[U-Boot] [PATCH 01/22] tools: imx8m_image: align spl bin image size

[Lukasz Majewski <lukma@denx.de>]

Hi Peng,

> Align spl bin image size to 4 byte aligned, because we need
> to pad ddr firmware in the end of spl bin. However when enable
> SPL OF, the spl dtb will be padded to u-boot-nodtb.bin, then
> u-boot-spl.bin size might not be 4 bytes aligned.
> 
> ddr_load_train_firmware in drivers/ddr/imx/imx8m/helper.c 

I've poked around and there is a U-Boot commit:
e3963c0943042afcb38d99041a8dc3d55f092f5f

Which adds:
"drivers: ddr: introduce DDR driver for i.MX8M"

Is there any documentation on how to use it (any ./doc/ entry)?

I guess that this code (from helper.c) helps with setting DDR4
controller properly.

However, patch 22/22 in this series - which adds EVK imx8m board
- doesn't use this function, but it has hardcoded long table of magic
numbers to setup DDR controller.

I guess that those magic numbers are created from running this code?

If yes - would it be possible to train/setup the DDR4 controller in SPL
as it is done on i.MX6Q? Or at least provide a detailed documentation
on how to use it?

> use 4 bytes
> aligned address to load ddr firmware, so we need make sure
> u-boot-spl.bin is 4 bytes aligned, in this patch we use dd
> to create a new file named u-boot-spl-pad.bin, then pad ddr firmware.
> 
> If SPL OF not enabled, this patch not hurt, because `_end` already
> is 4 bytes aligned.
> 
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>  tools/imx8m_image.sh | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/tools/imx8m_image.sh b/tools/imx8m_image.sh
> index ec0881a128..08a6a48180 100755
> --- a/tools/imx8m_image.sh
> +++ b/tools/imx8m_image.sh
> @@ -35,8 +35,9 @@ if [ $post_process = 1 ]; then
>  		objcopy -I binary -O binary --pad-to 0x8000
> --gap-fill=0x0 $srctree/lpddr4_pmu_train_2d_imem.bin
> lpddr4_pmu_train_2d_imem_pad.bin cat lpddr4_pmu_train_1d_imem_pad.bin
> lpddr4_pmu_train_1d_dmem_pad.bin > lpddr4_pmu_train_1d_fw.bin cat
> lpddr4_pmu_train_2d_imem_pad.bin
> $srctree/lpddr4_pmu_train_2d_dmem.bin > lpddr4_pmu_train_2d_fw.bin
> -		cat spl/u-boot-spl.bin lpddr4_pmu_train_1d_fw.bin
> lpddr4_pmu_train_2d_fw.bin > spl/u-boot-spl-ddr.bin
> -		rm -f lpddr4_pmu_train_1d_fw.bin
> lpddr4_pmu_train_2d_fw.bin lpddr4_pmu_train_1d_imem_pad.bin
> lpddr4_pmu_train_1d_dmem_pad.bin lpddr4_pmu_train_2d_imem_pad.bin
> +		dd if=spl/u-boot-spl.bin of=spl/u-boot-spl-pad.bin
> bs=4 conv=sync
> +		cat spl/u-boot-spl-pad.bin
> lpddr4_pmu_train_1d_fw.bin lpddr4_pmu_train_2d_fw.bin >
> spl/u-boot-spl-ddr.bin
> +		rm -f lpddr4_pmu_train_1d_fw.bin
> lpddr4_pmu_train_2d_fw.bin lpddr4_pmu_train_1d_imem_pad.bin
> lpddr4_pmu_train_1d_dmem_pad.bin lpddr4_pmu_train_2d_imem_pad.bin
> spl/u-boot-spl-pad.bin fi fi 



Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190812/47021532/attachment.sig>