* [U-Boot] [PATCH] Enable building of u-boot.itb on Rockchip RK3328 platforms.
@ 2019-10-17 19:08 Vagrant Cascadian
2019-10-18 10:24 ` [U-Boot] [PATCH] Enable building of u-boot.itb on Rockchip RK3328 platforms.【请注意，邮件由vagrant@aikidev.net代发】 Kever Yang
0 siblings, 1 reply; 2+ messages in thread
From: Vagrant Cascadian @ 2019-10-17 19:08 UTC (permalink / raw)
To: u-boot
The instructions in doc/README.rockchip for installing rock64-rk3328
make use of u-boot.itb, but it is not built by default.
Add u-boot.itb to BUILD_TARGET for RK3328 platforms.
Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
---
Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Kconfig b/Kconfig
index 66b059f749..16491de83d 100644
--- a/Kconfig
+++ b/Kconfig
@@ -253,7 +253,7 @@ config BUILD_TARGET
default "u-boot-spl.kwb" if ARCH_MVEBU && SPL
default "u-boot-elf.srec" if RCAR_GEN3
default "u-boot.itb" if SPL_LOAD_FIT && (ROCKCHIP_RK3399 || \
- ARCH_SUNXI || RISCV)
+ ARCH_SUNXI || RISCV || ROCKCHIP_RK3328)
default "u-boot.kwb" if KIRKWOOD
default "u-boot-with-spl.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
default "u-boot-with-spl.imx" if ARCH_MX6 && SPL
--
2.20.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [U-Boot] [PATCH] Enable building of u-boot.itb on Rockchip RK3328 platforms.【请注意，邮件由vagrant@aikidev.net代发】
2019-10-17 19:08 [U-Boot] [PATCH] Enable building of u-boot.itb on Rockchip RK3328 platforms Vagrant Cascadian
@ 2019-10-18 10:24 ` Kever Yang
0 siblings, 0 replies; 2+ messages in thread
From: Kever Yang @ 2019-10-18 10:24 UTC (permalink / raw)
To: u-boot
Hi Vagrant,
On 2019/10/18 上午3:08, Vagrant Cascadian wrote:
> The instructions in doc/README.rockchip for installing rock64-rk3328
> make use of u-boot.itb, but it is not built by default.
>
> Add u-boot.itb to BUILD_TARGET for RK3328 platforms.
>
> Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
> ---
>
> Kconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/Kconfig b/Kconfig
> index 66b059f749..16491de83d 100644
> --- a/Kconfig
> +++ b/Kconfig
> @@ -253,7 +253,7 @@ config BUILD_TARGET
> default "u-boot-spl.kwb" if ARCH_MVEBU && SPL
> default "u-boot-elf.srec" if RCAR_GEN3
> default "u-boot.itb" if SPL_LOAD_FIT && (ROCKCHIP_RK3399 || \
> - ARCH_SUNXI || RISCV)
> + ARCH_SUNXI || RISCV || ROCKCHIP_RK3328)
It will be better to use ARCH_ROCKCHIP, because other SoC like RK3368
may also need this.
Thanks,
- Kever
> default "u-boot.kwb" if KIRKWOOD
> default "u-boot-with-spl.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
> default "u-boot-with-spl.imx" if ARCH_MX6 && SPL
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-10-18 10:24 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-10-17 19:08 [U-Boot] [PATCH] Enable building of u-boot.itb on Rockchip RK3328 platforms Vagrant Cascadian
2019-10-18 10:24 ` [U-Boot] [PATCH] Enable building of u-boot.itb on Rockchip RK3328 platforms.【请注意，邮件由vagrant@aikidev.net代发】 Kever Yang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox