2] arm: imx8: don't duplicate build_info()
> 
> Manivannan Sadhasivam (2):
>   arm: dts: Add devicetree support for iMXQXP AI_ML board
>   board: Add support for iMX8QXP AI_ML board
> 
>  arch/arm/dts/Makefile                         |   1 +
>  arch/arm/dts/fsl-imx8qxp-ai_ml-u-boot.dtsi    | 117 +++++++++++
>  arch/arm/dts/fsl-imx8qxp-ai_ml.dts            | 181
> ++++++++++++++++++ arch/arm/mach-imx/imx8/Kconfig                |
> 6 + board/einfochips/imx8qxp_ai_ml/Kconfig        |  12 ++
>  board/einfochips/imx8qxp_ai_ml/MAINTAINERS    |   6 +
>  board/einfochips/imx8qxp_ai_ml/Makefile       |   8 +
>  board/einfochips/imx8qxp_ai_ml/README         |  49 +++++
>  .../einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c  | 117 +++++++++++
>  board/einfochips/imx8qxp_ai_ml/imximage.cfg   |  24 +++
>  board/einfochips/imx8qxp_ai_ml/spl.c          |  49 +++++
>  configs/imx8qxp_ai_ml_defconfig               |  83 ++++++++
>  include/configs/imx8qxp_ai_ml.h               | 104 ++++++++++
>  13 files changed, 757 insertions(+)
>  create mode 100644 arch/arm/dts/fsl-imx8qxp-ai_ml-u-boot.dtsi
>  create mode 100644 arch/arm/dts/fsl-imx8qxp-ai_ml.dts
>  create mode 100644 board/einfochips/imx8qxp_ai_ml/Kconfig
>  create mode 100644 board/einfochips/imx8qxp_ai_ml/MAINTAINERS
>  create mode 100644 board/einfochips/imx8qxp_ai_ml/Makefile
>  create mode 100644 board/einfochips/imx8qxp_ai_ml/README
>  create mode 100644 board/einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c
>  create mode 100644 board/einfochips/imx8qxp_ai_ml/imximage.cfg
>  create mode 100644 board/einfochips/imx8qxp_ai_ml/spl.c
>  create mode 100644 configs/imx8qxp_ai_ml_defconfig
>  create mode 100644 include/configs/imx8qxp_ai_ml.h
> 




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190724/7c8b64df/attachment.sig>