From: Lukasz Majewski <lukma@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 02/11] imx: tpc70: config: Update TPC70 config to support eMMC's boot0 SPL update
Date: Tue, 30 Jul 2019 09:12:04 +0200 [thread overview]
Message-ID: <20190730071213.11238-3-lukma@denx.de> (raw)
In-Reply-To: <20190730071213.11238-1-lukma@denx.de>
The TPC70 can boot from eMMC's boot0. This patch allows it to update
this HW partition's SPL.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
---
include/configs/kp_imx6q_tpc.h | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/include/configs/kp_imx6q_tpc.h b/include/configs/kp_imx6q_tpc.h
index 92f2bbb75b..2d1d1203b5 100644
--- a/include/configs/kp_imx6q_tpc.h
+++ b/include/configs/kp_imx6q_tpc.h
@@ -43,6 +43,7 @@
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_SYS_FSL_USDHC_NUM 2
#define CONFIG_SYS_MMC_ENV_DEV 1 /* 0 = SDHC2, 1 = SDHC4 (eMMC) */
+#define CONFIG_SUPPORT_EMMC_BOOT
/* UART */
#define CONFIG_MXC_UART
@@ -103,6 +104,10 @@
"setexpr blkc ${blkc} + 1;" \
"mmc write ${loadaddr} 0x2 ${blkc};" \
"fi;\0" \
+ "upd_SPL_mmc=mmc dev 1; mmc partconf 1 0 1 1; run upd_SPL_sd\0" \
+ "upd_uboot_mmc=mmc dev 1; mmc partconf 1 0 1 1; run upd_uboot_sd\0" \
+ "up_mmc=run upd_SPL_mmc; run upd_uboot_mmc\0" \
+ "up_sd=run upd_SPL_sd; run upd_uboot_sd\0" \
"upd_wic=" \
"if tftp ${loadaddr} ${wic_file}; then " \
"setexpr blkc ${filesize} / 0x200;" \
--
2.11.0
next prev parent reply other threads:[~2019-07-30 7:12 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-30 7:12 [U-Boot] [PATCH v2 00/11] dm: Convert TPC70 to use DM and DTS in SPL and u-boot proper Lukasz Majewski
2019-07-30 7:12 ` [U-Boot] [PATCH v2 01/11] imx: tpc70: config: Add script commands to update u-boot and OE's wic Lukasz Majewski
2019-08-09 6:35 ` Peng Fan
2019-07-30 7:12 ` Lukasz Majewski [this message]
2019-08-09 7:03 ` [U-Boot] [PATCH v2 02/11] imx: tpc70: config: Update TPC70 config to support eMMC's boot0 SPL update Peng Fan
2019-07-30 7:12 ` [U-Boot] [PATCH v2 03/11] imx: tpc70: Add board_boot_order() to distinguish between eMMC and SD boot Lukasz Majewski
2019-08-09 7:04 ` Peng Fan
2019-07-30 7:12 ` [U-Boot] [PATCH v2 04/11] imx: tpc70: DTS: Explicitly add imx6q-kp.dtb to Makefile for DTB compilation Lukasz Majewski
2019-08-09 7:05 ` Peng Fan
2019-07-30 7:12 ` [U-Boot] [PATCH v2 05/11] imx: tpc70: cosmetic: Replace magic numbers when setting ENET clock Lukasz Majewski
2019-08-09 7:07 ` Peng Fan
2019-08-11 21:27 ` Lukasz Majewski
2019-07-30 7:12 ` [U-Boot] [PATCH v2 06/11] imx: tpc70: led: Enable LED default state Lukasz Majewski
2019-08-09 7:08 ` Peng Fan
2019-07-30 7:12 ` [U-Boot] [PATCH v2 07/11] imx: tpc70: dts: Add TPC70 board (imx6q based) device tree description Lukasz Majewski
2019-08-09 7:10 ` Peng Fan
2019-08-11 21:25 ` Lukasz Majewski
2019-08-11 23:55 ` Tom Rini
2019-08-12 6:39 ` Lukasz Majewski
2019-08-13 8:41 ` Peng Fan
2019-07-30 7:12 ` [U-Boot] [PATCH v2 08/11] imx: dts: Add u-boot specific set of device tree properties for tpc70 Lukasz Majewski
2019-07-30 7:12 ` [U-Boot] [PATCH v2 09/11] imx: tpc70: Convert TPC70 (imx6q) board to use DM/DTS in SPL and u-boot Lukasz Majewski
2019-07-30 7:12 ` [U-Boot] [PATCH v2 10/11] imx: spl: tpc70: Do not remove clock related properties from DTS Lukasz Majewski
2019-08-09 7:11 ` Peng Fan
2019-07-30 7:12 ` [U-Boot] [PATCH v2 11/11] imx: config: Update KP's TPC70 config to support SWUpdate Lukasz Majewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190730071213.11238-3-lukma@denx.de \
--to=lukma@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox