[U-Boot] [PATCH 3/3] mtd: spi: Drop sf.c

[Lukasz Majewski <lukma@denx.de>]

Hi Jagan,

> spi_write_then_read, will manage to do the respective
> spi_xfer based on the tx_buf, rx_buf so drop the
> legacy spi_flash_read/write/cm code.

I guess that the 'sf' command will stay with us a bit longer to avoid
compatibility issues on some legacy boards?

And I also assume that we now advice to switch to 'mtd' command instead
of (now deprecated?) 'sf' ?

> 
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
>  drivers/mtd/spi/Makefile      |  2 +-
>  drivers/mtd/spi/sf.c          | 53
> ----------------------------------- drivers/mtd/spi/sf_internal.h |
> 18 ------------ 3 files changed, 1 insertion(+), 72 deletions(-)
>  delete mode 100644 drivers/mtd/spi/sf.c
> 
> diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile
> index f99f6cb16e..20db1015d9 100644
> --- a/drivers/mtd/spi/Makefile
> +++ b/drivers/mtd/spi/Makefile
> @@ -18,6 +18,6 @@ spi-nor-y += spi-nor-core.o
>  endif
>  
>  obj-$(CONFIG_SPI_FLASH) += spi-nor.o
> -obj-$(CONFIG_SPI_FLASH_DATAFLASH) += sf_dataflash.o sf.o
> +obj-$(CONFIG_SPI_FLASH_DATAFLASH) += sf_dataflash.o
>  obj-$(CONFIG_SPI_FLASH_MTD) += sf_mtd.o
>  obj-$(CONFIG_SPI_FLASH_SANDBOX) += sandbox.o
> diff --git a/drivers/mtd/spi/sf.c b/drivers/mtd/spi/sf.c
> deleted file mode 100644
> index ee3cf8b759..0000000000
> --- a/drivers/mtd/spi/sf.c
> +++ /dev/null
> @@ -1,53 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0+
> -/*
> - * SPI flash interface
> - *
> - * Copyright (C) 2008 Atmel Corporation
> - * Copyright (C) 2010 Reinhard Meyer, EMK Elektronik
> - */
> -
> -#include <common.h>
> -#include <spi.h>
> -
> -static int spi_flash_read_write(struct spi_slave *spi,
> -				const u8 *cmd, size_t cmd_len,
> -				const u8 *data_out, u8 *data_in,
> -				size_t data_len)
> -{
> -	unsigned long flags = SPI_XFER_BEGIN;
> -	int ret;
> -
> -	if (data_len == 0)
> -		flags |= SPI_XFER_END;
> -
> -	ret = spi_xfer(spi, cmd_len * 8, cmd, NULL, flags);
> -	if (ret) {
> -		debug("SF: Failed to send command (%zu bytes): %d\n",
> -		      cmd_len, ret);
> -	} else if (data_len != 0) {
> -		ret = spi_xfer(spi, data_len * 8, data_out, data_in,
> -					SPI_XFER_END);
> -		if (ret)
> -			debug("SF: Failed to transfer %zu bytes of
> data: %d\n",
> -			      data_len, ret);
> -	}
> -
> -	return ret;
> -}
> -
> -int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd,
> -		size_t cmd_len, void *data, size_t data_len)
> -{
> -	return spi_flash_read_write(spi, cmd, cmd_len, NULL, data,
> data_len); -}
> -
> -int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response,
> size_t len) -{
> -	return spi_flash_cmd_read(spi, &cmd, 1, response, len);
> -}
> -
> -int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t
> cmd_len,
> -		const void *data, size_t data_len)
> -{
> -	return spi_flash_read_write(spi, cmd, cmd_len, data, NULL,
> data_len); -}
> diff --git a/drivers/mtd/spi/sf_internal.h
> b/drivers/mtd/spi/sf_internal.h index a6bf734830..ece6fbc258 100644
> --- a/drivers/mtd/spi/sf_internal.h
> +++ b/drivers/mtd/spi/sf_internal.h
> @@ -72,24 +72,6 @@ extern const struct flash_info spi_nor_ids[];
>  #define JEDEC_MFR(info)	((info)->id[0])
>  #define JEDEC_ID(info)		(((info)->id[1]) << 8 |
> ((info)->id[2])) 
> -/* Send a single-byte command to the device and read the response */
> -int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response,
> size_t len); -
> -/*
> - * Send a multi-byte command to the device and read the response.
> Used
> - * for flash array reads, etc.
> - */
> -int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd,
> -		size_t cmd_len, void *data, size_t data_len);
> -
> -/*
> - * Send a multi-byte command to the device followed by (optional)
> - * data. Used for programming the flash array, etc.
> - */
> -int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t
> cmd_len,
> -		const void *data, size_t data_len);
> -
> -
>  /* Get software write-protect value (BP bits) */
>  int spi_flash_cmd_get_sw_write_prot(struct spi_flash *flash);
>  




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190802/c34d2cb9/attachment.sig>