public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Bartosz Golaszewski <brgl@bgdev.pl>
To: u-boot@lists.denx.de
Subject: [U-Boot] [RESEND PATCH v2 06/13] nand: davinci: add support for driver model
Date: Mon, 29 Jul 2019 08:58:03 +0200	[thread overview]
Message-ID: <20190729065810.19452-7-brgl@bgdev.pl> (raw)
In-Reply-To: <20190729065810.19452-1-brgl@bgdev.pl>

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Extend the davinci NAND driver to support the driver model. For now this
doesn't add any device-tree parsing due to the fact that we can't access
the actual nand node on the device-tree - it's a subnode of the aemif
device and we don't have an aemif driver on davinci at the moment.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/mtd/nand/raw/davinci_nand.c | 46 ++++++++++++++++++++++++++++-
 1 file changed, 45 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/raw/davinci_nand.c b/drivers/mtd/nand/raw/davinci_nand.c
index e1c4498cb9..33c2f16be8 100644
--- a/drivers/mtd/nand/raw/davinci_nand.c
+++ b/drivers/mtd/nand/raw/davinci_nand.c
@@ -31,6 +31,7 @@
 #include <common.h>
 #include <asm/io.h>
 #include <nand.h>
+#include <dm/uclass.h>
 #include <asm/ti-common/davinci_nand.h>
 
 /* Definitions for 4-bit hardware ECC */
@@ -785,10 +786,53 @@ static void davinci_nand_init(struct nand_chip *nand)
 	nand->dev_ready = nand_davinci_dev_ready;
 }
 
-int board_nand_init(struct nand_chip *chip) __attribute__((weak));
+#ifdef CONFIG_SYS_NAND_SELF_INIT
+static int davinci_nand_probe(struct udevice *dev)
+{
+	struct nand_chip *nand = dev_get_priv(dev);
+	struct mtd_info *mtd = nand_to_mtd(nand);
+	int ret;
+
+	nand->IO_ADDR_R = (void __iomem *)CONFIG_SYS_NAND_BASE;
+	nand->IO_ADDR_W = (void __iomem *)CONFIG_SYS_NAND_BASE;
+
+	davinci_nand_init(nand);
+
+	ret = nand_scan(mtd, CONFIG_SYS_NAND_MAX_CHIPS);
+	if (ret)
+		return ret;
+
+	return nand_register(0, mtd);
+}
+
+static const struct udevice_id davinci_nand_ids[] = {
+	{ .compatible = "ti,davinci-nand" },
+	{ }
+};
+
+U_BOOT_DRIVER(davinci_nand) = {
+	.name		= "davinci-nand",
+	.id		= UCLASS_MTD,
+	.of_match	= davinci_nand_ids,
+	.probe		= davinci_nand_probe,
+	.priv_auto_alloc_size = sizeof(struct nand_chip),
+};
+
+void board_nand_init(void)
+{
+	struct udevice *dev;
+	int ret;
 
+	ret = uclass_get_device_by_driver(UCLASS_MTD,
+					  DM_GET_DRIVER(davinci_nand), &dev);
+	if (ret && ret != -ENODEV)
+		pr_err("Failed to initialize %s: %d\n", dev->name, ret);
+}
+#else
+int board_nand_init(struct nand_chip *chip) __attribute__((weak));
 int board_nand_init(struct nand_chip *chip)
 {
 	davinci_nand_init(chip);
 	return 0;
 }
+#endif /* CONFIG_SYS_NAND_SELF_INIT */
-- 
2.21.0

  parent reply	other threads:[~2019-07-29  6:58 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-29  6:57 [U-Boot] [RESEND PATCH v2 00/13] ARM: davinci: driver-model improvements Bartosz Golaszewski
2019-07-29  6:57 ` [U-Boot] [RESEND PATCH v2 01/13] davinci: remove CONFIG_DM_I2C_COMPAT from defconfigs Bartosz Golaszewski
2019-07-29 16:14   ` Tom Rini
2019-07-29 16:24     ` Adam Ford
2019-07-30  1:21   ` Tom Rini
2019-07-29  6:57 ` [U-Boot] [RESEND PATCH v2 02/13] sandbox: " Bartosz Golaszewski
2019-07-30  1:21   ` Tom Rini
2019-07-29  6:58 ` [U-Boot] [RESEND PATCH v2 03/13] i2c: remove i2c driver-model compatibility layer Bartosz Golaszewski
2019-07-30  1:21   ` Tom Rini
2019-07-29  6:58 ` [U-Boot] [RESEND PATCH v2 04/13] omapl138_lcdk_defconfig: don't build support for SPI Bartosz Golaszewski
2019-07-30  1:22   ` Tom Rini
2019-07-29  6:58 ` [U-Boot] [RESEND PATCH v2 05/13] nand: davinci: make davinci_nand_init() static Bartosz Golaszewski
2019-07-30  1:22   ` Tom Rini
2019-07-29  6:58 ` Bartosz Golaszewski [this message]
2019-07-30  1:22   ` [U-Boot] [RESEND PATCH v2 06/13] nand: davinci: add support for driver model Tom Rini
2019-07-29  6:58 ` [U-Boot] [RESEND PATCH v2 07/13] davinci: omapl138-lcdk: enable driver model for NAND Bartosz Golaszewski
2019-07-30  1:22   ` Tom Rini
2019-07-29  6:58 ` [U-Boot] [RESEND PATCH v2 08/13] davinci: da850-evm: " Bartosz Golaszewski
2019-07-29 18:14   ` Adam Ford
2019-07-30  1:22   ` Tom Rini
2019-07-29  6:58 ` [U-Boot] [RESEND PATCH v2 09/13] davinci: omapl138-lcdk: enable SPL_SYS_MALLOC_SIMPLE Bartosz Golaszewski
2019-07-30  1:22   ` Tom Rini
2019-07-29  6:58 ` [U-Boot] [RESEND PATCH v2 10/13] davinci: omapl138-lcdk: enable CONFIG_USE_TINY_PRINTF Bartosz Golaszewski
2019-07-30  1:22   ` Tom Rini
2019-07-29  6:58 ` [U-Boot] [RESEND PATCH v2 11/13] davinci: omapl138-lcdk: remove unneeded includes Bartosz Golaszewski
2019-07-30  1:22   ` Tom Rini
2019-07-29  6:58 ` [U-Boot] [RESEND PATCH v2 12/13] davinci: omapl138-lcdk: enable driver-model in SPL Bartosz Golaszewski
2019-07-30  1:23   ` Tom Rini
2019-09-25 13:34   ` Faiz Abbas
2019-10-25 16:10     ` Bartosz Golaszewski
2019-10-25 17:25       ` Rizvi, Mohammad Faiz Abbas
2019-10-27 18:05         ` Bartosz Golaszewski
2019-11-08 15:50       ` Bartosz Golaszewski
2019-11-08 16:14         ` Adam Ford
2019-11-08 17:33           ` Bartosz Golaszewski
2019-11-08 17:59             ` Bartosz Golaszewski
2019-11-11 12:57               ` Adam Ford
2019-11-13 10:52                 ` Bartosz Golaszewski
2019-11-13 10:55                   ` Bartosz Golaszewski
2019-11-11 10:18         ` Faiz Abbas
2019-07-29  6:58 ` [U-Boot] [RESEND PATCH v2 13/13] configs: omapl138_lcdk: enable NAND self-init " Bartosz Golaszewski
2019-07-30  1:23   ` Tom Rini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190729065810.19452-7-brgl@bgdev.pl \
    --to=brgl@bgdev.pl \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox