[U-Boot] [PATCH 4/4] imx: cx9020: use distro boot

[linux-kernel-dev at beckhoff.com <linux-kernel-dev@beckhoff.com>]

From: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>

We switch from custom boot commands relying on uEnv.txt to distro boot.
This removes the automatic fpga bitstream loading in favor of loading
bitstreams via custom bootscripts (boot.scr) or after booting the
kernel.

Acked-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
---
Checkpatch complains with:
>  include/configs/mx53cx9020.h:51: check: Macro argument reuse 'func' - possible side-effects?
Is this expected? I can't see what's wrong though i may have missed
something obvious.

 configs/mx53cx9020_defconfig |  1 +
 include/configs/mx53cx9020.h | 88 +++++++-----------------------------
 2 files changed, 17 insertions(+), 72 deletions(-)

diff --git a/configs/mx53cx9020_defconfig b/configs/mx53cx9020_defconfig
index d9c0637110e..ef5cb9775a2 100644
--- a/configs/mx53cx9020_defconfig
+++ b/configs/mx53cx9020_defconfig
@@ -7,6 +7,7 @@ CONFIG_NR_DRAM_BANKS=2
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/beckhoff/mx53cx9020/imximage.cfg"
 CONFIG_BOOTDELAY=1
 CONFIG_USE_PREBOOT=y
+CONFIG_DISTRO_DEFAULTS=y
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
diff --git a/include/configs/mx53cx9020.h b/include/configs/mx53cx9020.h
index 5f35be5ab00..db40fe71b36 100644
--- a/include/configs/mx53cx9020.h
+++ b/include/configs/mx53cx9020.h
@@ -21,7 +21,7 @@
 #define CONFIG_SYS_FSL_CLK
 
 /* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)
+#define CONFIG_SYS_MALLOC_LEN		(32 * 1024 * 1024)
 
 #define CONFIG_REVISION_TAG
 
@@ -48,83 +48,27 @@
 
 #define CONFIG_LOADADDR		0x70010000	/* loadaddr env var */
 
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(MMC, mmc, 1) \
+	func(USB, usb, 0) \
+	func(PXE, pxe, na)
+
+#include <config_distro_bootcmd.h>
+
 #define CONFIG_EXTRA_ENV_SETTINGS \
-	"fdt_addr_r=0x71ff0000\0" \
+	"fdt_addr_r=0x75000000\0" \
 	"pxefile_addr_r=0x73000000\0" \
-	"ramdisk_addr_r=0x72000000\0" \
+	"scriptaddr=0x74000000\0" \
+	"ramdisk_addr_r=0x80000000\0" \
+	"kernel_addr_r=0x72000000\0"  \
+	"fdt_high=0xffffffff\0" \
 	"console=ttymxc1,115200\0" \
 	"stdin=serial\0" \
 	"stdout=serial,vidconsole\0" \
 	"stderr=serial,vidconsole\0" \
-	"uenv=/boot/uEnv.txt\0" \
-	"optargs=\0" \
-	"cmdline=\0" \
-	"mmcdev=0\0" \
-	"mmcpart=1\0" \
-	"mmcrootfstype=ext4 rootwait fixrtc\0" \
-	"mmcargs=setenv bootargs console=${console} " \
-		"${optargs} " \
-		"root=/dev/mmcblk${mmcdev}p${mmcpart} ro " \
-		"rootfstype=${mmcrootfstype} " \
-		"${cmdline}\0" \
-	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-	"loadpxe=dhcp;setenv kernel_addr_r ${loadaddr};pxe get;pxe boot;\0" \
-	"loadrd=load mmc ${bootpart} ${ramdisk_addr_r} ${bootdir}/${rdfile};" \
-		"setenv rdsize ${filesize}\0" \
-	"loadfdt=echo loading ${fdt_path} ...;" \
-		"load mmc ${bootpart} ${fdt_addr_r} ${fdt_path}\0" \
-	"mmcboot=mmc dev ${mmcdev}; " \
-		"if mmc rescan; then " \
-			"echo SD/MMC found on device ${mmcdev};" \
-			"echo Checking for: ${uenv} ...;" \
-			"setenv bootpart ${mmcdev}:${mmcpart};" \
-			"if test -e mmc ${bootpart} ${uenv}; then " \
-				"load mmc ${bootpart} ${loadaddr} ${uenv};" \
-				"env import -t ${loadaddr} ${filesize};" \
-				"echo Loaded environment from ${uenv};" \
-				"if test -n ${dtb}; then " \
-					"setenv fdt_file ${dtb};" \
-					"echo Using: dtb=${fdt_file} ...;" \
-				"fi;" \
-				"echo Checking for uname_r in ${uenv}...;" \
-				"if test -n ${uname_r}; then " \
-					"echo Running uname_boot ...;" \
-					"run uname_boot;" \
-				"fi;" \
-			"fi;" \
-		"fi;\0" \
-	"uname_boot="\
-		"setenv bootdir /boot; " \
-		"setenv bootfile vmlinuz-${uname_r}; " \
-		"setenv ccatfile /boot/ccat.rbf; " \
-		"echo loading CCAT firmware from ${ccatfile}; " \
-		"load mmc ${bootpart} ${loadaddr} ${ccatfile}; " \
-		"fpga load 0 ${loadaddr} ${filesize}; " \
-		"if test -e mmc ${bootpart} ${bootdir}/${bootfile}; then " \
-			"echo loading ${bootdir}/${bootfile} ...; " \
-			"run loadimage;" \
-			"setenv fdt_path /boot/dtbs/${uname_r}/${fdt_file}; " \
-			"if test -e mmc ${bootpart} ${fdt_path}; then " \
-				"run loadfdt;" \
-			"else " \
-				"echo; echo unable to find ${fdt_file} ...;" \
-				"echo booting legacy ...;"\
-				"run mmcargs;" \
-				"echo debug: [${bootargs}] ... ;" \
-				"echo debug: [bootz ${loadaddr}] ... ;" \
-				"bootz ${loadaddr}; " \
-			"fi;" \
-			"run mmcargs;" \
-			"echo debug: [${bootargs}] ... ;" \
-			"echo debug: [bootz ${loadaddr} - ${fdt_addr_r}];" \
-			"bootz ${loadaddr} - ${fdt_addr_r}; " \
-		"else " \
-			"echo loading from dhcp ...; " \
-			"run loadpxe; " \
-		"fi;\0"
-
-#define CONFIG_BOOTCOMMAND \
-	"run mmcboot;"
+	"fdtfile=imx53-cx9020.dtb\0" \
+	BOOTENV
 
 #define CONFIG_ARP_TIMEOUT	200UL
 
-- 
2.23.0