From: Lukasz Majewski <lukma@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 17/22] imx8m: rename clock to clock_imx8mq
Date: Mon, 12 Aug 2019 00:01:15 +0200 [thread overview]
Message-ID: <20190812000115.11d3e7f9@jawa> (raw)
In-Reply-To: <20190809043014.32510-18-peng.fan@nxp.com>
On Fri, 9 Aug 2019 04:15:34 +0000
Peng Fan <peng.fan@nxp.com> wrote:
> i.MX8MQ and i.MX8MM has totally different pll design, so
> rename clock to clock_imx8mq.
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
> arch/arm/mach-imx/imx8m/Makefile | 3 ++-
> arch/arm/mach-imx/imx8m/{clock.c => clock_imx8mq.c} | 0
> 2 files changed, 2 insertions(+), 1 deletion(-)
> rename arch/arm/mach-imx/imx8m/{clock.c => clock_imx8mq.c} (100%)
>
> diff --git a/arch/arm/mach-imx/imx8m/Makefile
> b/arch/arm/mach-imx/imx8m/Makefile index feff4941c1..42a1544c6b 100644
> --- a/arch/arm/mach-imx/imx8m/Makefile
> +++ b/arch/arm/mach-imx/imx8m/Makefile
> @@ -3,4 +3,5 @@
> # Copyright 2017 NXP
>
> obj-y += lowlevel_init.o
> -obj-y += clock.o clock_slice.o soc.o
> +obj-y += clock_slice.o soc.o
> +obj-$(CONFIG_IMX8MQ) += clock_imx8mq.o
Shouldn't there be then two CONFIG_ entries? LIke CONFIG_IMX8MM and
CONFIG_IMX8MQ?
> diff --git a/arch/arm/mach-imx/imx8m/clock.c
> b/arch/arm/mach-imx/imx8m/clock_imx8mq.c similarity index 100%
> rename from arch/arm/mach-imx/imx8m/clock.c
> rename to arch/arm/mach-imx/imx8m/clock_imx8mq.c
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190812/7ace7180/attachment.sig>
next prev parent reply other threads:[~2019-08-11 22:01 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-09 4:14 [U-Boot] [PATCH 00/22] i.MX8MM support Peng Fan
2019-08-09 4:14 ` [U-Boot] [PATCH 01/22] tools: imx8m_image: align spl bin image size Peng Fan
2019-08-11 22:11 ` Lukasz Majewski
2019-08-13 8:53 ` Peng Fan
2019-08-14 7:21 ` Schrempf Frieder
2019-08-14 8:29 ` Peng Fan
2019-08-09 4:14 ` [U-Boot] [PATCH 02/22] ddr: imx8m: fix ddr firmware location when enable SPL OF Peng Fan
2019-08-14 7:35 ` Schrempf Frieder
2019-08-14 7:59 ` Peng Fan
2019-08-14 8:04 ` Schrempf Frieder
2019-08-09 4:14 ` [U-Boot] [PATCH 03/22] imx8m: add image cfg for i.MX8MM lpddr4 Peng Fan
2019-08-14 7:59 ` Schrempf Frieder
2019-08-14 8:08 ` Peng Fan
2019-08-09 4:14 ` [U-Boot] [PATCH 04/22] imx: add IMX8MQ kconfig entry Peng Fan
2019-08-09 4:14 ` [U-Boot] [PATCH 05/22] imx: add IMX8MM " Peng Fan
2019-08-09 4:14 ` [U-Boot] [PATCH 06/22] imx: imx8mm: add clock bindings header Peng Fan
2019-08-09 4:15 ` [U-Boot] [PATCH 07/22] imx: add i.MX8MM cpu type Peng Fan
2019-08-09 4:15 ` [U-Boot] [PATCH 08/22] imx: spl: add spl_board_boot_device for i.MX8MM Peng Fan
2019-08-09 4:15 ` [U-Boot] [PATCH 09/22] imx8m: update imx-regs " Peng Fan
2019-08-14 15:03 ` Schrempf Frieder
2019-08-15 1:01 ` Peng Fan
2019-08-26 14:08 ` Schrempf Frieder
2019-08-09 4:15 ` [U-Boot] [PATCH 10/22] imx: add get_cpu_rev support " Peng Fan
2019-08-09 4:15 ` [U-Boot] [PATCH 11/22] imx8m: add pin header " Peng Fan
2019-08-11 21:56 ` Lukasz Majewski
2019-08-13 8:43 ` Peng Fan
2019-08-09 4:15 ` [U-Boot] [PATCH 12/22] imx: add i.MX8MM PE property Peng Fan
2019-08-09 4:15 ` [U-Boot] [PATCH 13/22] imx8m: Fix MMU table issue for OPTEE memory Peng Fan
2019-08-11 21:59 ` Lukasz Majewski
2019-08-13 8:46 ` Peng Fan
2019-08-09 4:15 ` [U-Boot] [PATCH 14/22] imx8m: set BYPASS ID SWAP to avoid AXI bus errors Peng Fan
2019-08-09 4:15 ` [U-Boot] [PATCH 15/22] imx8m: Configure trustzone region 0 for non-secure access Peng Fan
2019-08-09 4:15 ` [U-Boot] [PATCH 16/22] imx8m: soc: enable SCTR clock before timer init Peng Fan
2019-08-09 4:15 ` [U-Boot] [PATCH 17/22] imx8m: rename clock to clock_imx8mq Peng Fan
2019-08-11 22:01 ` Lukasz Majewski [this message]
2019-08-13 8:48 ` Peng Fan
2019-08-09 4:15 ` [U-Boot] [PATCH 18/22] imx8m: restructure clock.h Peng Fan
2019-08-11 22:02 ` Lukasz Majewski
2019-08-13 8:49 ` Peng Fan
2019-08-09 4:15 ` [U-Boot] [PATCH 19/22] imx8m: add clk support for i.MX8MM Peng Fan
2019-08-09 4:15 ` [U-Boot] [PATCH 20/22] arm: dts: import i.MX8MM dtsi Peng Fan
2019-08-14 10:21 ` Schrempf Frieder
2019-08-15 1:11 ` Peng Fan
2019-08-09 4:15 ` [U-Boot] [PATCH 21/22] arm: dts: add i.MX8MM pin func Peng Fan
2019-08-09 4:15 ` [U-Boot] [PATCH 22/22] imx: Add i.MX8MM EVK board support Peng Fan
2019-08-10 13:06 ` Lukasz Majewski
2019-08-14 16:32 ` Schrempf Frieder
2019-08-15 0:57 ` Peng Fan
2019-08-26 15:20 ` Schrempf Frieder
2019-08-27 1:09 ` Peng Fan
2019-08-27 3:25 ` Peng Fan
2019-08-14 16:34 ` [U-Boot] [PATCH 00/22] i.MX8MM support Schrempf Frieder
2019-08-15 0:58 ` Peng Fan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190812000115.11d3e7f9@jawa \
--to=lukma@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox