[U-Boot] [PATCH v2 4/4] spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI*

[Lukasz Majewski <lukma@denx.de>]

Hi Tom,

> On Tue, Aug 13, 2019 at 03:47:31PM +0200, Lukasz Majewski wrote:
> > This change allows more fine tuning of driver model based SPI
> > support in SPL and TPL. It is now possible to explicitly
> > enable/disable the DM_SPI support in SPL and TPL via Kconfig option.
> > 
> > Before this change it was necessary to use:
> >     /* SPI Flash Configs */
> >     #if defined(CONFIG_SPL_BUILD)
> >     #undef CONFIG_DM_SPI
> >     #undef CONFIG_DM_SPI_FLASH
> >     #undef CONFIG_SPI_FLASH_MTD
> >     #endif
> > 
> > in the ./include/configs/<board>.h, which is error prone and shall
> > be avoided when we strive to switch to Kconfig.
> > 
> > The goal of this patch:
> > 
> > Provide distinction for DM_SPI support in both U-Boot proper and
> > SPL (TPL). Valid use case is when U-Boot proper wants to use
> > DM_SPI, but SPL must still support non DM driver.
> > 
> > Another use case is the conversion of non DM/DTS SPI driver to
> > support DM/DTS. When such driver needs to work in both SPL and
> > U-Boot proper, the distinction is needed in Kconfig (also if SPL
> > version of the driver supports OF_PLATDATA).
> > 
> > In the end of the day one would have to support following use cases
> > (in single driver file - e.g. mxs_spi.c):
> > 
> > - U-Boot proper driver supporting DT/DTS
> > - U-Boot proper driver without DT/DTS support (deprecated)
> > - SPL driver without DT/DTS support
> > - SPL (and TPL) driver with DT/DTS (when the SoC has enough
> > resources to run full blown DT/DTS)
> > - SPL driver with DT/DTS and SPL_OF_PLATDATA (when one have
> > constrained environment with no fitImage and OF_LIBFDT support).
> > 
> > Some boards do require SPI support (with DM) in SPL (TPL) and some
> > only have DM_SPI{_FLASH} defined to allow compiling SPL.
> > 
> > This patch converts #ifdef CONFIG_DM_SPI* to #if
> > CONFIG_IS_ENABLED(DM_SPI) and provides corresponding defines in
> > Kconfig.
> > 
> > Signed-off-by: Lukasz Majewski <lukma@denx.de>
> > Tested-by: Adam Ford <aford173@gmail.com> #da850-evm  
> 
> Sorry I didn't bisect down to which part of the series is doing this,
> but I see problems with:
> ls1046ardb_sdcard ls1046ardb_qspi_spl ls1043ardb_nand ls1046aqds_tfa
> ls1046aq ds_nand ls1046ardb_qspi ls1046aqds_sdcard_ifc
> ls1046aqds_SECURE_BOOT ls1046aqds_sdcard_qspi ls1 046aqds_qspi
> ls1043ardb_sdcard ls1043aqds_sdcard_ifc ls1046ardb_tfa
> ls1046ardb_tfa_SECURE_BOOT ls1043aqds_nand ls1046aqds_lpuart
> ls1046ardb_emmc ls1046aqds_tfa_SECURE_BOOT ls1046afrwy_tfa ls 1046aqds
> ls1043ardb_nand_SECURE_BOOT ls1046ardb_qspi_SECURE_BOOT
> ls1043aqds_sdcard_qspi
> 
> Some of which are dependency problems about SPL/SPL_DM.  I also see:
>    aarch64: (for 225/225 boards) all -294.2 bss -0.0 data -11.7
> rodata -72.5 spl/u-boot-spl:all -0.3 spl/u-boot-spl:text -0.3 text
> -210.0 [snip] ls1043ardb_nand: all -9435 data -376 rodata -2331 text
> -6728 ls1043ardb_sdcard: all -9435 data -376 rodata -2331 text -6728
>             ls1043aqds_sdcard_ifc: all -9435 data -376 rodata -2331
> text -6728 ls1043aqds_nand: all -9435 data -376 rodata -2331 text
> -6728 ls1043ardb_nand_SECURE_BOOT: all -9435 data -376 rodata -2331
> text -6728 ls1043ardb_sdcard_SECURE_BOOT: all -9435 data -376 rodata
> -2331 text -6728 ls1043aqds_sdcard_qspi: all -9436 bss -8 data -376
> rodata -2324 text -6728
> 
> which I think means a few conversions weren't right.

It looks like some parts of the SPL are not build ....

Is the delta of size available from travis-CI or from any other script
(maybe there is some buildman switch)?

> 



Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190823/04d43479/attachment.sig>