[U-Boot] [PATCH V2 5/6] bmips: bcm63268: add support for brcmnand

["Álvaro Fernández Rojas" <noltari@gmail.com>]

BCM63268 uses 4.0 HW nand controller, which is currently supported by
brcmnand driver.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 v2: no changes

 arch/mips/dts/brcm,bcm63268.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/mips/dts/brcm,bcm63268.dtsi b/arch/mips/dts/brcm,bcm63268.dtsi
index f8a72ef535..5294242529 100644
--- a/arch/mips/dts/brcm,bcm63268.dtsi
+++ b/arch/mips/dts/brcm,bcm63268.dtsi
@@ -141,6 +141,24 @@
 			status = "disabled";
 		};
 
+		nand: nand-controller at 10000200 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm6368",
+				     "brcm,brcmnand-v4.0",
+				     "brcm,brcmnand";
+			reg-names = "nand",
+				    "nand-cache",
+				    "nand-int-base";
+			reg = <0x10000200 0x180>,
+			      <0x10000600 0x200>,
+			      <0x100000b0 0x10>;
+			clocks = <&periph_clk BCM63268_CLK_NAND>;
+			clock-names = "nand";
+
+			status = "disabled";
+		};
+
 		periph_pwr: power-controller at 1000184c {
 			compatible = "brcm,bcm6328-power-domain";
 			reg = <0x1000184c 0x4>;
-- 
2.20.1