From: Igor Opaniuk <igor.opaniuk@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 06/10] apalis-tk1: switch to zImage
Date: Mon, 5 Aug 2019 18:20:43 +0300 [thread overview]
Message-ID: <20190805152047.30405-7-igor.opaniuk@gmail.com> (raw)
In-Reply-To: <20190805152047.30405-1-igor.opaniuk@gmail.com>
From: Igor Opaniuk <igor.opaniuk@toradex.com>
Switch to the generic compressed Kernel image type (zImage) instead of
the U-Boot specific uImage format.
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
---
include/configs/apalis-tk1.h | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h
index d2ea5450bd..ae62f00cd1 100644
--- a/include/configs/apalis-tk1.h
+++ b/include/configs/apalis-tk1.h
@@ -44,7 +44,7 @@
#define DFU_ALT_EMMC_INFO "apalis-tk1.img raw 0x0 0x500 mmcpart 1; " \
"boot part 0 1 mmcpart 0; " \
"rootfs part 0 2 mmcpart 0; " \
- "uImage fat 0 1 mmcpart 0; " \
+ "zImage fat 0 1 mmcpart 0; " \
"tegra124-apalis-eval.dtb fat 0 1 mmcpart 0"
#define EMMC_BOOTCMD \
@@ -53,7 +53,7 @@
"${setupargs} ${vidargs}; echo Booting from internal eMMC " \
"chip...; run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
"${boot_file} && run fdt_fixup && " \
- "bootm ${kernel_addr_r} - ${dtbparam}\0" \
+ "bootz ${kernel_addr_r} - ${dtbparam}\0" \
"emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
"${soc}-apalis-${fdt_board}.dtb && " \
"setenv dtbparam ${fdt_addr_r}\0"
@@ -63,7 +63,7 @@
"nfsboot=pci enum; run setup; setenv bootargs ${defargs} ${nfsargs} " \
"${setupargs} ${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
"run nfsdtbload; dhcp ${kernel_addr_r} " \
- "&& run fdt_fixup && bootm ${kernel_addr_r} - ${dtbparam}\0" \
+ "&& run fdt_fixup && bootz ${kernel_addr_r} - ${dtbparam}\0" \
"nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} " \
"${soc}-apalis-${fdt_board}.dtb " \
"&& setenv dtbparam ${fdt_addr_r}\0"
@@ -74,7 +74,7 @@
"${vidargs}; echo Booting from SD card in 8bit slot...; " \
"run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
"${boot_file} && run fdt_fixup && " \
- "bootm ${kernel_addr_r} - ${dtbparam}\0" \
+ "bootz ${kernel_addr_r} - ${dtbparam}\0" \
"sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
"${soc}-apalis-${fdt_board}.dtb " \
"&& setenv dtbparam ${fdt_addr_r}\0"
@@ -85,13 +85,13 @@
"${usbargs} ${vidargs}; echo Booting from USB stick...; " \
"usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
"${boot_file} && run fdt_fixup && " \
- "bootm ${kernel_addr_r} - ${dtbparam}\0" \
+ "bootz ${kernel_addr_r} - ${dtbparam}\0" \
"usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
"${soc}-apalis-${fdt_board}.dtb " \
"&& setenv dtbparam ${fdt_addr_r}\0"
#define BOARD_EXTRA_ENV_SETTINGS \
- "boot_file=uImage\0" \
+ "boot_file=zImage\0" \
"console=ttyS0\0" \
"defargs=lp0_vec=2064 at 0xf46ff000 core_edp_mv=1150 core_edp_ma=4000 " \
"usb_port_owner_info=2 lane_owner_info=6 emc_max_dvfs=0 " \
--
2.17.1
next prev parent reply other threads:[~2019-08-05 15:20 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-05 15:20 [U-Boot] [PATCH v3 00/10] apalis-tk1: fixes/updates for v2019.10 Igor Opaniuk
2019-08-05 15:20 ` [U-Boot] [PATCH v3 01/10] apalis-tk1: do not explicitly release reset_moci# Igor Opaniuk
2019-08-05 15:20 ` [U-Boot] [PATCH v3 02/10] apalis-tk1: set apalis gpio 8 aka fan_en Igor Opaniuk
2019-08-05 15:20 ` [U-Boot] [PATCH v3 03/10] apalis-tk1: provide proper USB vendor id Igor Opaniuk
2019-08-05 15:20 ` [U-Boot] [PATCH v3 04/10] apalis-tk1: enable user debug by default Igor Opaniuk
2019-08-05 15:20 ` [U-Boot] [PATCH v3 05/10] apalis-tk1: add pcie_aspm=off to defargs Igor Opaniuk
2019-08-05 15:20 ` Igor Opaniuk [this message]
2019-08-05 15:20 ` [U-Boot] [PATCH v3 07/10] apalis-tk1/t30: colibri_t30: display reset reason Igor Opaniuk
2019-08-05 15:20 ` [U-Boot] [PATCH v3 08/10] apalis-tk1: remove default vesa vga mode from vidargs Igor Opaniuk
2019-08-05 15:20 ` [U-Boot] [PATCH v3 09/10] apalis-tk1: support v1.2 hardware revision Igor Opaniuk
2019-08-05 15:20 ` [U-Boot] [PATCH v3 10/10] apalis-tk1: remove non-esential power rails on boot Igor Opaniuk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190805152047.30405-7-igor.opaniuk@gmail.com \
--to=igor.opaniuk@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox