From: Lukasz Majewski <lukma@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 08/11] imx: dts: Add u-boot specific set of device tree properties for tpc70
Date: Tue, 30 Jul 2019 09:12:10 +0200 [thread overview]
Message-ID: <20190730071213.11238-9-lukma@denx.de> (raw)
In-Reply-To: <20190730071213.11238-1-lukma@denx.de>
This commit adds new file - imx6q-kp-u-boot.dtsi with a set of u-boot
specific properties for imx6q KP device.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
---
arch/arm/dts/imx6q-kp-u-boot.dtsi | 59 +++++++++++++++++++++++++++++++++++++++
1 file changed, 59 insertions(+)
create mode 100644 arch/arm/dts/imx6q-kp-u-boot.dtsi
diff --git a/arch/arm/dts/imx6q-kp-u-boot.dtsi b/arch/arm/dts/imx6q-kp-u-boot.dtsi
new file mode 100644
index 0000000000..e6b71b22ae
--- /dev/null
+++ b/arch/arm/dts/imx6q-kp-u-boot.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019
+ * Lukasz Majewski, DENX Software Engineering, lukma at denx.de
+ *
+ * SPDX-License-Identifier: GPL-2.0+ or X11
+ */
+
+#include "imx6qdl-u-boot.dtsi"
+
+/ {
+ clocks {
+ u-boot,dm-spl;
+ osc {
+ u-boot,dm-spl;
+ };
+ };
+
+ wdt-reboot {
+ compatible = "wdt-reboot";
+ wdt = <&wdog1>;
+ };
+};
+
+&clks {
+ u-boot,dm-pre-reloc;
+};
+
+&gpio2 {
+ u-boot,dm-spl;
+};
+
+&pinctrl_uart1 {
+ u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2 {
+ u-boot,dm-spl;
+};
+
+&pinctrl_usdhc4 {
+ u-boot,dm-spl;
+};
+
+&uart1 {
+ u-boot,dm-spl;
+};
+
+&usdhc2 {
+ u-boot,dm-spl;
+};
+
+&usdhc4 {
+ u-boot,dm-spl;
+};
+
+&wdog1 {
+ u-boot,dm-spl;
+};
--
2.11.0
next prev parent reply other threads:[~2019-07-30 7:12 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-30 7:12 [U-Boot] [PATCH v2 00/11] dm: Convert TPC70 to use DM and DTS in SPL and u-boot proper Lukasz Majewski
2019-07-30 7:12 ` [U-Boot] [PATCH v2 01/11] imx: tpc70: config: Add script commands to update u-boot and OE's wic Lukasz Majewski
2019-08-09 6:35 ` Peng Fan
2019-07-30 7:12 ` [U-Boot] [PATCH v2 02/11] imx: tpc70: config: Update TPC70 config to support eMMC's boot0 SPL update Lukasz Majewski
2019-08-09 7:03 ` Peng Fan
2019-07-30 7:12 ` [U-Boot] [PATCH v2 03/11] imx: tpc70: Add board_boot_order() to distinguish between eMMC and SD boot Lukasz Majewski
2019-08-09 7:04 ` Peng Fan
2019-07-30 7:12 ` [U-Boot] [PATCH v2 04/11] imx: tpc70: DTS: Explicitly add imx6q-kp.dtb to Makefile for DTB compilation Lukasz Majewski
2019-08-09 7:05 ` Peng Fan
2019-07-30 7:12 ` [U-Boot] [PATCH v2 05/11] imx: tpc70: cosmetic: Replace magic numbers when setting ENET clock Lukasz Majewski
2019-08-09 7:07 ` Peng Fan
2019-08-11 21:27 ` Lukasz Majewski
2019-07-30 7:12 ` [U-Boot] [PATCH v2 06/11] imx: tpc70: led: Enable LED default state Lukasz Majewski
2019-08-09 7:08 ` Peng Fan
2019-07-30 7:12 ` [U-Boot] [PATCH v2 07/11] imx: tpc70: dts: Add TPC70 board (imx6q based) device tree description Lukasz Majewski
2019-08-09 7:10 ` Peng Fan
2019-08-11 21:25 ` Lukasz Majewski
2019-08-11 23:55 ` Tom Rini
2019-08-12 6:39 ` Lukasz Majewski
2019-08-13 8:41 ` Peng Fan
2019-07-30 7:12 ` Lukasz Majewski [this message]
2019-07-30 7:12 ` [U-Boot] [PATCH v2 09/11] imx: tpc70: Convert TPC70 (imx6q) board to use DM/DTS in SPL and u-boot Lukasz Majewski
2019-07-30 7:12 ` [U-Boot] [PATCH v2 10/11] imx: spl: tpc70: Do not remove clock related properties from DTS Lukasz Majewski
2019-08-09 7:11 ` Peng Fan
2019-07-30 7:12 ` [U-Boot] [PATCH v2 11/11] imx: config: Update KP's TPC70 config to support SWUpdate Lukasz Majewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190730071213.11238-9-lukma@denx.de \
--to=lukma@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox