From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lukasz Majewski Date: Wed, 24 Jul 2019 09:52:53 +0200 Subject: [U-Boot] [PATCH v4 0/2] Add board support for iMX8QXP AI_ML board In-Reply-To: <20190719065743.28192-1-manivannan.sadhasivam@linaro.org> References: <20190719065743.28192-1-manivannan.sadhasivam@linaro.org> Message-ID: <20190724095253.4474773b@jawa> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Manivannan, > Hello, > > This patchset adds initial board support for iMX8QXP AI_ML board > from Einfochips. This board is one of the Consumer Edition and AI > boards of the 96Boards family. > > This initial supports contains following peripherals which are tested > and known to work: > > 1. Debug serial via UART2 > 2. SD card > 3. Ethernet > Please paste the output when u-boot boots for this board (from the SPL banner to Linux booting). > Thanks, > Mani > > Note: This patchset depends on the below cleanup patches submitted: > [U-Boot,1/2] arm: imx8: factor out uart init code > [U-Boot,2/2] arm: imx8: don't duplicate build_info() > > Changes in v4: > > * Incorporated review comments from Fabio. > > Changes in v3: > > * Incorporated review comments from Fabio. Major change is switching > to distro_boot. > * Added Reviewed-by tag from Peng Fan. > > Changes in v2: > > * Rebased the patches on top of following patches: > [U-Boot,1/2] arm: imx8: factor out uart init code > [U-Boot,2/2] arm: imx8: don't duplicate build_info() > > Manivannan Sadhasivam (2): > arm: dts: Add devicetree support for iMXQXP AI_ML board > board: Add support for iMX8QXP AI_ML board > > arch/arm/dts/Makefile | 1 + > arch/arm/dts/fsl-imx8qxp-ai_ml-u-boot.dtsi | 117 +++++++++++ > arch/arm/dts/fsl-imx8qxp-ai_ml.dts | 181 > ++++++++++++++++++ arch/arm/mach-imx/imx8/Kconfig | > 6 + board/einfochips/imx8qxp_ai_ml/Kconfig | 12 ++ > board/einfochips/imx8qxp_ai_ml/MAINTAINERS | 6 + > board/einfochips/imx8qxp_ai_ml/Makefile | 8 + > board/einfochips/imx8qxp_ai_ml/README | 49 +++++ > .../einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c | 117 +++++++++++ > board/einfochips/imx8qxp_ai_ml/imximage.cfg | 24 +++ > board/einfochips/imx8qxp_ai_ml/spl.c | 49 +++++ > configs/imx8qxp_ai_ml_defconfig | 83 ++++++++ > include/configs/imx8qxp_ai_ml.h | 104 ++++++++++ > 13 files changed, 757 insertions(+) > create mode 100644 arch/arm/dts/fsl-imx8qxp-ai_ml-u-boot.dtsi > create mode 100644 arch/arm/dts/fsl-imx8qxp-ai_ml.dts > create mode 100644 board/einfochips/imx8qxp_ai_ml/Kconfig > create mode 100644 board/einfochips/imx8qxp_ai_ml/MAINTAINERS > create mode 100644 board/einfochips/imx8qxp_ai_ml/Makefile > create mode 100644 board/einfochips/imx8qxp_ai_ml/README > create mode 100644 board/einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c > create mode 100644 board/einfochips/imx8qxp_ai_ml/imximage.cfg > create mode 100644 board/einfochips/imx8qxp_ai_ml/spl.c > create mode 100644 configs/imx8qxp_ai_ml_defconfig > create mode 100644 include/configs/imx8qxp_ai_ml.h > Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 488 bytes Desc: OpenPGP digital signature URL: