[U-Boot] [PATCH v1 3/4] colibri_imx6: remove legacy sdboot wrapper

Igor Opaniuk
2019-10-11T09:57:08Z

include/configs/colibri_imx6.h | 18 ------------------
1 file changed, 18 deletions(-)

diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
index 69bf8225fe..1f2b89e722 100644
--- a/include/configs/colibri_imx6.h
+++ b/include/configs/colibri_imx6.h
@@ -148,23 +148,6 @@
"nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
"&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"

-#define SD_BOOTCMD \
- "set_sdargs=setenv sdargs ip=off root=PARTUUID=${uuid} rw,noatime " \
- "rootfstype=ext4 rootwait\0" \
- "sdboot=run setup; run sdfinduuid; run set_sdargs; " \
- "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
- "${vidargs}; echo Booting from SD card; " \
- "run sddtbload; load mmc ${sddev}:${sdbootpart} "\
- "${kernel_addr_r} ${boot_file} && run fdt_fixup && " \
- "bootz ${kernel_addr_r} ${dtbparam}\0" \
- "sdbootpart=1\0" \
- "sddev=1\0" \
- "sddtbload=setenv dtbparam; load mmc ${sddev}:${sdbootpart} " \
- "${fdt_addr_r} ${fdt_file} && setenv dtbparam \" - " \
- "${fdt_addr_r}\" && true\0" \
- "sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
- "sdrootpart=2\0"
-
#define FDT_FILE "imx6dl-colibri-eval-v3.dtb"
#define CONFIG_EXTRA_ENV_SETTINGS \
BOOTENV \
@@ -180,7 +163,6 @@
"fdt_fixup=;\0" \
MEM_LAYOUT_ENV_SETTINGS \
NFS_BOOTCMD \
- SD_BOOTCMD \
"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
"flash_eth.img && source ${loadaddr}\0" \
--
2.17.1